What if firewall is connected to a ISP router and firewall is having private WAN IP from router. How will users from outside connect to private WAN IP via FORTICLIENT?
@@vz4798 I have got the answer man after searchng for so long. So what we need to do is to enable NAT so that the WAN IP of the router can translate to the LAN IP and then specify the external and internal ports.
Thanks for the video. I am a beginner to this fortigate. It worked well when I am in the same network but when I used 4G on my phone and tried to connect using WEB or FortiClient on the 4G it did not work and when I came home and I wanted to modify something on my firewall I couldn't access. please tell me how?
Can i setup up the vpn for my home user to access my home qnap without FortiGate firewal subscriptions i only bought second hand FortiGate firewal device 60F?
Tunnel all refers to all the traffic. The traffic that is Destin for the privet networks as well as any traffic going out to the internet will be sent to the firewall. Thanks for your comment and be sure to subscribe for new content.
I have my setup exactly as yours, but when I connect to the VPN I can RDP into my desktop but I can't ping it. Is there another step to allow ping to work? I do have my service set to ALL Thank you! Edit: I also have ping enabled on the interface
can we have a custom installer so that end-user when connect to SSL VPN they directly get the installer with preconfigured settings so they just enter credentials and use?
Hello Mat, This guide is great. by the way just want to confirm if on this guide you also have a Forticlient subscription in place or just the free forticlient is used?
Hello - I was able to use one of your videos to build a vpn tunnel between 2 locations. Do you have a video on how to configure VPN users to log into location 1 and then be able to access location 2 via the VPN tunnel between the 2 locations?
I have the Fortigate VPN. I'm using it to access a NAS on my network via a mapped network drive. When I'm outside, the problem is, I'm using the actual internet that is on my network, which causes huge delays in regular internet use, as I'm limited to the upload speed back to my PC. Is there a way to configure the Fortigate VPN to only access the network drive and use my internet wherever I am located?
1:53 In the IPV4 policy, how did you get SSL VPN tunnel interface automatically? I am not getting that interface, I am only getting WAN and INternal LAN interface. How to set it up?
![[Full] 4 ต่อ 4 Celebrity EP.920 | 3 พ.ย. 67 | one31](http://i.ytimg.com/vi/KwiW2M_kAg4/mqdefault.jpg)
For assistance please visit our website for support www.firewalls.com/wd/firewall-configuration/
Straight to the point with no fluff!!
Thanks guy! resolved my problem in min.
Your vids are top mate. Keep it up
What if firewall is connected to a ISP router and firewall is having private WAN IP from router. How will users from outside connect to private WAN IP via FORTICLIENT?
Please answer this
@@vz4798 I have got the answer man after searchng for so long. So what we need to do is to enable NAT so that the WAN IP of the router can translate to the LAN IP and then specify the external and internal ports.
@@azee6532 that’s it? Literally enable NAT on the FortiGate policy? Lol I’m banging my head against the wall if it’s this simple
thank you for the video ! This helped me alot.
Thanks for the video. I am a beginner to this fortigate. It worked well when I am in the same network but when I used 4G on my phone and tried to connect using WEB or FortiClient on the 4G it did not work and when I came home and I wanted to modify something on my firewall I couldn't access. please tell me how?
Can i setup up the vpn for my home user to access my home qnap without FortiGate firewal subscriptions i only bought second hand FortiGate firewal device 60F?
I do have a question here, how many SSL/IPSEC VPN settings can be created in a firewall?
Does this tunnel all traffic to the fortigate branch or just the traffic going for internal resources? Great video btw.
Tunnel all refers to all the traffic. The traffic that is Destin for the privet networks as well as any traffic going out to the internet will be sent to the firewall. Thanks for your comment and be sure to subscribe for new content.
if i wanna setup it for my office local network access from public or outside, this will also help right?
Thank you so much, this just made my job easy.
Can forticlient work with Smart Card Authentication, like Smart Card User Cert authentication only without the user password?
Please sir this probelm appears to me when i try to connect on my pc while working from home (credential or ssl vpn configuration is wrong (-7200)).
Hi there
I am wondering if FortiGate 60E comes with VPN licenses
Easy and Straightforward video. Thanks man!
Very nice guide, now I have my VPN up and running. Thanks a lot.
Nice demonstration, thanks
You are welcome!
Do you have a video on how to setup an SSL-VPN with a split tunnel?
I have my setup exactly as yours, but when I connect to the VPN I can RDP into my desktop but I can't ping it. Is there another step to allow ping to work? I do have my service set to ALL
Thank you!
Edit: I also have ping enabled on the interface
off firewall and anti virus
Thank You it's Work
Simple and objective, fantastic explanation, thanks
Thanks very much for the feedback, and for watching!
Can you pls show the tunnel mode configurations as well
Ihr seid so geil!!
hello there, does Forticlient masks the user's IP address just like Outline VPN (or Nord VPN)
Just what I was looking for. Thanks!
Thanks Bud !
can we have a custom installer so that end-user when connect to SSL VPN they directly get the installer with preconfigured settings so they just enter credentials and use?
Thank you so much for sharing this guide.
Hello Mat, This guide is great. by the way just want to confirm if on this guide you also have a Forticlient subscription in place or just the free forticlient is used?
Hello - I was able to use one of your videos to build a vpn tunnel between 2 locations. Do you have a video on how to configure VPN users to log into location 1 and then be able to access location 2 via the VPN tunnel between the 2 locations?
you have to create one more policy at loc 1 to route ssl traffic in between
@@umairiqbal8747 Hello can you show an example?
I have the Fortigate VPN. I'm using it to access a NAS on my network via a mapped network drive. When I'm outside, the problem is, I'm using the actual internet that is on my network, which causes huge delays in regular internet use, as I'm limited to the upload speed back to my PC. Is there a way to configure the Fortigate VPN to only access the network drive and use my internet wherever I am located?
Were u able to get an answer for this?
@Jacobbacila it was in the "tunneling" section. Now it's good
This is amazing man.
Thank you for the video
Thanks very much for the feedback, and for watching!
Worked for me, ty!
thanks for sharing brilliant information..
Thanks very much for the feedback, and for watching!
Hi Matt, Can you help me how can I change my primary isp. Thank you
hi this is possible my synology nas connect other fortinet and using forticlient?
Much easier to understand than the manual. Thank you😊
Glad it was helpful!
Hi,, i installed forticlient now its showing unlicensed and showing 30 days access , i dont know how to check license of vpn
I can connect from my internal network. But I cant connect to the FortiClient VPN from any outside network. Anyone know why?
1:53
In the IPV4 policy, how did you get SSL VPN tunnel interface automatically? I am not getting that interface, I am only getting WAN and INternal LAN interface. How to set it up?
he didnt explain it completely
Tks for your video.I've a question. Why forticlient do not warn for invalid server certificate?
Will you please upload the the for beginners
Thank you so much for this tutorial
I have 2 firewall in my onprimes. 1st FW normal configure I know and 2nd VPN only How to configure
Why do you recommend a hotspot?
Please make video on how to open firewall port on fortinet firewall
Introdução bala.
Nice info.!!
FortiClient Lunch console which username and password given
How I can access to local devices?
Adding users to group not shown
How to get same IP addresses as the internal network ?
I keep getting input value not valid - can't get past it
RIP head phone users at start of the video.
hahaha yes...
awesome
Thanks for the feedback, and for watching!
this one is incomplete.. you didnt mentioned all the requirement. waste.. so many option didnt get for novice person
thank you man. it helped a lot
Glad it helped