At last, someone has explained it in easy to understand ways, thank you for your help. Spooky that you altered the Camera cfg back to 43., and to see what stand you are on 😉
Thank you, this is brilliant. I have tried other tutorials, but they don't mention the keybinds for saving views so I couldn't get it working. Thank you so much for this. Edit- In actual fact, when I reset the camera back in the config file by adding 40, it has moved all my custom views forward so they don't work!
@@BritishAvgeek worked perfect thanks I had the game running before editing the file hence why it opened in the cockpit 🤦🏻♂️ but once restarted all worked perfectly thanks again 🙌🏼🙌🏼
I could do though it would be very short! AutoBrake set to max - start the takeoff roll, then before you reach V1 idle the throttle and the brakes will auto-apply onto max (don't touch the brakes or AutoBrake switches off) 👍
I’m doing this on the FlyBy wire air bus and I have no problems defining the views as described, however, when I change the Camera file back and then get into MSFS the programmed views are off. The window view ends up just outside the fuselage. (It worked fine when I tested in the edit mode) Any ideas ??
Hi, just finished watching your Custom Views vid, which helped me no-end, you have a new subscriber BTW! Do you have any of your custom views bound to an alternative controller? I currently have my views bound to the NUMPAD, but would prefer to bind them to a Razer Synapse, I had used with FSX and P3Dv4, I've read my articles on this subject, but nothing to address the issue? Hope you don't mind me asking. Jim
Fantastic! Welcome onboard - I'm glad I was able to help 😃 I don't have an alternative controller now, like you I have the keybinds set for the custom views as Alt + 1 to 9 on the top of my qwerty. Would be interested to hear if you have a good way of doing it - I'm not particularly techy when it comes to working deep tech stuff out 😂
@@BritishAvgeek Lol! will do, I managed it a ouple of months ago, but now forgotten!! Cheers and thanks again!, just sorted the simbrief integration too, thanks
Hi mate. When I add the 4 (40) back to the config file, my saved camera views end up being 40 further forward and out of the aircraft. Would you have any idea how to fix that?
That's unavoidable... More recently I'll set one view on each side (inside and outside just in case the walls of the aircraft lock the camera in) near the tail, then when I change the figures back to the original numbers I can then set all the rest of my custom views without too much issue
Wonderful. Very Clearly explained. I tried the exact steps but after reloading the sim the alt+num key behaved differently. It points somewhere else not on the saved points. Any ideas to resolve it ?
Question: How can | made a key binding to enter inside the plane after I made some new views inside. I follow this video of you. But I can't look inside after the new changes. You talk about a key binding. Thanks in advance
@@BritishAvgeek I didn't restart yesterday to try it out, just have now. I changed the 43 to 3, loaded the sim and set my cameras using the same keybinds as you, I then quit the sim and set that value back to 43, but when I load back in, my custom views are all offset due to adding the 40 back (i.e. they are all closer to the nose of the aircraft than where I set them) whereas yours remain fixed in place, any idea why that is?
@@thecommentator6694 yep sorry I should have explained that bit a little clearer in the video 😂 yeah you have to sometimes just reposition them after you set the value back because you're telling the camera settings to shift forwards again
Great question - nope, save all the views as the video shows and it'll stay saved 👍 I'm a QA tester for the FBW A320 so update it sometimes twice a day and it has saved and remembered it every time 👍
@@Mandalor_ian no problem! Hope you find it useful. Same applies to the other aircraft.... If you get in a 747 - you can set all the key binds the same way (-40 from the first value) and it'll save for that too
@@BritishAvgeek ok thanks but I’ve only just got my head around the a320 lol I’ll leave the big birds until I’ve learned everything else I’m just trying to figure out how to read sids & star charts which is a bit confusing as on a few flights I’ve done on the final approach the planes gone all round the world so I’m trying to learn how to correctly choose the right star etc
Not sure why but it bugged out when I restarted it. Not sure if it is sim update 5, but I tested it in the sim, then once I restarted it, they got scuffed up. I am wondering if it is because I forced closed the application. The cameras were in the wrong position after the restart.
@@jdzzl no - when you minus 40 to go into the cabin to begin setting views, when you're done with one either side you can reset it back to the original value like I show and then go and re-save the camera views again
did everything just the way you did it I saved it CTRL ALT 1 and then went backed added the 4 restarded the sim and i hit alt 1 and it wont go to that camera. like i dont think it saved any input
I have just tried this several times and it still comes up with the same view which is as if I am standing in the door way looking out . Has anything changed since you originally released this video in Jan 2021 Thanks
@@BritishAvgeek Thanks for telling me about your flightsim.to download but unfortunately it produced the same result. I was thinking that it might be the fact that I am using logitech yoke , switch panel and pedals which automatically set up the peripherals. Having said that thanks for all the good work you do and please keep writing your tutorials.
@@robiN-mb5oe yeah you're not doing what I'm suggesting I don't think. Set the value back to 43, then when you load the aircraft again all the views are out of place so just move the views back to where you originally set them and save them again fresh now the value has been reset back to 43... It does work because I do it on every aircraft in the sim I want custom views for
This didn't work for me. All was going well until I reset the config file back to 43, and it had shifted all of my saved custom views by the same amount, so they're all off by 40. What did I do wrong?
Didn't do anything wrong - just move the views back and resave. A quicker "hack" is to set one left and right view at -40 then put the figure back to default and save the rest
You need to set the keybinds as I showed before I spawned in on the video. Set the filter to all as I mentioned and find the camera list to set what is missing
@@BritishAvgeek thanks so much mate. Got it. When I reset the config file back my camera views that I set were all off. So reset them again so not sure why we needed to do the config in the first place, I may have done something wrong but fantastic video and thanks for taking the time to explain it. Your fantastic and your videos are a huge help to me and I'm sure thousands of others 🤩
@@gtujjteryjngg5970 the camera might just have decided to warp itself too far away again so look about and use the left right up down arrows to get back to the plane
a good habit to teach viewers is to disable the line to change after making a copy and work on the copy line after disabling the original with a semi-colon symbol. in this way to teach people how to disable a line / how to dicument a modification / how to roll back or trace changes. lots a punter around - he is no programmer, right ? so then you teach 'em the useful bits, right ?
Have you already set custom views? If not then you won't need to delete any. Failing that I'm not actually sure - you'd likely have to backup the old camera.cfg file and then put that back in place of the new one
@@BritishAvgeek yes sir it finally help the other you tubers videos were very hard your the good one and thats why I have subbed to you thank you! also sorry I cant attend your 1k sub video
At last, someone has explained it in easy to understand ways, thank you for your help. Spooky that you altered the Camera cfg back to 43., and to see what stand you are on 😉
🤣🤣🤣 VERY well noticed! That was the Easter egg in the video!!!! Only one who's noticed yet 👌
@@BritishAvgeek 😂😂👍
That was way easier than I thought it would be. Thanks for this!
This was very clear and straight to the point, thank you.
I love how there's an 11 minute video for something that can be explained in 1 minute
I look forward to your one minute video then 🫡
Thank you for this . You've got a new subscriber
Thank you! Hope it was helpful - welcome onboard!
Wonderful tutorial . Even a small kid will understand . Thanks a ton :)
Always a pleasure! Hope it helped 🙂
Finally a Quick and easy tutorial helped me a lot thank you!
You're welcome!
1:06 Is it the default a320 neo or the A32NX?
A32nx
Thanks really helpful, been looking to do this for a while
Had quite a few asking how and for me some other videos weren't working so I figured I'd do one to show exactly how I did it a week ago
same
Hey man! Worked like a charm, though I had to use the first camers.cfg file to fix this. Have a good one thanks for this tutorial!
Thank you, this is brilliant. I have tried other tutorials, but they don't mention the keybinds for saving views so I couldn't get it working. Thank you so much for this. Edit- In actual fact, when I reset the camera back in the config file by adding 40, it has moved all my custom views forward so they don't work!
How do I get to the Center of the aeroplane?
Follow the video step by step as I show you - edit the cameras.cfg file save it and it should allow you to go into the centre
@@BritishAvgeek worked perfect thanks I had the game running before editing the file hence why it opened in the cockpit 🤦🏻♂️ but once restarted all worked perfectly thanks again 🙌🏼🙌🏼
Hey can you do a video on how to do rejected takeoff?
I could do though it would be very short!
AutoBrake set to max - start the takeoff roll, then before you reach V1 idle the throttle and the brakes will auto-apply onto max (don't touch the brakes or AutoBrake switches off) 👍
Very good video but my custom views are not saving…. I have the same CTRL ALT 1 set up as you and it’s not saving…
If i create my custom views like you just showed in this video will I loose all of them and have to set them up again if I reinstall the sim?
but when I reset the view point back to normal and try the new cameras in game the camera viewpoints have moved forward 40
I’m doing this on the FlyBy wire air bus and I have no problems defining the views as described, however, when I change the Camera file back and then get into MSFS the programmed views are off. The window view ends up just outside the fuselage. (It worked fine when I tested in the edit mode)
Any ideas ??
Yep that's because you've set the figure back to the original value so just go and move the views back and save them a final time
Is this method applicable to all planes besides A32NX including Fenix and boings
Hi, just finished watching your Custom Views vid, which helped me no-end, you have a new subscriber BTW! Do you have any of your custom views bound to an alternative controller? I currently have my views bound to the NUMPAD, but would prefer to bind them to a Razer Synapse, I had used with FSX and P3Dv4, I've read my articles on this subject, but nothing to address the issue? Hope you don't mind me asking. Jim
Fantastic! Welcome onboard - I'm glad I was able to help 😃 I don't have an alternative controller now, like you I have the keybinds set for the custom views as Alt + 1 to 9 on the top of my qwerty. Would be interested to hear if you have a good way of doing it - I'm not particularly techy when it comes to working deep tech stuff out 😂
@@BritishAvgeek Lol! will do, I managed it a ouple of months ago, but now forgotten!! Cheers and thanks again!, just sorted the simbrief integration too, thanks
@@JamesSmith-km8xu awesome! :)
I owe you a beer!
Make it a Gin 😉🤣
I just finished setting up my custom views for my CRJ 700. Where is that file located, (so I can back it up.) Thanks.
Is there a way how to revert back to the original settings after setting up camera views ?
How did u do repaint?
Drew it up in Paint 3D and sent it to a livery creator to get it commissioned and made for the channel especially 👍
Somebody knows if this can be done also for the A320 Fenix version? Thanks
in the fenix you can just "walk" into the cabin and set the custom views without needing to change any file stuff
Thanks EVER so much for all your Videos and Tutorials, They have helped me tremendously. 🙂
You're most welcome 😁
Well, i cant open any files in the notepad, what should i do? i tried to download liveries on the salty 747-800, but i dont got the notepad files
You would definitely have the notepad files. If you have the files, and you have windows, you have notepad
@@BritishAvgeek Yes, i found out, i had to install a type of notepad on the microsoft store, but it worked. Thanks for fast reply
This works on pmdg 737?
Hi mate. When I add the 4 (40) back to the config file, my saved camera views end up being 40 further forward and out of the aircraft. Would you have any idea how to fix that?
That's unavoidable... More recently I'll set one view on each side (inside and outside just in case the walls of the aircraft lock the camera in) near the tail, then when I change the figures back to the original numbers I can then set all the rest of my custom views without too much issue
@@BritishAvgeek I'm not sure I understand that lol.
i just wish the camera would not travel when selecting the pre-set.
So if I want to change the view in the FlyBy Wire mod, then I access that file ?
Yes :)
Wonderful. Very Clearly explained.
I tried the exact steps but after reloading the sim the alt+num key behaved differently. It points somewhere else not on the saved points. Any ideas to resolve it ?
Just move them back and resave it the views and it's done :)
Question: How can | made a key binding to enter inside the plane after I made some new views inside. I follow this video of you. But I can't look inside after the new changes. You talk about a key binding. Thanks in advance
They're the keybindings in the control menu - keyboard options - custom view 1 to 9
I have the onestore folder but the community folder only has stuff i put in there nothign else am i missing something?
for the A32NX you want to go into the flybywire-a320-neo folder inside community
Does this work for the Fenix?
Fenix is even easier... Set the keybinds for save and load custom views then just walk back into the cabin and save them 👌
Finally got round to doing this, only took me a month!
😂 nice! Good to have a little personal touch in the flight deck!
@@BritishAvgeek I didn't restart yesterday to try it out, just have now. I changed the 43 to 3, loaded the sim and set my cameras using the same keybinds as you, I then quit the sim and set that value back to 43, but when I load back in, my custom views are all offset due to adding the 40 back (i.e. they are all closer to the nose of the aircraft than where I set them) whereas yours remain fixed in place, any idea why that is?
Ignore me, just realised I could just move back to the positions and set the custom views... cheers!
@@thecommentator6694 yep sorry I should have explained that bit a little clearer in the video 😂 yeah you have to sometimes just reposition them after you set the value back because you're telling the camera settings to shift forwards again
@@BritishAvgeek Yeah makes sense!
Does this have to be done every time FBW do a update or will it just stay as is once set up thanks in advance
Great question - nope, save all the views as the video shows and it'll stay saved 👍 I'm a QA tester for the FBW A320 so update it sometimes twice a day and it has saved and remembered it every time 👍
@@BritishAvgeek great thanks for the helpful advice
@@Mandalor_ian no problem! Hope you find it useful. Same applies to the other aircraft.... If you get in a 747 - you can set all the key binds the same way (-40 from the first value) and it'll save for that too
@@BritishAvgeek ok thanks but I’ve only just got my head around the a320 lol I’ll leave the big birds until I’ve learned everything else I’m just trying to figure out how to read sids & star charts which is a bit confusing as on a few flights I’ve done on the final approach the planes gone all round the world so I’m trying to learn how to correctly choose the right star etc
@@Mandalor_ian I'll be looking at covering a little tutorial for that in the future
It seems this works, but now when i set it back to 43 all my custom views are linked to that. So all of the custom views are "40" in a wrong place.
Not sure why but it bugged out when I restarted it. Not sure if it is sim update 5, but I tested it in the sim, then once I restarted it, they got scuffed up. I am wondering if it is because I forced closed the application. The cameras were in the wrong position after the restart.
Did you reset the view to the original value? If so, it moves the views forward by a value of 40 too so you just need to re-position and re-save them
@@BritishAvgeek So can I edit a number in the file
or do I need to guess the positions 40 ahead
@@BritishAvgeek it also might be that I downloaded your camera file and put it in if that screwed it up but yours didn’t work either
@@jdzzl no - when you minus 40 to go into the cabin to begin setting views, when you're done with one either side you can reset it back to the original value like I show and then go and re-save the camera views again
@@BritishAvgeek yeah that’s what I did and I got it
did everything just the way you did it I saved it CTRL ALT 1 and then went backed added the 4 restarded the sim and i hit alt 1 and it wont go to that camera. like i dont think it saved any input
Did you save the keybinds for it?
I have just tried this several times and it still comes up with the same view which is as if I am standing in the door way looking out . Has anything changed since you originally released this video in Jan 2021 Thanks
Hi, nothing has changed no. Check for my custom view file on flightsim.to and see if those work instead
@@BritishAvgeek Thanks for telling me about your flightsim.to download but unfortunately it produced the same result. I was thinking that it might be the fact that I am using logitech yoke , switch panel and pedals which automatically set up the peripherals. Having said that thanks for all the good work you do and please keep writing your tutorials.
@@margaretmcdonald4839 ah yes you need the same keybinds - Alt+1 etc otherwise you need to set it yourself
Does anyone know how to delete one? I've looked and looked. I like to have a cycle view key... and sometimes it's a pain going through so many
Does this work with the Dev version
Yes it sure does :)
What about 747 8i?
Exact same process :)
@@BritishAvgeek but in folder 747 there are other numbers.
@@brikinyuriy yeah you follow the tutorial the same... Deduct 40 from the number it has instead and then same process
@@BritishAvgeek OK, I'll try. Thanks
Mine don’t save or load for some reason
the camera just goes to a wrong position even tho i put it back to 43 .. pls help ?
when you put it back to 43 it moves all camera positions forward by a value of 43 too so just go ahead and move and resave the cameras again
@@BritishAvgeek i tried several times, nothing works :(
@@robiN-mb5oe yeah you're not doing what I'm suggesting I don't think. Set the value back to 43, then when you load the aircraft again all the views are out of place so just move the views back to where you originally set them and save them again fresh now the value has been reset back to 43... It does work because I do it on every aircraft in the sim I want custom views for
@@BritishAvgeek but how do i move it back to the view where i want them without setting it back to 3 ?
@@robiN-mb5oe just use the left/right up down arrows as you did when you were setting the views earlier
This didn't work for me. All was going well until I reset the config file back to 43, and it had shifted all of my saved custom views by the same amount, so they're all off by 40. What did I do wrong?
Didn't do anything wrong - just move the views back and resave. A quicker "hack" is to set one left and right view at -40 then put the figure back to default and save the rest
how come i don't have increase/decrease view in cockpit ??
You need to set the keybinds as I showed before I spawned in on the video. Set the filter to all as I mentioned and find the camera list to set what is missing
Love how you play CSGO!!
🤣 just on the side every now and again
I don't have the option to move the view with the arrow keys. I've set to all but it's just not there 😭🤔
should have it in the keybind settings to "translate cockpit view left" - assign the left arrow, and so on
@@BritishAvgeek thanks so much mate. Got it. When I reset the config file back my camera views that I set were all off. So reset them again so not sure why we needed to do the config in the first place, I may have done something wrong but fantastic video and thanks for taking the time to explain it. Your fantastic and your videos are a huge help to me and I'm sure thousands of others 🤩
@@Radiomate awesome! Glad it's fixed for you! Thanks also for the really kind words 😀
When I did the thing and I reset it I can’t see my airplane what can I do?
what did you change or do?
@@BritishAvgeek i did -40 and then i did the camera and then i did +40 and now i cant see my a320 anymore
@@gtujjteryjngg5970 the camera might just have decided to warp itself too far away again so look about and use the left right up down arrows to get back to the plane
@@BritishAvgeek I tried that but the whole aircraft is gone
@@gtujjteryjngg5970 then check the file you edited and make sure you didn't delete or edit the wrong bit
Thank you very Much my friend!
you're welcome!
a good habit to teach viewers is to disable the line to change after making a copy and work on the copy line after disabling the original with a semi-colon symbol.
in this way to teach people how to disable a line / how to dicument a modification / how to roll back or trace changes.
lots a punter around - he is no programmer, right ? so then you teach 'em the useful bits, right ?
Hi there nice video but how can I change to default ? I don’t want custom views so how can I get rid of them thanks ❤️
Have you already set custom views? If not then you won't need to delete any. Failing that I'm not actually sure - you'd likely have to backup the old camera.cfg file and then put that back in place of the new one
Very helpful
Glad to hear :)
Thank you so much
No problem hope it helps
@@BritishAvgeek yes sir it finally help the other you tubers videos were very hard your the good one and thats why I have subbed to you thank you! also sorry I cant attend your 1k sub video
@@onebigflappyboi8276 no problem I'm glad you found it helpful
Thank you
my pleasure! :)
There is such a culture these days about - incomplete software -- you YAGI it if you do not want to ask the customer to pay for it.
100th like
nice one!!