ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2024
- How to program a new remote without an old one. No dealer needed! I couldn't find a video on how to do this so I made one.
The buttons on my old remote fell out. I didn't want to spend time at the dealer and spend a small fortune so this is what I did. You don't need the pin tool contraption if you have a small enough tool to remove the pin without damaging it. But it was so much easier with it. Amazon sells it but if you can wait you can get it even cheaper. Good luck!
Key Vice on Amazon: www.amazon.com...
1st round was 10 mins, 2nd round was 10 mins, 3rd round blinked off and back on at 10 mins, I waited an additional 25 mins to be safe, light was still on when I took the key out. Then I waited 20 secs to put the key back in to check. Light stayed off and it started. I left the car running for a bit, then turned it off. I tested the buttons and they all worked. Thank you so much!!! It's alive! Just replaced the fob cuz the buttons all broke, transferred the old blade over.
This worked on my brother in laws 2014 chevy Cruze. Only problem is after the first cycle it said “theft attempted” so we had to restart and do it 3 more times. On the third cycle after 10 minutes it blinked off but came back on. So we let it sit for another 30 minutes (40 minutes total for the 3rd cycle) then took the key out and tried using the key. Key ended up working perfectly after that. Thanks so much!!! Took us 70 minutes total to program the new key!
This worked for my 2015 Malibu thank you very much I’m leaving a well deserved like and this comment, honestly I didn’t expect it to work and felt bad of buying the remote at O’Reillys because I just started working there and didn’t wanna return it but thanks to you it all worked thanks for the video
I'm in the the third cycle of this process and have been patiently waiting for 20 minutes. I'm praying this works because if it does, I'm getting another key fob. Your instructions were much clearer than other people's. I will update when I am finished.
Another way you can do it is to start the car with the original key and then turn it off and put the new key in right behind it this was very helpful and full details
That worked for me for one fob, but not the other. Got this theft deterrent screen too. So I'm gonna try this method and see if it works. I'll report back!
Thank you so so much. Started out with the alarm on, switched out the old fob with my new fob and use my original key by taking out the pin. Went to the car unlock the door and the alarm sounded. Put the key in the ignition turned to "B" waited 10 1/2 minute. Turned it back to the original position "A". Waited for alarm to go off (it was loud). Turned the key to "B" waited 10 1/2 minutes again. Turned back to "A" then to "B" the "THEFT DETERRENT" signal went off. Started car and all buttons on FOB work!
So glad that you posted this 2years ago!! It helped me a lot with my 2012 Chevy Cruze! Thank you so much!
I'm so happy it was helpful. 😊
I gotta Cruze. The previous owner had a genuine key purchase cut and programmed .
Cost about $850 (AUD).
I can purchase a after market skin for $15 or a full key/remote for less than $50.
Don't know where you got proceedure from to reprogram, but it works.
Great knowledge to learn.
Thanks for the share👍💖
I have a 2019 Chevy Cruze, this did work with one additional step. First of all I started with a blank key also but I had mine cut at the dealership for around $6.00. I did the 3 steps she shows but I still had a "service theft deterrent system. The last step is to put your old key in and turn it to the run position " position b". Then your " service theft deterrent system" message will go away when using the new key.
Very cool, it's a great feeling when you can do things yourself.
This helped me! Thank you. Third time, System Deterrent did not go off but I had already waited 40 mins just on 3rd cycle. So I winged it and turned key back to start, removed, and put back in. Boom! All squared away. Thank youuu
Great job!
thank you so much for this video!! I waited 30 min on the last round and the sign didn’t go so I took the risk of just starting all over but it freaking worked!! thank you so much ❤️
I'm so glad it was helpful! 😊
Only video that talks about this bs there deterrent bs thanks!!!
My favorite part, dealership needs to send the key to Rumania!!! 😆😆😆😂😂🙃😉
Thank you so much!!! It worked exactly like you said. On the third cycle I waited 25 minutes, the light didn't turn off. So I turned it off, took the key out, then put it back in to start it, and it worked! You're a life saver.
@holls, Help!!! I cannot get this to work.
@@ajw5604 did ya get it
@@natestreif5013 no. Had to get a new FOB and programming by dealer.
THANKS! HAVE A 2014 CRUZE AND AFTER 20 ISH MINUTES ON THE THIRD CYCLE THE THEFT LIGHT WOULDNT GO OUT SO I RISKED IT AND BOOM TURNED ON AFTER
I went to see your video because I got anti-lock mode on the screen trying to program a new control with the old key. I got scared and took out the key and put it in the old control. Now I saw your video and I will try it later. Thank you.
Good luck! You've got this. 😊
Thank you for your video I was able to program my new key fob with the original key blade. Now my security light is off you are getting a like on your video.
Thank you very much for this...worked exactly like you said it would. 10 minutes, 10 minutes, and 25 minutes, then good to go....yay
Glad it helped
You're so awesome! This worked on my daughters 2013 Chevy Sonic. We were out there for about 45min to an hr but it worked. It was worth it. We talked and laughed the whole time! Thank you!😁
So happy this helped! And valuable time with the kid is priceless. ❤️
Thank you very much! Mine worked and did the exact same thing yours did on the 3rd cycle
Glad it helped
Thank you thank you thank you this video was a life saver. I appreciate you posting this so much.
Good ugguggg6
Thank you so much!
You saved me $500 bucks
Excellent!
I have done 3xs 10 min cycle 4x’s and light theft deterrent stays in never turns off!
It worked!!!!!! Thank you very much!!!!!
The third time it just flashed and left in for another 10
ty this helped and worked .i also only had my one broken key fob and no spare, just took out the pin and put it on a cheap fob ,,,, the warning didn't disappear on the third try after 40 minutes so i took the chance and it worked luckily lol, 17$ key fob on amazon with next day shipping and I got it done in one day lol tysm
I tried doing this but my alarm keeps going off. Did you have that problem
My alarm just went off did you ever figure it out
@@natestreif5013 That was a while ago but if you follow the instructions I actually programmed my key without any other key just with the car. There is a video on TH-cam that shows you how to do it and it actually worked for me.
you are a SAINT I tell you. thank you so much.
Thank you so much I did wait 30 minutes before I got the light off, really helpful information. God bless and thank you again, happy Thanksgiving.
Good video Holls and great job on the remote rebuild.
Thank you millions muchas gracias greetings from Mexico ❤️
Are you sitting in the car for this whole time? Or can I just walk away with it in ?
The key works which is great but do the buttons work to romotely unlock and lock the doors?
Where did you get the instructions to program the remote?
Some folks say just put a good key in and turn to start and then off followed by the same with the new key. I tried that and it didn’t work but would allow me to start the car. Next retry it failed so I like her way the best!
Thanks Robert! Glad it was useful. 😊
Unfortunately,this did not work on my 2015 Chevy Malibu.The theft deterrent service message never turned off-not once.
I have a Cruze 2015 full, but the remote does not open the car, and I went to more than one mechanic who says that he does not know where the problem is, in addition to that the air conditioning of the car is very weak when the car is stationary or walking slowly, but it is strong when it is walking fast
Does the pin have to be taken out to work I can’t get it out it fell out before I watched this video and I put it back in now I can’t get it out and the key blade doesn’t shut
Did your alarm go off at first?
I’ve been waiting for 37 minutes on that last try, but nothing is happening. Should I start all over again?
Hello, old post but very useful I hope you can help me with answer. I used the same same method you explained it programmed my new key only to start car but it's not locking or unlocking the car or opening trunk. I have original key frequency 315mhz and replacement key 433mhz does these two frequencies makes any difference? Please need help..
I would try the process again and be sure to leave it in position long enough each time. Good luck!
Holy cow it really worked. Thank you so much
Update: hahaha, my battery died so i have no clue if it worked or not. Walked away with a nasty headache and very sweaty.😢
Hi, Thanks for the video very helpful ,can you tell me where you got the key romover or can I take it out using something else?
I put the link in description for Key Vice. A small pin tool and a hammer might work if you have a way to hold the fob still...
Does the new programmed key make the original key not work?
Can you do it without the original key? I lost mine but I bought a replacement and don’t want to pay extra
I'm assuming you had a replacement key cut? If so then yes, it should work. I just needed a new remote but not key. That's why I did it this way.
You are awesome! My fiancé says thank you as well!
What should I do if by 10 minutes, the theft deterrent system light does not goes off ? Not even in the first cycle
I am having the same problem. Did you solve it?
Any answer to this question?
Same here
This does not work without another key
Good job! Right now I have a key Immobilizer problem. Want to fix it for me?
Thanks love I was able to program my car ❤️❤️❤️
Help!! I have destroyed my key fob but still have my key I’m getting a new key fob now and going to follow the directions you give in video on my Chevy Equinox 2015 but the anti theft came on….. any suggestions
It's supposed to come on. Watch the video.
Mine it did make the car turn on but it does not lock or unlock my 2011 chevy cruize with the control its all new battery
We're did you get the new key fob
Question so i have a push to start how do you fix it
What if the security light is flashing and don’t go off
Works on 2017 Chevrolet Cruze
You sure it was 5sec off or 10 sec off?
Did this and now my push to start won’t work, any suggestions
My open and close buttons don’t work now. Can someone please help?! 😞
Replace the battery on your fob
so my chevy is stuck in the anti theft lock, all of my FOB buttons are gone and have been gone for years. do i need a new key to get my car out of this lock?? the manual key works and i’ve never had this problem before, im losing my mind over this lock and i’m not sure what the actual problem is. i don’t want to invest in a new key if it isn’t the key itself. PLS HELP
Is it possible the fob battery is dead? Why not just invest in a new fob and put the old key in like I did?
Definitely worked for starting my car but my buttons don’t work
That is odd. Maybe try the process a second time?
Thank you so much worked on my 2016 chevy cruzw
Will this work if the service theft deterrent system on a Chevy Cruze 13
It should.
Thank you! This worked for me ❤
I'm so glad! 😊
Very good video and explain.
What did you do to the old key fob?!?! hehe
I ate it.
Hey after the first cycle the security light didn’t come back on should I still keep on with the cycle ?
I suppose not, if the remote is also working.
holls it didn’t work could you email me I have some questions if you don’t mind thanks. rodser96@gmail.com
@@St8HbS if it didn't work I would start over. Hopefully you've figured it out by now. Sorry for the late reply.
yay i needed this video
Where did you purchase your new key fob?
I have the same one but for a Buick Verano.
Ebay
Can you do this with your current key? Nothings wrong with my kwy
Yes. I didn't get a new key cut. This is just the steps to program a new fob.
Went to Florida for 2 weeks car sat and lock light came on car locked up wouldn’t start. Along with that theft lock thing after doing your cycles my battery light thing came on and it won’t start when at first it wouldn’t start and it would lock up but now just won’t start. I’m gonna get a jump well see
Maybe disconnect and reconnect the battery? Doesn't sound like a remote programming problem...?
5:33 6:27
Great video thanks!
Como yo sabre si en verdad program programaste la llave, cortas el video y al ultimo dices que lo lograste,pudo haber sido la llave original, bueno disculpa tengo el mismo problema con mi cruze 2013 y lo hice tal como lo explicas y no se programa mi llave nueva
Pudiste solucionarlo? Tengo el mismo problema
What security light please point
Hi Mari. I'm not sure what your asking? The security light is likely a reference to the anti theft message on the screen.
You did a great job
Thanks very much
What is that holder thing called?
key vice
You are a super hero ❤
Why is that light that looks like a bottle turning ln
I'm doomed, I tried to start it.
I'm trying to figure out how everyone is saying this worked but I did exactly this and it did NOT work. Did I need a new key or key remote?
This was done using one key and putting it into a new remote. I only had one key.
Weird my light just blinks constantly... and didn't stop or go out after the 1st 10 min... what a crap car i bought ... lol problems since day 1
I’m having the same problem 😕
Did you solve it?
The best way to do this to your “crap” car is to pay a pro to do the job right. This is just a cheap and inexpensive way of doing things.
I tried that since yesterday,it's not working.what am I doing wrong? the security feature never goes off or blink
It’s not working for me…. 😢 lol your better than most with the info tho
where’d u get it from
The remote or the other contraption?
What is the device called and where did you get it from (that holds the key)
it’s called “Flip Key Vice Fixing Pin Remove Tool Fit For Car Door The Repair Tool Fabulous” for the people who’s wondering 👌👍
Does the fob or remote starter you bought have a chip in it? and how much was that tool you bought to get the key out?
i followed your instructions and my light still on the vehicle not starting i boght new key from dealership
LTZ 433 mhz
LTZ 315? mhz
I did exactly what you said the only problem is my car goes start popping alarm sounds between position A and B
Thanks so much 🙏
My alarm keeps on going off
What did you do to fix it? I’ve tried everything. A 2012 Cruze
I have that problem now my Chevy Cruze 2015
I hope you are able to fix it.
Link buy
Thank you !!!
I tried it multiple times and didn’t work😣
Oh no! I'm sorry to hear that.
Mine light not turning off after ten minutes
The third time it won't it seems. So after 15 min. Turn it off, remove key, then try to start the car.
Read some of the other comments. This is common.
My alarm goes off .. horn honking
I need help on mines
Did you figure it out?
That is only sinking the old key in a new she'll
Make sure u have a extra battery lol
This does not work if you don't have another key
It does. I only had one key ever.