Lol I have never seen someone hate on a Ford 8.8 swap. I have blown up D35’s and D44’s in the rear… I swapped a F8.8 and never had any more problems on my XJ 🤷🏼♂️ Cool YJ by the way!
You have a nice yj. Building the way you wanted is what you're supposed to do. If you had built it the way others wanted you, then you wouldn't have liked it. Great job on it.
Thanks, it just always amazes me how personally people take it when you don't do things the way they say you should. Most of them have never even done the thing they are telling me to do lol.
@@HardEarnedBacon you know, there's nothing wrong with some input, but people shouldn't get mad or upset if you don't do it their way. Some advice is good some ways my be better, but when in comes down to it, it's not their jeep.
Im going to say about 8000. After purchase price. When i did mine i spent around 10,000. With me doing all the work. But it all depends what you want to do with it. Mine is a shitbox but will climb everything! 😆
It works man! And trail tested! Just got back from my shakedown after the rollover and cage install. Damn i missed driving my yj! 😆 Just installed the prp seats they arnt too bad. Hope to see ya on the trail one day. Stay safe and happy trails 👣
I like it! My 88 is very similar to yours. Only differences are that I went SOA on my build and I run a carb on my 4.0 (something I hear flak about as well). Watched your Rubicon run and it looks like it handled it fine. Nice work!!
Been watching your videos for a while. I’ve seen the whole build. Had no idea it was an Islander. I have a 1991 Islander manual 6cyl myself. Some of the mods I can do, some I can’t 👍🏻
Haha yeah it wasn't until I got the registration in my name that the inspection report showed it was an Islander. Explains the holes in the tub from where the step used to be.
Hello I have a 1990 Yj Laredo. My column shift is all over not finding gears. It’s my automatic shift linkage bracket is rusted and not attached. Could you please take a picture of the bracket and where it attaches. Love the Jeep the build is awesome. Thanks
Nice. Great follow-through at the end of the changes to come, ie exhaust down pipe. But what about a floor shifter setup? Something similar to a TJ? Or that LJ you now have? Its a lot easier to slap the shifter into neutral from any forward gear when needed, maybe even pushing the button and getting into the reverse gate, when its on the floor than the column.
The goal is to do a floor shifter and have a trans with a reverse manual valve body. Not sure how soon that will happen though since I am still debating what to do with the engine. I can get a RMVB for the 999 but if I go with something other than the 4.0 I probably won't be keeping that trans. Not sure yet, decisions to be made.
How much of a clearance did you get from the wj Knuckles? I'm actually going full hydro, but if i can get more clearance from my Leafs, i might do that, but I want to make sure it's worth spending some more money to swap.
I didn't do a before and after measurement but it was pretty significant since I went OTK. If you are SOA you can't do OTK because it will hit the springs so it won't be as much clearance.
@HardEarnedBacon I'm staying SUA. Don't care to fight with track bars and anything extra. I was trying to find picture comparison. But wasn't sure either. And I've also been working on redoing my axle mounts vs the factory one.
If I could go back and had the extra time/money when I was building the axles I would go with selectable lockers, at least in the front. At the time that didn't fall into my idea of a "budget build" and this isn't a daily driver so I took the cheaper and easier route of lunchboxes front and rear. Having run the Rubicon and been on some tight trails at Moab and other places I really miss the maneuverability of open diffs and only locking when needing too, plus it's rough on other parts when locked 100% of the time. The LJ will be getting an Ox front and rear for this reason. Otherwise I really wouldn't change much, it is exactly what I thought it would be and wanted.
Lol I have never seen someone hate on a Ford 8.8 swap. I have blown up D35’s and D44’s in the rear… I swapped a F8.8 and never had any more problems on my XJ 🤷🏼♂️
Cool YJ by the way!
Yeah there were a few of them that showed up to comment on my swap video. It was pretty obvious they are just web wheelers though.
Thanks!
Your YJ is what I’m using as a blueprint for what I want mine to be. Have not finished the Rubicon video yet, glad to know she made it through.
Sure did! Not without some bruises though haha
Last of the Real Jeeps.
Man I would never see a comment like this 10 years ago
You have a nice yj. Building the way you wanted is what you're supposed to do. If you had built it the way others wanted you, then you wouldn't have liked it. Great job on it.
Thanks, it just always amazes me how personally people take it when you don't do things the way they say you should. Most of them have never even done the thing they are telling me to do lol.
@@HardEarnedBacon you know, there's nothing wrong with some input, but people shouldn't get mad or upset if you don't do it their way. Some advice is good some ways my be better, but when in comes down to it, it's not their jeep.
I love your YJ, built almost exactly like my last one. If you ever decide to sell it please let me know!
Thanks! No plans to part with it though haha
Good job
Sweet look’n YJ
Thx 4 sharing
Enjoy my man
Thanks!
Good looking Jeep
Thanks!
Love your YJ. I’m in the market for one as I want to leave my JL stock for now. Your build is awesome!
Thank you!
Your yj is pretty much everything I would ever want also! It’s a great build. You should do an itemized cost break down video.
Thanks! I might do that.
Im going to say about 8000. After purchase price. When i did mine i spent around 10,000. With me doing all the work. But it all depends what you want to do with it. Mine is a shitbox but will climb everything! 😆
It works man! And trail tested! Just got back from my shakedown after the rollover and cage install. Damn i missed driving my yj! 😆 Just installed the prp seats they arnt too bad. Hope to see ya on the trail one day. Stay safe and happy trails 👣
Yessir! Need to start looking at PRPs and plan my budget haha
Favorite YJ on TH-cam 🔥
Thanks!
Right on man!
More to come!
Solid build!
Good stuff
Super cool built. You did Rubicon and you like it. Winner!
Thanks!
I like it! My 88 is very similar to yours. Only differences are that I went SOA on my build and I run a carb on my 4.0 (something I hear flak about as well). Watched your Rubicon run and it looks like it handled it fine. Nice work!!
Thanks!
Wait I got a carbed 4.0 as well 👍🏾
Been watching your videos for a while. I’ve seen the whole build. Had no idea it was an Islander. I have a 1991 Islander manual 6cyl myself. Some of the mods I can do, some I can’t 👍🏻
Haha yeah it wasn't until I got the registration in my name that the inspection report showed it was an Islander. Explains the holes in the tub from where the step used to be.
Awesome build!!
Thanks!
Hello I have a 1990 Yj Laredo. My column shift is all over not finding gears. It’s my automatic shift linkage bracket is rusted and not attached. Could you please take a picture of the bracket and where it attaches. Love the Jeep the build is awesome. Thanks
All I have to say is good job. 🤙🏼
Thanks!
How dare you build a jeep the way YOU want to....😁😁
I know right? Terrible.
The stock yj dana 30 is a low pinion.. Nice build..
@@builtbypottsy-byrdkrap No it isn't... Thanks...
Wow i have almost the same setup, except mine is a blue 94 4.0 5 spd
That's a beutifull Jeep!
Thanks!
Nice. Great follow-through at the end of the changes to come, ie exhaust down pipe.
But what about a floor shifter setup? Something similar to a TJ? Or that LJ you now have? Its a lot easier to slap the shifter into neutral from any forward gear when needed, maybe even pushing the button and getting into the reverse gate, when its on the floor than the column.
The goal is to do a floor shifter and have a trans with a reverse manual valve body. Not sure how soon that will happen though since I am still debating what to do with the engine. I can get a RMVB for the 999 but if I go with something other than the 4.0 I probably won't be keeping that trans. Not sure yet, decisions to be made.
You should of just got a buggy lol 😂😂😂😂 the beauty of a keep is what you want to do . Nice jeep buddy ❤
Haha thanks
I have the same setup you have - what springs did you put on the rear to accommodate the 8.8
How much of a clearance did you get from the wj Knuckles? I'm actually going full hydro, but if i can get more clearance from my Leafs, i might do that, but I want to make sure it's worth spending some more money to swap.
I didn't do a before and after measurement but it was pretty significant since I went OTK. If you are SOA you can't do OTK because it will hit the springs so it won't be as much clearance.
@HardEarnedBacon I'm staying SUA. Don't care to fight with track bars and anything extra. I was trying to find picture comparison. But wasn't sure either. And I've also been working on redoing my axle mounts vs the factory one.
hydro assist is super cheap, all you really need is the ram and to drill and tap the box
How did you decide how much airsoft BB’s to put in the tires and what weight of bb’s?
I used a chart online. Just search "balancing bead chart".
what would you do different up until this point?
i cant decide betwen dana 44s or 8.8
If I could go back and had the extra time/money when I was building the axles I would go with selectable lockers, at least in the front. At the time that didn't fall into my idea of a "budget build" and this isn't a daily driver so I took the cheaper and easier route of lunchboxes front and rear. Having run the Rubicon and been on some tight trails at Moab and other places I really miss the maneuverability of open diffs and only locking when needing too, plus it's rough on other parts when locked 100% of the time. The LJ will be getting an Ox front and rear for this reason. Otherwise I really wouldn't change much, it is exactly what I thought it would be and wanted.
😁✌️💪👍👌💯
🤙
Hi I'm in reno nv
I also have a yj
Do you interested
On record a video
I ting is a very col jeep.
Anderson Michael Johnson Sarah Lee Joseph
2009 YJ?
Clark James Brown Eric Martinez Brenda