This is the best tutorial about a gearbox i have seen so far. Great footage, showning clearly the components and not to much information. Step by step clear instructions. Really good stuff!
Okay...so you showed us how to rewire the gearbox to the rear. What I'd like to see, is a comprehensible video on how to install a Crane stock to hold a battery. Cause it isnt really clear to me, how to get the cables into the stock. Is that possible at all?
What would cause the aeg to fire when the selector is moved from semi to auto? I suspect a short but I'm having trouble tracing it. It sometimes bursts but it's not consistent. Almost like a wire is brushing against another and sometimes taps whatever it is contacting.
I'm thinking about getting a mosfet wire system. I recently put alot of upgrades into my v2, including new gears, a heavier spring, a high torque motor and a 9.6v battery. It doesn't fire right and I've been having alot of heating problems whenever I test the gear shimming and it literally just doesn't work. Could the problem be my old style wiring? (6mm tokyo marui m4a1 gearbox)
im haveing a problem were the little plastic piece with the metal on it keeps coming off. itdoesnt stay put when the spring is on. It just pops back and the trigger doesnt catch. does this mean I need a new wire set?
HELP! My gun won't switch to full auto! The selector plate isn't going back enough. The cut off lever's thing where you put the spring on (1:22) jams between selector plate and gearbox! Safe and semi works.
Hey maybe you guys can help me? my gun was not firing at all, fuse is fine. took gun apart and cleaned trigger contacts now it fires, ok cool. put gear box back into outer shell loosely selector switch works fine. once its all tight it will only go into semi and get stuck. will not go into full auto what am I doing wrong? the little stub under the cutoff lever broke is this the issue?
is this how you would wire up a crane stock srry if that is a stupid question i don't really tech on my own guns i own a AGM Full Metal 614 AEG and it has a PEQ box and i want to put a crane stock so could you or someone help me out? plz and thank you
@Mechbox6mm More ADS ;D, but I am not mad ad the ADS, so don't worry! I actually miss the days without video updates and I trust you guys about the gearboxes, Have a nice day!
This is the best tutorial about a gearbox i have seen so far. Great footage, showning clearly the components and not to much information. Step by step clear instructions. Really good stuff!
Why did you ake off the selector plate i didnt see a point in that
Okay...so you showed us how to rewire the gearbox to the rear. What I'd like to see, is a comprehensible video on how to install a Crane stock to hold a battery. Cause it isnt really clear to me, how to get the cables into the stock. Is that possible at all?
Very Informative man..!!!
Thx so much!!!
What would cause the aeg to fire when the selector is moved from semi to auto? I suspect a short but I'm having trouble tracing it. It sometimes bursts but it's not consistent. Almost like a wire is brushing against another and sometimes taps whatever it is contacting.
Awesome video
Do you need a soldering iron to rewire the gearbox?
I'm thinking about getting a mosfet wire system. I recently put alot of upgrades into my v2, including new gears, a heavier spring, a high torque motor and a 9.6v battery. It doesn't fire right and I've been having alot of heating problems whenever I test the gear shimming and it literally just doesn't work. Could the problem be my old style wiring? (6mm tokyo marui m4a1 gearbox)
Very detail, thanks!!!
Why do you have to remove everything just for replacing the switch assembly?
im haveing a problem were the little plastic piece with the metal on it keeps coming off. itdoesnt stay put when the spring is on. It just pops back and the trigger doesnt catch. does this mean I need a new wire set?
HELP!
My gun won't switch to full auto! The selector plate isn't going back enough. The cut off lever's thing where you put the spring on (1:22) jams between selector plate and gearbox! Safe and semi works.
were did you get the new trigger switch?
I cant get my selector plate off it wont come off
Hey maybe you guys can help me? my gun was not firing at all, fuse is fine. took gun apart and cleaned trigger contacts now it fires, ok cool. put gear box back into outer shell loosely selector switch works fine. once its all tight it will only go into semi and get stuck. will not go into full auto what am I doing wrong? the little stub under the cutoff lever broke is this the issue?
where can I get one of these kits
is this how you would wire up a crane stock srry if that is a stupid question i don't really tech on my own guns i own a AGM Full Metal 614 AEG and it has a PEQ box and i want to put a crane stock so could you or someone help me out? plz and thank you
@Mechbox6mm That's great to know :D
how soon?
That was pretty fucking helpful.
What ever happened to rewiring it, you just showed us how to take apart our gearbox and buy a new wire set.
@Mechbox6mm More ADS ;D, but I am not mad ad the ADS, so don't worry!
I actually miss the days without video updates and I trust you guys about the gearboxes, Have a nice day!
He ends the video right before the trigger pops back out and the spring flies across the room, its such a pain in the ass
@Mechbox6mm Advertisements :D
Can't watch anymore, music is just too dramatic