Like the animation, but opening the heavy condensate outlet before your tower is even filled is not a good idea, your tower isn't on temperature so the outgoing flow would be contaminated with your destilate
Português: Alguém me manda como ocorre todo o Processo da Animação do Video "Debutanizer Column Working Animation". English: Someone sends me as it does all Video Animation Process "Debutanizer Column Working Animation" .
As an operator for the LARGEST MidStream (gas) company in the US? This animation is NOT exactly how it’s done! To each his own, but DONT do it this way. Your inlet feed is a LIQUID. Therefore, it MUST be put through a 3 phase separator (liquid, gas, water) BEFORE it goes to your DeButanizer!!! NOT AFTER!!! Then the HEAVY condensate (C5+) going to Storage or to a DePentanizer comes from the BOTTOMS of the ReBoiler, NOT the bottom of the tower! There is NO gas cooler before the compressor, only a scrubber. You are gonna COMPRESS the gas to gets its “pressure” up to join the pipeline pressure of 600#+...
we have exactly same here, inlet feed is coming from the stripper bottom, directly without any vessels in between, Lean naphtha is drawn from the Debut bottom itself not from reboiler. and if ure talking about the Gas cooler at the overhead Vapour, if it's not there how will lpg is condensed?
Nice presentation of what actually happens.🎉🎉
Thank you very much for the prefect explanation
hi. i am studying petrochemical, so i want to know the software is used simulation this process. May you give the name software? Thank you so much!
Like the animation, but opening the heavy condensate outlet before your tower is even filled is not a good idea, your tower isn't on temperature so the outgoing flow would be contaminated with your destilate
heavy condensate here means Lean naphtha or SR naphtha right?
quite helpful, right now I'm studying how the air purification system made by an American company, namely air product
Thank You very Much
how to separate water from top the tower & water boiling point is above the naphtha ?? why
reboiler temperature is around 170 to 180
I need a logiciel the process
iam engineering in treatment gas .so i want to know the software is used to this simulation
did you ever figure out what software this is?
good simulation ,well done
Nice presentation
good, well done
Nice!!, Please can you give us software name ?
beautiful
good presentation thank You
What's the software name, please?
Português: Alguém me manda como ocorre todo o Processo da Animação do Video "Debutanizer Column Working Animation".
English: Someone sends me as it does all Video Animation Process "Debutanizer Column Working Animation" .
hi. which program?
Start that reflux pump
that good thank you guys
What is programme name?
and thank you
As an operator for the LARGEST MidStream (gas) company in the US? This animation is NOT exactly how it’s done! To each his own, but DONT do it this way.
Your inlet feed is a LIQUID. Therefore, it MUST be put through a 3 phase separator (liquid, gas, water) BEFORE it goes to your DeButanizer!!! NOT AFTER!!! Then the HEAVY condensate (C5+) going to Storage or to a DePentanizer comes from the BOTTOMS of the ReBoiler, NOT the bottom of the tower! There is NO gas cooler before the compressor, only a scrubber. You are gonna COMPRESS the gas to gets its “pressure” up to join the pipeline pressure of 600#+...
This is exactly how it looks in other refineries
we have exactly same here, inlet feed is coming from the stripper bottom, directly without any vessels in between, Lean naphtha is drawn from the Debut bottom itself not from reboiler. and if ure talking about the Gas cooler at the overhead Vapour, if it's not there how will lpg is condensed?
@bigsteve6713 hello dear mr steve could you please provide your email i have some question?
@@sbslm1can i ask you some question
@@sarhangbarznjy1359 yes, but I'm not an expert tho
#1358 👍