I’m 22 and I’m honestly just now learning and applying myself to electronics and I’m in tears, I wish I was like you growing up! Youre so inspiring dude! Keep killing it!
I am starting at 34 yo :-) I have been working as programmer for a 8 year now and I got tired of the fact that when I turn off my computer, there is nothing. Electronics are tangible :-)
@@GreyDeathVaccine I resonate with that so much! things on the software side is cool but physically building things and piecing things together has such a different satisfaction to it!
good for you, young man. May i kindly suggest, that you obtain and install a 4 inch fan, (ALOT QUIETER) from your parts, and attach it to a dryer vent hose, and have a stove range hood over your de-soldering area. Vent that exhaust outside, if you can. I've been doing this along time, and that poison WILL HARM YOU....keep on going...
I'm 38 and only now getting into hobby electronics, this video is a lifesaver and very informative, thank you! I had an old lcd tv that the screen broke and the lcd ruined, so i just today took it apart and saved the boards and useful parts, now i'm going to begin unsoldering!
Aside salvaging the components, you can also repurpose whole boards as they are; for example, I used a microwave oven control board to command a UV lamp for erasing EEPROMs or for making PCBs. As is essentially a timer, I choose one with display (VFD) that also display the remaining time. Other repurposed thing was a garage door controller with its own remote control to switch on or off the outside lights. The limit is your imagination.
Sooo encouraging. Good on you. I'm almost 56 yo and have lived offgrid for my whole adult life. In that time, I've watched seven very expensive inverters and other components of my solar system become junk when capacitors blew from old age or when they were struck by lightning surges. I get a lot of those here. I'm really over having to replace fixable gadgets I've paid a fortune for with new ones that arent so fixable because technology has changed and that excuse that "it's too expensive to fix and it's cheaper to by a new one" gives me no choice BUT to buy a new one. I fixed a junked spotlight torch the other day just by resoldering two wires. It had been dumped in the local skip. That was a simple fix I could do myself. An inverter is a safety issue, so I've enlisted a local electronics genius (like you) to teach me the basics and help me fix the latest casualty, the latest inverter that died from old age. It just needs some new capacitors to breath new life into it. And where will i get those capacitors? From broken gadgets. Great video. Good to see a young strapper innovating with old stuff in a world where old stuff isnt useful any more.
I like to geat my electronic components by salvaging from circuit boards and it always make me imagine i'm in a post apocalyptic world of mad max lol ..
my skype：Juven-3e our company doing elec components include IC transistor diode relay switch RES and Capacitors brand new original quality price much better than Mouser Digi-Key alibaba aliexpress ebay amazon，contact me bro no credit no business thank you
This is a great video! Reuse is the most effective form of recycling. In the late 60s and early 70s, I lived out in the boondocks of Northern California. (Red Bluff is a good place to be from. As far from as possible! But, I digress.) The Tehama county dump (land fill in modern speak) was one mile away overland. I'd grab the big Radio Flyer wagon, and some ropes, and off I'd go, over hill and dale. Hours later in the 110+ degree (F) heat, I'd return home with a console color TV, standing up on end, strapped to the wagon! And they claim nerds don't get any exercise. Wrong! I built most of the SW radio receivers in the 1954 ARRL ham radio hand book, with the parts I scrounged from old TVs, tape decks, radios and mystery items. The first 4 track cartridge tape player I found baffled me for a couple of years until I saw my first 8 track unit! I was only 10 years old in 1967! I used a propane torch to heat the PCBs to get the parts out.
You remind me of myself when I was 15 and salvaging old electronics from broken neighbours devices and use it to build led flasers and radio transmitters. Now I am studying electrical engineering.
That is the way I started back in the 70's , I would salvage parts for Henpol TV Repair. They taught me parts and then how to use them. It is a great way to learn the skills needed. Ham Radio operators are doing this as well. This is wonderful to see, made my day
They don't complain anymore when you get their (formerly $1000) obsolete, no-longer-available-for-sale hot tub circuit board up and running again for free. All their friends had to make their hot tubs into giant planters, theirs is humming along with fresh relays and electrolytic capacitors.
I suggest taking all the ceramic capacitors (the blue flat ones) since they are useful for high voltage projects such as voltage multipliers and high voltage capacitor banks
I do the same thing... And I ain't no kid. Good job well done mate! Just one thing, I find that it is worth desoldering the little resistors, not because they are expensive but it means that there is more chance of you having the right resistor when you need it. It means you have a wide selection when you start making your electronic gadgets in the future. Just a thought. Peace from Scotland 🤓👍🏴
Nice video. Great to see young people enjoying electronics. I've been salvaging components since I was about 8 years old. It was much easier back then as few components were proprietary. Today, so many components are difficult to reuse or just too small to deal with. Markings can be custom to a manufacture and no datasheets available. But it also depends on what you want to make. Most any transistor can be used for simple switching regardless of its value. Oh, and defiantly hang on to those Flyback's. You can have a shockingly good time with them. 😎 Keep on salvaging...
Thank you. I’m new to hobby electronics so this was very useful. One question though: wouldn’t static electricity be a risk factor when you place your circuit boards on a carpet like that?
Maybe it's just me but I do not often salvage electrolytic caps from old PCBs especially high hour boards like those from old CRT and flat screen TV sets and monitors. Especially where heat is a factor involved.. Desoldering parts you can also use one of those cigarette lighter jet torches and heat the backside of the pcb up and occasionally tap the board on the ground or bench to knock parts off.. it's alot faster. When dealing with appliances like say a coffee maker. You can use the PCB intact but instead of turning on a heating element you can have a timer based system to turn on lights that run from the AC mains. I recycled a Kurig coffee maker into a dusk till dawn timer that operated a high current HVAC contactor to turn on bug sodium lamps on my property.. Same principle holds true for RF based remote controlled systems like a garage door opener.or a car alarm with remote key entry. I typically do not scavenge those PCBs right off for bare parts if I have a transmitter receiver paired device that still works because I know I can re-engineer them into another system. Also the appliances hold other goodies other than just PCBs. They may have meters, LEDs, sensors, switches, terminals, etc that are not on the actual PCB itself. Before salvaging parts you need to identify why the appliance the PCB came out of was file 13ed in the first place.. Find the bad part(s) so you know not to save them.. Those windowed IC's may or may not be useless depending on what they are. If they are UVPROMs then whatever programming they had on them is gone now since the windows are exposed.. EPROM and E2PROMS are more useful ONLY if you have the proper instructions and programmers / Burners for them. I have a pile of similar EPROMS that came out of old Motorola Syntor mobile 2-way radios but they are 100% useless in todays world since the programmer required an XT based PC
Thanks bud. Just started bout a year ago getting into electronics like this. And I have built some amazing stuff since then. Keep it up kid. Wish I got started as young as you did. Now for builds. Get into power walls and solar, wind, water for power. N teach me more. Thanks bud.
9:00 Even after a long time since the board saw power, you will want to use a resistor to discharge each capacitor before handling it (and especially before handling the pins or through-hole). Use insulated pliers or something else electrically isolated to contact the resistor to the capacitor. How long you hold depends on the values on the cap and the value of the resistor. It's not safe to just short it out - that can actually be pretty dangerous!
Good video pal! You forgot to mention that opening devices and salvage components, you can always learn something new and can give you ideas for diy projects. For example a clever construction or try to get better at soldering or try something new with a new component found you didn't know it exists. Good practice to search the partnumber to see what it is exactly. It is also a kind of training to easily recognize components just by looking at it or configuration or just by part number. Very good practice. I collect also buttons, panels, plastic parts, gears and cabinets and can be very useful even when you have already a 3D printer. Some design stuff cannot easily made with a 3D printer or you don't need it anyway because the part is already useful. So yeah, that can be also a part of the job. ;-) One warning before take apart devices that can hold a high voltage charge, be sure there is no charge left inside capacitors. Very important to mention here because you talk about CRT televisions and power supplies. Be careful. Also be careful with the fumes that releases when desoldering parts. Many PCBs have old flux residue or other unknow chemicals on it. Burning the PCB is not a good idea. Overall, good video and hopefully this video will stimulate people to do the same to learn, to practice and to reduce the pile of e-waste a little. Thumbs up! 🙃🙂👍
You can save a a fair amount of time desoldering scrap parts using a cheap heat gun and an air compressor. I'm sure you get the idea. Heat the solder and blow it off. I would recommend a sheet metal kinda backsplash to cut down on solder mess. DRESS APPROPRIATELY!
I also really love desoldering components from circuit boards. You can sometimes get components that you can't easily buy or components that are expensive. I recently found an old stereo receiver dumped on the side of the road and there are lots of useful components inside.
Great videos Tanner. Quick question regarding safety in dismantling circuit boards. Many of these boards use large capacitors that could deliver a very bad shock. I know capacitors can hold a charge even when unplugged. So, how do you ensure the capacitor is safe to touch? How do you get rid of this voltage and when do you do this? Thanks and great videos!
Well, all of my circuit boards have been sitting in that box for a long time. So any residual charge would have been dissipated due to parasitic resistance. In other cases where the board that is being dismantled is newer, the capacitors could still have a charge. To solve this issue, just touch a screwdriver to the two terminals of the big electrolytic capacitors on the board.
It would probably be better to use a resistor to discharge large capacitors so you don't damage the component or the screwdriver. ;) Could even get some solid core wire take one of those larger white ceramic resistors and craft a little discharging tool. Using a screwdriver on a larger charged capacitor could arc and that could take little chunks off the screwdriver and with the resistor you can convert that charge into a little heat over 15 seconds or so depending on cap/resistor value nice and easy instead of poking at them like a volatile explosive.
If you want to discharge capacitors from a freshly used circuit board I take a screw driver and scrape it against the backside because all you need to do to discharge the capacitor is short the leads. As long as you are insulated from the metal you will not get shocked. However you should be more aware of potentially shocking yourself with acatgode Ray tubes. As Tanner said in the beginning regarding the first circuit board he discussed, the flyback Transformer can get to 35,000 volts and the inside of the CRT can remain charged just like a capacitor and the CRT is pressurized and will shatter in an explosive manner if not handled properly (however I have never ever heard of anyone getting hurt that way and I have taken apart many old CRTs).
Hahaha... I got even with my big brother with a condensor, one of the old points n condensor style. He would always come and take things I was work with. Charged it up, you could touch the can or the connection but not both. I noticed when he picked it up, and it still played along... He dropped it in his pocket... the wait was hell, but then I heard the pop and saw the look on his face. He took it out of his pocket and placed it carefully back on my table... He said "you got me" very quietly and walked away. Now before you say I could have hurt him, you need to know he was a lot bigger, older, stronger and significantly meaner. I had to learn, devise a way to make us equal. He learned while he could always push me around.... I would get him back, eventually! 😉
@7:47 & 12:15; "TO-220 package" is what I think you meant to say there, lol!... That is what style package those larger transistors and MOSFETs are, NOT "TO-22", as you were saying. Also, @12:50; the TL780 series from Texas Instruments are indeed voltage regulators, but that number is only the first part of the full complete part number, and if ONLY given that number you cannot definitively tell what voltage the regulator puts out... you have to ALSO look at the -05, -12, etc. part after that *series* number in order to tell the voltage output. (-05 is 5V, -12 is 12V, etc.) Where did you get that component tester that you use towards the end of this video? That is really cool! I've never owned one like that, but I can see how they would be very useful for quick component identification!... I also see that you already have a very nice looking oscilloscope in the background on your workbench there towards the end, which is totally awesome!... You are WAAAAY ahead of where I was at your age, (and possibly even now?), because still to this day, I've never been able to afford to buy one of those. :( BTW, I would take nearly ALL of the components off of the circuit boards which you salvage, simply because you never know what you're gonna need for something in future projects, and some of those connectors and other such harder to find/less commonly available, or unique parts can be useful too! Of course what you keep and is most useful to you greatly depends on what kinds of designs and projects that you mainly work with and build, but I've found that unless you remove most everything from a circuit board, (except SMD components which are cheap to buy everywhere and hard to desolder anyway without damaging them), and then you throw that board away, you'll find that you'll end up needing something exactly like one of the components you left on a board which you tossed!... I salvage as much as I can because I find a use for it eventually! How old are you anyway? You look like about 14 or so years old... And you totally remind me of me when I was your age, because I was doing this exact same thing at that time also!... How did you learn so much about electronics already at your age? (I didn't know some of this stuff until I was at least in my 20's)... Enjoy electronics related stuff, as it can be very fun and interesting, as I'm sure you already know! One thing to be aware of though... Don't become an "electronics hoarder" as I became in my mid 40's now, with hundreds or even thousands of different types of electronic parts and components all around you, all sorted by type, etc., because it will definitely put a damper on your social life and your ability to live on your own later in life, always having so much "stuff" in your possession!... Try to find a "balance" between your more "nerdy" tendencies, (trust me, I know; been there done that, lol!), and the rest of the world, that way you don't end up a social "hermit" who is only always working on "projects" in his workshop, when everyone else is out having other kinds of (interacting with others) fun!... I'm NOT implying that you should just go out and regularly get "drunk and stupid" with all of your "less intellectually inclined" friends, (because they simply may not have anything good or productive to occupy their minds like you do with electronics), but don't just do that because it will detract from your smart mind... Having a very high intelligence is a great thing, just try to find a balance... I think it's a good thing though that you have started a TH-cam channel about your hobbies, because it will help you to keep a "reality check" on your passions/obsessions/tendencies... I certainly wish I had this platform to post all of my many "mad scientist" type ideas onto when I was younger, as the worldwide feedback from others will keep you more grounded and not so "in your own little world", as I was, LOL!... Just some fair advice from someone just like you, only older and (now) wiser... I always still am learning something new everyday though, so you should too... just don't end up finding yourself within the next 10-20 years or so, dedicating ALL of your time to electronic stuff, because there's much, MUCH else to enjoy about life also! Best of luck with all of your endeavors... I might even subscribe just to see what you come up with or build in the near future... Maybe I can even help you occasionally with certain electronic projects and/or concepts, etc., if you ever have any questions and would appreciate some real world advice from someone that's already done it before... Cool video dude! Keep exploring and learning!...
Very helpful advise. The component tester used can be purchased on Amazon for about $15 and $10 from Ebay (China). Search for "Transistor Tester" There are about dozen variations based on DUT pin sockets, display types and rather it comes with plastic case or not. Most operate off 9V, but I like the ones with 3.7V 14500 Li-ion with micro USB port for charging. These things draw 2~3 mA even when off.
Great video kid. I too salvage 'junked' boards and have a plethora of components. Instead of trashing the remaining boards , im hanging them on the walls of my shop as kind of a 3D wallpaper. Keep up the good work and educating so many others! 🤘👍
Back in the days where 3d printers does not existed, I used the cleaned PCBs to make custom cases for my hobby things that I built. Aside looking cool, they had a lot of air flow from the THD holes. It was free and I did not have to by sheets of woof to make the cases at the sizes I needed.
Keep up the good work Tanner. Reminds me of of when I was doing the same thing back in the late 60"s and 70"s. Lots of fun. Mom was always calling down to the basement to remind me to go to bed. Couldn't keep me away from it.
Cool ideas... I came here from a link from an Aussie video talking about the decline of hobby electronics, and it's channels like yours that help keep it alive. I went though your videos & you've got yourself a new subscriber btw... I can also see that it hasn't been easy for you to get a good amount of subscribers, but keep on doing what you're doing & making videos . This will eventually pay off & put you up there with the other big youtubers. Take care, and I look forward to your next project!
great vid, i didnt know a desoldering iron was a thing! i love soldering but theres only so much to be done, but salvaging components can be done whenever! ill find some busted boards i have and get to work
I would add safety as well to avoid getting shocked it's a good idea to have an idea of any dangerous components... then also after extracting you might want to check if they are up to spec otherwise you'll put them into projects and later be hunting down issues and debugging for a long time...
That old circuit board from the floppy drive @ 1:57 is from a Commodore 1541 disk drive. I remember it very well even though it's been more than 20 yrs since I've had it in my hand. I used to take my drive apart many times before I even learnt a lot about electronics. I am very surprised to see it in your pile! lol
Wow... I'm so new to all this... I've been looking for someone with your credentials ... I learned everything that came out of your mouth... Well played Tanner 👍 I scanned through your page 👍 You Rock!!! New Subscriber 💯
Instead of using proper de-soldering tools, I just heat up the pin and slam it on the ground to get the solder off. I find it works better than de-soldering tools. I have also found it odd that I have never needed to use butane to remove heatsinks, even large ones, even thought my soldering iron is 30W.
"Thank GOD", and thank you very much for your support and time 😉 If possible 🤔 I'd like to order the component tester you used in this video 😁 Let me know, I look forward to hearing from you 😎🙏🏾😎
How much bending can a PCB withstand before the traces on it crack and break? I'm looking at buying a high end video card that has been obviously bent, from the bent radiator fins, but not too much.
Geeat video, thank you so much for sharing with us. I wanted to ask you about the item you use for checking the transistors and mosfet, how is called amd where can I buy it.???
I do this too, for Raspberry Pi projects. Saves so much money! You should probably add a disclaimer by annotation that *dismantling cathode ray tubes (old heavy monitors and TVs) is **_extremely_** risky, and even when not plugged in for several years, can still carry a **_lethal_** charge of electricity, and people have died touching the wrong parts!* Look it up, be careful, or just don't do it... 📺⚡️⚰️
Harbor freight has a 120/or 150/soldering gun ,it looks like the seller so when you need more heat,it cost me fifteen dollars includes a case ,extra tips etc. Good invest ment
I do the same thing. I just started into electronics in the past few months. I've always had a general understanding of them but just started building/salvaging. I have a question about a component. What would be a few appliances/electronics that I could find some diacs in? I know CFL light bulbs, but other than that I'm having a hard time finding them (I have a couple of projects that I need a few for).
Honestly, TV's and such are pretty good for that. Most mosfets in there can handle up to 80 volts or so, but work just fine on 4 or 5 volts. Computer power supplies tend to have quite a few as well.
Thats really cool that you repurpose old electronics. I really wish i knew what all these components did better so that i csn create stuff from recovered electronics. They always say we got to the moon on the electronicsl capability of a watch(this was before smart watches)
Hey Tanner, Greetings from Wales in the UK. Really enjoyed your video, I imagine that would be similar to a practical test from an electronics tutor, where they give you a pile of electronic bits, and you've got to name them, and explain what they're used for, even I could understand your descriptions!!. First one of your vids that I've watched, it won't be the last, I'm just off to find some more. Regards, Wayne.
"Thank You", thank you very much. Your presentation was REALLY Really really good. I like to get the device you used to check your MOSFETS, transistors and voltage regulator. PLEASE send me a link 😎
Okay, i know that i'm late and that you probably found it, but search up "LCR-T4 Transistor ESR tester capacitance inductance meter" I'd post a link but TH-cam is bugging me for posting links.
Hey buddy I'm new to this...actually quit my job to become a electronic assembler...I have always loved this and I'm diving head first into this..I'm 37 with 3 kids...just so you get idea I'm a old guy lol...but where can you buy or what is that called the device that tells you the components when u plug them into it..??? Also the flyback on the old tv could that be used for a tesla coil flyback? I want to make a good strong arc coilm..I've made a few from kits and they are ok but I wans make one from spare parts by myself and make it bigger and string arcs...going for 12" arc....maybe about a foot n half tall coil. Could you help with those 2 quesrions.. thank you for your videos...subscribed ... you can email me or respond on here or however if possible...thank you
You are heading into an awesome new hobby! Good luck! The flyback from the TV could be used for a tesla coil flyback. Let me know if you have any more questions or if you get your coil working! This is the component tester I use: amzn.to/2Doz9eC
Tanner could you do videos focused on reusing flybacks and coils/inductors? I dont get how to reuse coils since they never have any markings. Love the channel, wish I was at your skill level at your age!
I have a few videos showing how to build high voltage power supplies with flybacks, and my new fidget spinner accelerator uses inductors to spin a spinner.
Old TV's , Radio's .. in the old days.. people just put them outside on the streets.. for the disposal service to get and process - now this is illigal for environmental and health reasons - and good so, too - for some Old TV (in those days) had alot of glass inside.. like the tubes mostly. And wierd toxins from those tubes. But we had alot of fun finding those TVsets and pluck from it what ever seemed usefull - the modern TV sets don't have as much.. but they are still interesting for their panel drivers.. o lets FLYBACK in memories.
Some you can break the board apart to get the components, others, heat gun, others, soldering iron. I've done it all, to harvest everything, use everything, copper, and even the gold.
I also keep circuit boards from discarded devices. Even if most of the simple components can be bought cheaply online, the pure satisfaction from building something useful from old components is almost addictive, hehe. I know you might not reply to a comment on your older videos, I just like to ask, should hobbists be concerned with lead exposure from desoldering/soldering on old boards? -someone in southeast asia
The fumes from solder are mainly from flux and contain little lead, even for leaded solder. You could only get significant lead exposure by ingesting it. So, don't breathe the fumes (because of the flux) and wash your hands (because of the lead)
I’m 22 and I’m honestly just now learning and applying myself to electronics and I’m in tears, I wish I was like you growing up! Youre so inspiring dude! Keep killing it!
I am starting at 34 yo :-) I have been working as programmer for a 8 year now and I got tired of the fact that when I turn off my computer, there is nothing. Electronics are tangible :-)
@@GreyDeathVaccine I resonate with that so much! things on the software side is cool but physically building things and piecing things together has such a different satisfaction to it!
Yeah I wish I was like this kid too! What a badass :D
This is what im going to college for and its fascinating to me. I love it and its honestly a pain to wrap ypur head around sometimes
Free stuff is the best. Its amazing how much you can get and also what people think is junk.
good for you, young man. May i kindly suggest, that you obtain and install a 4 inch fan, (ALOT QUIETER) from your parts, and attach it to a dryer vent hose, and have a stove range hood over your de-soldering area. Vent that exhaust outside, if you can. I've been doing this along time, and that poison WILL HARM YOU....keep on going...
I'm 38 and only now getting into hobby electronics, this video is a lifesaver and very informative, thank you! I had an old lcd tv that the screen broke and the lcd ruined, so i just today took it apart and saved the boards and useful parts, now i'm going to begin unsoldering!
Aside salvaging the components, you can also repurpose whole boards as they are; for example, I used a microwave oven control board to command a UV lamp for erasing EEPROMs or for making PCBs. As is essentially a timer, I choose one with display (VFD) that also display the remaining time. Other repurposed thing was a garage door controller with its own remote control to switch on or off the outside lights. The limit is your imagination.
Sooo encouraging. Good on you. I'm almost 56 yo and have lived offgrid for my whole adult life. In that time, I've watched seven very expensive inverters and other components of my solar system become junk when capacitors blew from old age or when they were struck by lightning surges. I get a lot of those here. I'm really over having to replace fixable gadgets I've paid a fortune for with new ones that arent so fixable because technology has changed and that excuse that "it's too expensive to fix and it's cheaper to by a new one" gives me no choice BUT to buy a new one. I fixed a junked spotlight torch the other day just by resoldering two wires. It had been dumped in the local skip. That was a simple fix I could do myself. An inverter is a safety issue, so I've enlisted a local electronics genius (like you) to teach me the basics and help me fix the latest casualty, the latest inverter that died from old age. It just needs some new capacitors to breath new life into it. And where will i get those capacitors? From broken gadgets. Great video. Good to see a young strapper innovating with old stuff in a world where old stuff isnt useful any more.
Nice dude. What's a local skip?
I like that you went through each step (including desoldering with different tools), component sorting & testing. Nice work.
this guy has workshop that everyone is dreaming of
I like to geat my electronic components by salvaging from circuit boards and it always make me imagine i'm in a post apocalyptic world of mad max lol ..
In the book Riddley Walker, they do this. Sort through junk after a nuclear war, much of which they have no idea how it works.
You are going places kid, smart, young and resourceful.
The next Steve Jobs right there!
my skype：Juven-3e our company doing elec components include IC transistor diode relay switch RES and Capacitors brand new original quality price much better than Mouser Digi-Key alibaba aliexpress ebay amazon，contact me bro no credit no business thank you
More of a Steve Wozniak
This is a great video! Reuse is the most effective form of recycling.
In the late 60s and early 70s, I lived out in the boondocks of Northern California. (Red Bluff is a good place to be from. As far from as possible! But, I digress.) The Tehama county dump (land fill in modern speak) was one mile away overland. I'd grab the big Radio Flyer wagon, and some ropes, and off I'd go, over hill and dale. Hours later in the 110+ degree (F) heat, I'd return home with a console color TV, standing up on end, strapped to the wagon! And they claim nerds don't get any exercise. Wrong! I built most of the SW radio receivers in the 1954 ARRL ham radio hand book, with the parts I scrounged from old TVs, tape decks, radios and mystery items. The first 4 track cartridge tape player I found baffled me for a couple of years until I saw my first 8 track unit! I was only 10 years old in 1967! I used a propane torch to heat the PCBs to get the parts out.
You remind me of myself when I was 15 and salvaging old electronics from broken neighbours devices and use it to build led flasers and radio transmitters. Now I am studying electrical engineering.
With a degree in electrical engineering, you can be like Mehdi of ElectroBoom!
@@vickielawson3114lol that guy scares me 😅
That is the way I started back in the 70's , I would salvage parts for Henpol TV Repair. They taught me parts and then how to use them. It is a great way to learn the skills needed. Ham Radio operators are doing this as well. This is wonderful to see, made my day
my mother hates that im a hoarder of electronic boards
My did gives me weird looks when I ask to disassemble anything xD
They don't complain anymore when you get their (formerly $1000) obsolete, no-longer-available-for-sale hot tub circuit board up and running again for free. All their friends had to make their hot tubs into giant planters, theirs is humming along with fresh relays and electrolytic capacitors.
Same here
I love to hoard DC motors
Caps, z44 ND other mofsets and transistors..... Anything highvoltage
Me too :D
I'm liking your transistor tester/identifier. Is that one of your build videos? (not finding it)
its called a transistor tester and you can get them cheap on eBay
Looks like EEVblog has done a video on it. th-cam.com/video/7Br3L1B80ow/w-d-xo.html
@@WildfoxFabrication Thanks for the name.
That is a 4 dollarAliexpress component tester....
I suggest taking all the ceramic capacitors (the blue flat ones) since they are useful for high voltage projects such as voltage multipliers and high voltage capacitor banks
I do the same thing... And I ain't no kid. Good job well done mate! Just one thing, I find that it is worth desoldering the little resistors, not because they are expensive but it means that there is more chance of you having the right resistor when you need it. It means you have a wide selection when you start making your electronic gadgets in the future.
Just a thought. Peace from Scotland 🤓👍🏴
Good advice testing and a organisation system is required. Don't store duds. Turn into a horder of broken tech.
Thanks for the taking the time to make this video, it has sure helped me to save money and get some free components! Cheers from Tasmania Australia
Good video. For as much desoldering as you do, you might want to just eventually get a desoldering gun. It makes things so much easier and faster.
Nice video. Great to see young people enjoying electronics. I've been salvaging components since I was about 8 years old. It was much easier back then as few components were proprietary. Today, so many components are difficult to reuse or just too small to deal with. Markings can be custom to a manufacture and no datasheets available. But it also depends on what you want to make. Most any transistor can be used for simple switching regardless of its value.
Oh, and defiantly hang on to those Flyback's. You can have a shockingly good time with them. 😎
Keep on salvaging...
I personally use a hot air gun to remove components. It burns the board but it can get a flyback out in one minute.
Nice! I'll have to try that.
the hot air gun is also very useful as it allows me to remove ics and smds without damage at lower temps.
Novanoid well hot damn
Thank you. I’m new to hobby electronics so this was very useful. One question though: wouldn’t static electricity be a risk factor when you place your circuit boards on a carpet like that?
It can be. I thought the same thing. I guess it depends on which components you want to salvage.
Thanks for sharing. Please, make sure you have good ventilation, or better yet, work outside with a fan blowing away those toxic fumes.
Maybe it's just me but I do not often salvage electrolytic caps from old PCBs especially high hour boards like those from old CRT and flat screen TV sets and monitors. Especially where heat is a factor involved..
Desoldering parts you can also use one of those cigarette lighter jet torches and heat the backside of the pcb up and occasionally tap the board on the ground or bench to knock parts off.. it's alot faster.
When dealing with appliances like say a coffee maker. You can use the PCB intact but instead of turning on a heating element you can have a timer based system to turn on lights that run from the AC mains. I recycled a Kurig coffee maker into a dusk till dawn timer that operated a high current HVAC contactor to turn on bug sodium lamps on my property.. Same principle holds true for RF based remote controlled systems like a garage door opener.or a car alarm with remote key entry. I typically do not scavenge those PCBs right off for bare parts if I have a transmitter receiver paired device that still works because I know I can re-engineer them into another system.
Also the appliances hold other goodies other than just PCBs. They may have meters, LEDs, sensors, switches, terminals, etc that are not on the actual PCB itself.
Before salvaging parts you need to identify why the appliance the PCB came out of was file 13ed in the first place.. Find the bad part(s) so you know not to save them..
Those windowed IC's may or may not be useless depending on what they are. If they are UVPROMs then whatever programming they had on them is gone now since the windows are exposed.. EPROM and E2PROMS are more useful ONLY if you have the proper instructions and programmers / Burners for them. I have a pile of similar EPROMS that came out of old Motorola Syntor mobile 2-way radios but they are 100% useless in todays world since the programmer required an XT based PC
Thanks bud. Just started bout a year ago getting into electronics like this. And I have built some amazing stuff since then. Keep it up kid. Wish I got started as young as you did. Now for builds. Get into power walls and solar, wind, water for power. N teach me more. Thanks bud.
9:00 Even after a long time since the board saw power, you will want to use a resistor to discharge each capacitor before handling it (and especially before handling the pins or through-hole). Use insulated pliers or something else electrically isolated to contact the resistor to the capacitor. How long you hold depends on the values on the cap and the value of the resistor.
It's not safe to just short it out - that can actually be pretty dangerous!
Nice video dude. How did you make that component tester? That looks like a really educational project.
You can em' for like 10 bucks, and boy are they useful
Good video pal! You forgot to mention that opening devices and salvage components, you can always learn something new and can give you ideas for diy projects. For example a clever construction or try to get better at soldering or try something new with a new component found you didn't know it exists. Good practice to search the partnumber to see what it is exactly.
It is also a kind of training to easily recognize components just by looking at it or configuration or just by part number. Very good practice. I collect also buttons, panels, plastic parts, gears and cabinets and can be very useful even when you have already a 3D printer. Some design stuff cannot easily made with a 3D printer or you don't need it anyway because the part is already useful. So yeah, that can be also a part of the job. ;-)
One warning before take apart devices that can hold a high voltage charge, be sure there is no charge left inside capacitors. Very important to mention here because you talk about CRT televisions and power supplies. Be careful. Also be careful with the fumes that releases when desoldering parts. Many PCBs have old flux residue or other unknow chemicals on it. Burning the PCB is not a good idea.
Overall, good video and hopefully this video will stimulate people to do the same to learn, to practice and to reduce the pile of e-waste a little. Thumbs up! 🙃🙂👍
You can save a a fair amount of time desoldering scrap parts using a cheap heat gun and an air compressor. I'm sure you get the idea. Heat the solder and blow it off. I would recommend a sheet metal kinda backsplash to cut down on solder mess. DRESS APPROPRIATELY!
Inspiration, I wish I had started young as you. Good work. This is the way to learn.
I also really love desoldering components from circuit boards. You can sometimes get components that you can't easily buy or components that are expensive. I recently found an old stereo receiver dumped on the side of the road and there are lots of useful components inside.
Great videos Tanner. Quick question regarding safety in dismantling circuit boards. Many of these boards use large capacitors that could deliver a very bad shock. I know capacitors can hold a charge even when unplugged. So, how do you ensure the capacitor is safe to touch? How do you get rid of this voltage and when do you do this? Thanks and great videos!
Well, all of my circuit boards have been sitting in that box for a long time. So any residual charge would have been dissipated due to parasitic resistance. In other cases where the board that is being dismantled is newer, the capacitors could still have a charge. To solve this issue, just touch a screwdriver to the two terminals of the big electrolytic capacitors on the board.
It would probably be better to use a resistor to discharge large capacitors so you don't damage the component or the screwdriver. ;)
Could even get some solid core wire take one of those larger white ceramic resistors and craft a little discharging tool.
Using a screwdriver on a larger charged capacitor could arc and that could take little chunks off the screwdriver and with the resistor you can convert that charge into a little heat over 15 seconds or so depending on cap/resistor value nice and easy instead of poking at them like a volatile explosive.
NoSuspect; Very good advice for him! I was about to suggest the same thing.
If you want to discharge capacitors from a freshly used circuit board I take a screw driver and scrape it against the backside because all you need to do to discharge the capacitor is short the leads. As long as you are insulated from the metal you will not get shocked. However you should be more aware of potentially shocking yourself with acatgode Ray tubes. As Tanner said in the beginning regarding the first circuit board he discussed, the flyback Transformer can get to 35,000 volts and the inside of the CRT can remain charged just like a capacitor and the CRT is pressurized and will shatter in an explosive manner if not handled properly (however I have never ever heard of anyone getting hurt that way and I have taken apart many old CRTs).
Hahaha... I got even with my big brother with a condensor, one of the old points n condensor style. He would always come and take things I was work with. Charged it up, you could touch the can or the connection but not both. I noticed when he picked it up, and it still played along... He dropped it in his pocket... the wait was hell, but then I heard the pop and saw the look on his face. He took it out of his pocket and placed it carefully back on my table... He said "you got me" very quietly and walked away.
Now before you say I could have hurt him, you need to know he was a lot bigger, older, stronger and significantly meaner. I had to learn, devise a way to make us equal. He learned while he could always push me around.... I would get him back, eventually! 😉
@7:47 & 12:15; "TO-220 package" is what I think you meant to say there, lol!... That is what style package those larger transistors and MOSFETs are, NOT "TO-22", as you were saying.
Also, @12:50; the TL780 series from Texas Instruments are indeed voltage regulators, but that number is only the first part of the full complete part number, and if ONLY given that number you cannot definitively tell what voltage the regulator puts out... you have to ALSO look at the -05, -12, etc. part after that *series* number in order to tell the voltage output. (-05 is 5V, -12 is 12V, etc.)
Where did you get that component tester that you use towards the end of this video? That is really cool! I've never owned one like that, but I can see how they would be very useful for quick component identification!... I also see that you already have a very nice looking oscilloscope in the background on your workbench there towards the end, which is totally awesome!... You are WAAAAY ahead of where I was at your age, (and possibly even now?), because still to this day, I've never been able to afford to buy one of those. :(
BTW, I would take nearly ALL of the components off of the circuit boards which you salvage, simply because you never know what you're gonna need for something in future projects, and some of those connectors and other such harder to find/less commonly available, or unique parts can be useful too! Of course what you keep and is most useful to you greatly depends on what kinds of designs and projects that you mainly work with and build, but I've found that unless you remove most everything from a circuit board, (except SMD components which are cheap to buy everywhere and hard to desolder anyway without damaging them), and then you throw that board away, you'll find that you'll end up needing something exactly like one of the components you left on a board which you tossed!... I salvage as much as I can because I find a use for it eventually!
How old are you anyway? You look like about 14 or so years old... And you totally remind me of me when I was your age, because I was doing this exact same thing at that time also!...
How did you learn so much about electronics already at your age? (I didn't know some of this stuff until I was at least in my 20's)...
Enjoy electronics related stuff, as it can be very fun and interesting, as I'm sure you already know!
One thing to be aware of though... Don't become an "electronics hoarder" as I became in my mid 40's now, with hundreds or even thousands of different types of electronic parts and components all around you, all sorted by type, etc., because it will definitely put a damper on your social life and your ability to live on your own later in life, always having so much "stuff" in your possession!... Try to find a "balance" between your more "nerdy" tendencies, (trust me, I know; been there done that, lol!), and the rest of the world, that way you don't end up a social "hermit" who is only always working on "projects" in his workshop, when everyone else is out having other kinds of (interacting with others) fun!... I'm NOT implying that you should just go out and regularly get "drunk and stupid" with all of your "less intellectually inclined" friends, (because they simply may not have anything good or productive to occupy their minds like you do with electronics), but don't just do that because it will detract from your smart mind... Having a very high intelligence is a great thing, just try to find a balance...
I think it's a good thing though that you have started a TH-cam channel about your hobbies, because it will help you to keep a "reality check" on your passions/obsessions/tendencies... I certainly wish I had this platform to post all of my many "mad scientist" type ideas onto when I was younger, as the worldwide feedback from others will keep you more grounded and not so "in your own little world", as I was, LOL!...
Just some fair advice from someone just like you, only older and (now) wiser... I always still am learning something new everyday though, so you should too... just don't end up finding yourself within the next 10-20 years or so, dedicating ALL of your time to electronic stuff, because there's much, MUCH else to enjoy about life also! Best of luck with all of your endeavors... I might even subscribe just to see what you come up with or build in the near future... Maybe I can even help you occasionally with certain electronic projects and/or concepts, etc., if you ever have any questions and would appreciate some real world advice from someone that's already done it before... Cool video dude! Keep exploring and learning!...
This was a handful to read :D
Very helpful advise.
The component tester used can be purchased on Amazon for about $15 and $10 from Ebay (China). Search for "Transistor Tester" There are about dozen variations based on DUT pin sockets, display types and rather it comes with plastic case or not. Most operate off 9V, but I like the ones with 3.7V 14500 Li-ion with micro USB port for charging. These things draw 2~3 mA even when off.
What a coincidence! I had to desolder that EXACT same circuit board that I pulled out of my UPS!
Very good work Tanner. I am using a Welder soldering gun that goes from 100W to 140 W on big projects.
Great video kid. I too salvage 'junked' boards and have a plethora of components. Instead of trashing the remaining boards , im hanging them on the walls of my shop as kind of a 3D wallpaper. Keep up the good work and educating so many others! 🤘👍
Back in the days where 3d printers does not existed, I used the cleaned PCBs to make custom cases for my hobby things that I built. Aside looking cool, they had a lot of air flow from the THD holes. It was free and I did not have to by sheets of woof to make the cases at the sizes I needed.
@@sebastian19745
so were YOU the one who made the motherboard PC case
Keep up the good work Tanner. Reminds me of of when I was doing the same thing back in the late 60"s and 70"s. Lots of fun. Mom was always calling down to the basement to remind me to go to bed. Couldn't keep me away from it.
Cool ideas... I came here from a link from an Aussie video talking about the decline of hobby electronics, and it's channels like yours that help keep it alive. I went though your videos & you've got yourself a new subscriber btw... I can also see that it hasn't been easy for you to get a good amount of subscribers, but keep on doing what you're doing & making videos . This will eventually pay off & put you up there with the other big youtubers. Take care, and I look forward to your next project!
Nice electronics bench, tools, and organization. Nice explanation of things.
great vid, i didnt know a desoldering iron was a thing! i love soldering but theres only so much to be done, but salvaging components can be done whenever! ill find some busted boards i have and get to work
I would add safety as well to avoid getting shocked it's a good idea to have an idea of any dangerous components... then also after extracting you might want to check if they are up to spec otherwise you'll put them into projects and later be hunting down issues and debugging for a long time...
What. in. the. heck. was that AMAZING tool you used in the intro!?
A desoldering gun I got from radioshack when it was going bankrupt. It is such a useful tool!
THIS VIDEO IS AWESOME!
You are an amazing teacher and you explain things quite well. I've subscribed and I wish you luck with your endeavors.
That old circuit board from the floppy drive @ 1:57 is from a Commodore 1541 disk drive. I remember it very well even though it's been more than 20 yrs since I've had it in my hand. I used to take my drive apart many times before I even learnt a lot about electronics. I am very surprised to see it in your pile! lol
Wow... I'm so new to all this... I've been looking for someone with your credentials ... I learned everything that came out of your mouth... Well played Tanner 👍 I scanned through your page 👍 You Rock!!! New Subscriber 💯
Greetings from Puerto Rico 🇵🇷 you have here a new subscriber.
Instead of using proper de-soldering tools, I just heat up the pin and slam it on the ground to get the solder off. I find it works better than de-soldering tools. I have also found it odd that I have never needed to use butane to remove heatsinks, even large ones, even thought my soldering iron is 30W.
😂
You are awesome.
Shall I ask wheter you know where we can find diac and triac ?
"Thank GOD", and thank you very much for your support and time 😉 If possible 🤔 I'd like to order the component tester you used in this video 😁 Let me know, I look forward to hearing from you 😎🙏🏾😎
your component tester and identifier is very attractive and useful and interesting for me
How much bending can a PCB withstand before the traces on it crack and break?
I'm looking at buying a high end video card that has been obviously bent, from the bent radiator fins, but not too much.
Geeat video, thank you so much for sharing with us. I wanted to ask you about the item you use for checking the transistors and mosfet, how is called amd where can I buy it.???
I do this too, for Raspberry Pi projects. Saves so much money! You should probably add a disclaimer by annotation that *dismantling cathode ray tubes (old heavy monitors and TVs) is **_extremely_** risky, and even when not plugged in for several years, can still carry a **_lethal_** charge of electricity, and people have died touching the wrong parts!* Look it up, be careful, or just don't do it... 📺⚡️⚰️
Very good theme song! I'm impressed.
Harbor freight has a 120/or 150/soldering gun ,it looks like the seller so when you need more heat,it cost me fifteen dollars includes a case ,extra tips etc. Good invest ment
Great video I am getting into electronics myself and this helped!
good to see re use of electronics. The rectangle part that was with the mov are polyswitches they are resetable fuses.
Hello :)
where can I buy or build the device shown at 11:50 ?
Sorry they are easily found everywhere, under the name "component tester" or "transistor tester"
I do the same thing. I just started into electronics in the past few months. I've always had a general understanding of them but just started building/salvaging. I have a question about a component. What would be a few appliances/electronics that I could find some diacs in? I know CFL light bulbs, but other than that I'm having a hard time finding them (I have a couple of projects that I need a few for).
Did you make the component tester that told you what the part is? Or where do I get one?
amzn.to/3lQTutz This is where you can buy it, it is pretty cheap and already comes in a case. I just 3D printed a case for mine.
super cool that you know this much about circuits, I can learn a lot form these videos!
mark k I'm happy to see the future of technology developing like this
What's a good electronic to loo out for for salvaging low volt mosfets? 4-5v in paticular. Thannks!
Honestly, TV's and such are pretty good for that. Most mosfets in there can handle up to 80 volts or so, but work just fine on 4 or 5 volts. Computer power supplies tend to have quite a few as well.
@@TannerTech thanks bro. I have two broken flat screens in my backyard.
Thats really cool that you repurpose old electronics. I really wish i knew what all these components did better so that i csn create stuff from recovered electronics. They always say we got to the moon on the electronicsl capability of a watch(this was before smart watches)
Absolute class, very educational and to the point. Thank you
Hey Tanner, Greetings from Wales in the UK. Really enjoyed your video, I imagine that would be similar to a practical test from an electronics tutor, where they give you a pile of electronic bits, and you've got to name them, and explain what they're used for, even I could understand your descriptions!!. First one of your vids that I've watched, it won't be the last, I'm just off to find some more. Regards, Wayne.
hay part what you use equipment for desoldering transistors?
"Thank You", thank you very much. Your presentation was REALLY Really really good. I like to get the device you used to check your MOSFETS, transistors and voltage regulator. PLEASE send me a link 😎
Okay, i know that i'm late and that you probably found it, but search up "LCR-T4 Transistor ESR tester capacitance inductance meter"
I'd post a link but TH-cam is bugging me for posting links.
Where do you find your circuit boards/ewaste?
Great Video. awesome bench setup with great ideas. Please continue to make more videos
Awesome antistatic precautions. Bravo.
Impressive video. I enjoyed watching it from start to end.
glad you enjoyed it!
hi. what is the name of the device u used to check those mosfets,transistors..........etc.Thanks
Very usefull. What's the name of the device at 11:40 and how did u get it?
That is a transistor tester. You can find them for about 15 dollars on eBay or other electronic seller.
Okay, thanks! and keep it up :)
Tanner Tech 9
For your desoldering, have you tried using an iron for ironing cloth?
were did you get your transistor checker from please I want to get one
Bamboo stick can be used as a brush for desoldering
your young and smart , use it and dont lose it =) nice work man
i also do the same scraping from old circuit boards before sending them for recycle love from India
That was a very fine video. Impressive, the way that you have your organization. Do you try to repair other peoples electronics?
EXCELLENT VIDEO! You were so thorough. I put this in my favorites.
got one of those electronic parts tester. best buy ever.
Where did you get it? I'd love to have that little device. It's like a pokedex for circuitry
Hey buddy I'm new to this...actually quit my job to become a electronic assembler...I have always loved this and I'm diving head first into this..I'm 37 with 3 kids...just so you get idea I'm a old guy lol...but where can you buy or what is that called the device that tells you the components when u plug them into it..??? Also the flyback on the old tv could that be used for a tesla coil flyback? I want to make a good strong arc coilm..I've made a few from kits and they are ok but I wans make one from spare parts by myself and make it bigger and string arcs...going for 12" arc....maybe about a foot n half tall coil. Could you help with those 2 quesrions.. thank you for your videos...subscribed ... you can email me or respond on here or however if possible...thank you
You are heading into an awesome new hobby! Good luck! The flyback from the TV could be used for a tesla coil flyback. Let me know if you have any more questions or if you get your coil working!
This is the component tester I use:
amzn.to/2Doz9eC
Hey. Where can i get that device which can test any component
Tanner could you do videos focused on reusing flybacks and coils/inductors? I dont get how to reuse coils since they never have any markings. Love the channel, wish I was at your skill level at your age!
I have a few videos showing how to build high voltage power supplies with flybacks, and my new fidget spinner accelerator uses inductors to spin a spinner.
Maybe you should see if there is some health risk with some substances, for exaple beryllium present in microwaves apparently is bad.
This is awesome! Thanks for teaching at such a good level!
Great video, thanks very much. You also need ventilation. Don't breathe the fumes.
I do the same thing as yourself, but have no knowledge of identifying voltage regulators from circuit boards. Can you explain?
Tanner Tech will you make a synthesizer?
That would be fun! I'll give it a try soon.
Tanner Tech electronicpeasant.com Or try some diy forums
I get mine from allegro. One op-amp for 26 cents. However the shipping prices might be high for non European people.
Hey mate should i buy parts from aliexpress or amazon?
Old TV's , Radio's .. in the old days.. people just put them outside on the streets.. for the disposal service to get and process - now this is illigal for environmental and health reasons - and good so, too - for some Old TV (in those days) had alot of glass inside.. like the tubes mostly. And wierd toxins from those tubes. But we had alot of fun finding those TVsets and pluck from it what ever seemed usefull - the modern TV sets don't have as much.. but they are still interesting for their panel drivers.. o lets FLYBACK in memories.
Where is the circuit board that u salvaged parts from?
Indeed! Keep those vids coming!
i love your device .... can we buy it in a market?
The component tester?
the component tester can be bought like anywhere
Well put together video. You are a great explainer and smart fellow. Thanks for your work!
Some you can break the board apart to get the components, others, heat gun, others, soldering iron. I've done it all, to harvest everything, use everything, copper, and even the gold.
I also keep circuit boards from discarded devices. Even if most of the simple components can be bought cheaply online, the pure satisfaction from building something useful from old components is almost addictive, hehe.
I know you might not reply to a comment on your older videos, I just like to ask, should hobbists be concerned with lead exposure from desoldering/soldering on old boards?
-someone in southeast asia
The fumes from solder are mainly from flux and contain little lead, even for leaded solder. You could only get significant lead exposure by ingesting it. So, don't breathe the fumes (because of the flux) and wash your hands (because of the lead)
Excellent video, I'm kind of late to the party but really enjoyed it :)
Cool stuff mate. Keep going