How to put 4 Felony Rear Hoons on an Infraction!
ฝัง
- เผยแพร่เมื่อ 11 เม.ย. 2021
- Hi Gang,
Putting Felony Rear Hoons on an Infractions is one of the most wanted mod to do, but most don't know how. Watch this video as I explain how I mounted Felony Rear Hoons on my Infraction as well as tire and rim options for drifting!
Please help me grow by Liking and Subscribing to my Channel and visit my IG page @WatsNu2Day!
Thank you for watching! Aloha!
You can email me at:
watsnu2day@gmail.com
Instagram at:
@watsnu2day
![แม่กลองสองใจ - ซีแกรม โตเกียว มิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/GSQfVjcr_f4/mqdefault.jpg)
Good luck with the channel! I chucked my infraction tires and this came in at the perfect timing
Thank you. I live my infraction so.much that I sold my Felony. It's the same basically, but the infraction seems much more fun.
Believe these Felony rears would look really cool on the limitless, since theirs no fender over them 👍
I used the same tire set up on my Senton 3S using the HR Hub assembly. No more blown tires..
Hi,
Very grateful for you. If I never smoke the tires by the handbrake, will the tires last normally?
Thank you
Regardless,...the power it.puts down and running on hard surface will eat up tires alone. You can mKe.them.last longer either running 50 or 75% or smaller.lipos.
I have seen the rear felony tires on the limitless. It looks good just like your truck
No. I dont have. Limitless because i really dont have room to do top speed runs. Those things can get pretty fast and i usually just drift my infraction.
I dont think the drag brake will work as well with the felony wheels but could be wrong?
Thay do look good
Have you tried the PROLINE POXES? part #10200-1
Did this to my Kyosho Inferno Demon.
I like the dboots on my vorteks.
Only thing is the wheels are not to sturdy.
I've got major balance issues with those wheels.but strait out of the box the tires are sticky.
Use modeling clay to balance your wheels.
How did you cut the infraction body? What did you use? @WatsNu2Day
I used body scissors for plastics, curved edged ones.
s5 tires are softer than s7's
It is? I thought it was the other way around. At least i have another set to burn. Lol!
@@watsnu2day Yeah if you look it up S1 is softest s7 is medium hard which is the hardest
I use the grp slicks
I have grp s5 and s7 but the hons are beefier and look cooler on the vortek
Could just flip your front body mount upside down. Then your posts aren’t maxed out
Thanks for the info and teaching me. Now I know..
No this video is old but does anyone know if these wheels rub on full lock? I wanna try them because of how much longer they'll last but don't want it to mess my turning circle
I had to trim the body on my infraction a bit and lift it
@@watsnu2day but other than the body trimming they work? Will be looking at upgrading the diifs to uphold them too
@@watsnu2dayand the main thing is do they last longer? As long as they preform same as the smaller ones and kast a little longer ill be trying this
It rubbed up front . The back is normally wide tires ready
💪🏽🇬🇧👍🏽
Its good infraction run on felony tires?
Yes, if you have it on all 4 sides.
@@watsnu2day stock tire or felony tire do you feel better?
Really, the felony tires on all 4 is mostly for looks. Save money and go with GRP or stick to stock setups for drifting and bashing.
@@watsnu2day for track,goods on felony tire?
Bro you didn’t even change them
You burn up that diff yet
I'm getting my infraction 6s tomorrow I know nothing about this truck you said did you burn up the diff yet do the disc go out easy on these or is it because by putting the bigger hoon tires on it will burn the diff out
I did this and burn up my center diff you have to upgrade diffs if your gunna use the felony tires and I only use the felony tires on the rear
@Savagercs703va how does that setup work? I've been debating it as these tyres look like they'll last longer and have the same compounds as the smaller ones
you went too far brother. Just trimvthe fenders and cut the body like the Honnigans built the Hoonitruck. easy peasy. Did it mysef. Mines 8s as well.196 mph.
Don’t be afraid to grab the camera and actually show us what the hell your pointing at throughout the WHOLE video
Ok then,..,,
Kinda seems like you didn’t have to trim the splitter all the way to the outer edge? Is that wrong?
I trimmed what was necessary for clearance. Your trimming may defer depending how your body and front splitter clears.
@@watsnu2day I just ordered mine so I don’t even have it yet, but I’m definitely gonna do this. Thanks for putting this out there.
You’re welcome. Don’t forget to subscribe to the channel and reply with “Subscribed” so I know you did so. I appreciate the support!