Thanks a lot for your comment. The difference between this and other cisterns is how it is mounted. In Scandinavia it is not common to use GIS. The water connection is also connected inside the cisterns and not on the back of the cisterns as in other places in Europe. We hope, this answer helps you.
Which material do you mean? The cistern is a Geberit Sigma 12 tank with PEX fresh water connection. Article Nr. in the Scandinavian catalogues: 111.342.00.2, 111.349.00.5.
@@bigi021 Please check out the catalogue catalog.geberit.hr/hr-HR/cat/CH1_100009/Sistemi/Sustavi-instalacije-i-ispiranja/Geberit-Duofix and contact the local team: Geberit prodaja d.o.o. Ruše Podružnica Zagreb HR-10110 Zagreb Telephone +385 138 678 00 Fax +385 138 678 01 info.hr@geberit.com www.geberit.hr
The minimum pre-wall depth including tileable surface is between 17 and 20.5 centimeters, depending on the cistern (Sigma/ Omega) and the Duofix model (system wall/single element). You can find all the technical details for Duofix Sigma’ on the Geberit.co.uk website too. bit.ly/3oCr87C
Are there jam nuts on the back side of the threaded rod that holds up the toilet? We just installed 2 of these and they keep coming loose from the wall.
Please note: This is a product for Scandinavian countries only. Can you please specify which product you have installed? Normally the rods are firmly fixed in the Duofix frame so if you put on the toilet and fix it firmly, they should not come loose. Please contact the local Geberit team in case there are any further issues.
Notez qu'il s'agit d'une solution pour les pays scandinaves. Pour la France, consulte le catalogue local : catalog.geberit.fr/fr-FR/systems/CH2_100901/products
The difference in the Duofix installation is due of the local requirement related to 1) local water leakage regulations; 2) due of piping method used in the local markets. For this reason Geberit slightly adapted the standard Duofix WC installation element and added needed PEX connection to ensure for local plumbers the possibility to use standard piping system (so called pipe in pipe). this is visible in the video at 4:12. Best regards
@@GeberitGroup Thank you for your answer! Here in The Netherlands we have the connection at the back with 1/2 outside thread. I like the idea to have the connection inside the element, good thinking!
Please note that this is a product especially for the nordic markets. How can we support you? Perhaps you can find the correct product here: www.international.geberit.com/products/
I am considering this system solely based on the outstanding installation video. A company that invests this level of effort on their install video is certainly worthy of my consideration.
Super j'adore cette installation
Merci
Cool videos👍👍😂😂
whats the different between 112cm and this version?
Thanks a lot for your comment. The difference between this and other cisterns is how it is mounted. In Scandinavia it is not common to use GIS. The water connection is also connected inside the cisterns and not on the back of the cisterns as in other places in Europe. We hope, this answer helps you.
When is the hidroinsulation done?
The cistern is already insulated.
What is the measurement for the drain pipe from the finish wall
Please see the instruction here: catalog.geberit.fi/fi-FI/product/PRO_1074870
May I know the name of the materials used?
Which material do you mean? The cistern is a Geberit Sigma 12 tank with PEX fresh water connection. Article Nr. in the Scandinavian catalogues: 111.342.00.2, 111.349.00.5.
This is the second one for the basement bat. th-cam.com/users/postUgkxOuLt8IL_GxhhaK8DBuKEL-zV0UJVpWZn , works great
What is the order code for item that is securing geberit to the wall at 0:50. Thank you
Hi Ivan, this is a specific product for the Nordic region. Where are you from?
@@GeberitGroup From Croatia, does it fit for geberit duofix sigma 12cm? Thank you.
@@bigi021 Please check out the catalogue catalog.geberit.hr/hr-HR/cat/CH1_100009/Sistemi/Sustavi-instalacije-i-ispiranja/Geberit-Duofix and contact the local team: Geberit prodaja d.o.o. Ruše
Podružnica Zagreb
HR-10110 Zagreb
Telephone +385 138 678 00
Fax +385 138 678 01
info.hr@geberit.com
www.geberit.hr
@@GeberitGroup ok, thank you
The toilet flush buttons keep getting stuck.
They hit the flexible pipe behind them.
How do you fix this problem.
Is it since you start using it? Please check the length of the rods.
After installing the wall mounted toilet, the level was high, how to re adjust the level without breaking lots in the ceramic? Any suggestions?
If the wall has been tiled already it might be difficult. The ceramic itself can be unscrewed.
what number is lower Wall Mounting kit? i have 111.300.00.5
Please have a look here: catalog.geberit.no/no-NO/spare-part/SPT_461233 and here: catalog.geberit.no/no-NO/spare-part/SPT_461591
No screws on the floor ?
Optional if you have wall screws in the bottom part.
How deep is the wall at the end after tiling? 160mm?
Depens om the building materials that you are using. Im jusing 18mm wood for the front cover plate. Then i will be around 180-190mm with tiles.
The minimum pre-wall depth including tileable surface is between 17 and 20.5 centimeters, depending on the cistern (Sigma/ Omega) and the Duofix model (system wall/single element). You can find all the technical details for Duofix Sigma’ on the Geberit.co.uk website too. bit.ly/3oCr87C
6pk
Are there jam nuts on the back side of the threaded rod that holds up the toilet? We just installed 2 of these and they keep coming loose from the wall.
Please note: This is a product for Scandinavian countries only. Can you please specify which product you have installed?
Normally the rods are firmly fixed in the Duofix frame so if you put on the toilet and fix it firmly, they should not come loose. Please contact the local Geberit team in case there are any further issues.
Dimension standard combien lageur et largeur
Notez qu'il s'agit d'une solution pour les pays scandinaves. Pour la France, consulte le catalogue local : catalog.geberit.fr/fr-FR/systems/CH2_100901/products
Masalla
Why is the scandanavian duofix differten? Is it because of the drywall that are used there very often?
The difference in the Duofix installation is due of the local requirement related to 1) local water leakage regulations; 2) due of piping method used in the local markets. For this reason Geberit slightly adapted the standard Duofix WC installation element and added needed PEX connection to ensure for local plumbers the possibility to use standard piping system (so called pipe in pipe). this is visible in the video at 4:12. Best regards
@@GeberitGroup Thank you for your answer! Here in The Netherlands we have the connection at the back with 1/2 outside thread. I like the idea to have the connection inside the element, good thinking!
Floor to closet meeter ?
Please note that this is a product especially for the nordic markets. How can we support you? Perhaps you can find the correct product here: www.international.geberit.com/products/
V good
Music is very annoying
This is an old video. In the meantime, we have changed the music to our corporate sound.
15 years
Sigma
sigma
like
Wandtoilette
صند وق زباله
Im plumber
no you are not
Geberlt
Jakup term Gostivar
Debreshe
I am considering this system solely based on the outstanding installation video. A company that invests this level of effort on their install video is certainly worthy of my consideration.