No, usually adjusting the drive belt will not effect the resistance. Why is the console not working? if you can change the resistance on the console and the wires and motor are operational then the bike should become more usable. I would repair/replace the console if you know what is wrong with it.
@@FitnessEquipmentHelp the resistance control on the console isn’t working nor any , I’m thinking now maybe the console should be replaced. Thanks much
I Have a similar looking bike Which is a BH upright bike S5Ui which the Tech tells me the company went out of Business my problem is the computer just shows E1 on the screen the tech is looking to get me anew computer, but I doubt it i was thinking could I tighten the tension up I'm Having Knee surgery at least it something until after Surgery Thanks
03.012.22 - I just bought the same bike , my issue is the resistance is a little too tight for me 2 knee replacements so I'm going to loosen the adjustment a little.
Don't loosen the drive belt if the resistance is too high. this will just cause the belt to slip and belt to wear out prematurely. Make an adjustment to your resistance mechanism. Most equipment uses a resistance mech like seen in this video. th-cam.com/video/B1J_i3k55Es/w-d-xo.html
@@FitnessEquipmentHelp Yep that's what I did. loosened the resistance a little and it works well, latter as the legs strengthen I'll change it back. I had no idea that modern upright bikes come with the flywheel thingy's.
That is a great question. I however would refer you to your doctor or an exercise physiologist. This channel is moderated as a technical forum for iFit brand fitness equipment.
After finally opening my machine, it seems there is no adjustable part. I'm in Japan so I assume the manufacturer doesn't expect buyers to tinker since DIY isn't common here. I don't think the belt is stretched out so I guess the bike isn't meant to be very challenging? So disappointed, but still appreciate your video.
My bike has resistance from 1 to 20. When I increase or decrease resistance, it changes on screen but in reality its staying on 1 or 2. I have a similar Schwinn bike as shown in video. Please advise how to fix the resistance.
If its battery operated the first thing I would do is make sure it has fresh batteries. If you believe the resistance mechanism is not working correctly i have found that usually a visual inspection finds the issue quickly.
Your Demo shows the cover being removed so easily. However on the Trojan Shape 210 there is no where to remove the side covers. the pedals are very close. ??
I don't have any experience with that bike but it looks like the crank is very similar. All of these solid one part cranks should have enough clearance to remove the side shields over the crank arms. They had to be installed that way after all. there is likely a pest position for the crank arm. I would try moving the crank arm to different positions and you will also likely need to flex the plastic some what to "finesse" it off. I recommend doing it someplace warm as cold plastic is more prone to breaking.
I have an RB 1000. Everything works except the 'Load up' function does nothing, all levels (1-8) give no or very little resistance. I've changed the batteries but still no resistance felt. What can I do?
I have a similar model that will not detect movement when I start pedaling. It shuts off due to a lack of movement. Any idea how I might be able to fix this? Thanks in advanced
there is a movement sensor called the "reed switch" inside your equipment. it needs to be positioned to within about 1/8th of an inch from where the magnet on the crank pulley passes sensor bracket. Most user's manuals have instructions on how to adjust this sensor as it may need to be repositioned from time to time.
I have a Reebok Rb 1000 (magnetic). It is running a little rough. Took apart but cannot see much wrong. Any ideas? Do I need to oil some parts? Do I need to tighten, it never slips. Also, look down at the cranks when peddling and they seem to be not in alignment (wonder slightly). I wonder if this is causing my hip pain. But they seem tightly on and no play.
I have just purchased the same bike in your video the pro form 135 csx and every time I pedal it makes a click/knock noise and I can feel it in the pedals. Is the belt too tight? I don’t think it’s loose because it doesn’t seem to slip. I’m really frustrated being I just bought it 5 days ago. Any help would be much appreciated.
If the occurrence of the noise is always at a certain point in the revolution then it is likely related to the crank or possibly the pedals. I don't think the belt would be too tight. Over tightened belts do put excess pressure on internal components like the bearings. I would first loosen the belt. the best belt tension is as loose as possible but not so loose that it slips. If it gets too loose and slips, tighten it it up just enough to correct the slipping .
@@jacobwilhelm7114 I bought the power adapter for it instead of using batteries and since then the noise went away. Not sure if that was the culprit but it's worth a shot....good luck
do you know how to fix the squeaky noise from the seat stem? I notice there is a plastic sleeve between the stem and the base, and I think the noise must be coming from there. I have already tried to lubricate all related parts.
Anything moving that is not supposed to can cause a noise. making sure everything is tight is the best way to eliminate noise. if the parts cant be tightened because the bushing is damaged or worn out then I would recommend replacing the seat post bushing.
The video may not match every model precisely, but should indicate the general procedure for most models. To adjust the tension of the belt on most late model exercise bikes you will need to remove the side shields to access the belt tensioner. Most belts are tensioned with an idler pulley pressing against the belt. Loosen any bolts that may be holding the idler arm then adjust the position of that arm. Lock the arm into place then replace the side shields. Your user's manual may have specific instructions for your model. Do be careful when loosening the drive belt on your bike. A belt that is too loose will slip when pedaled.
Do you have an email? I have some questions about my exercise bike and I've tried so many things. To get it back to it's top shape. I would appreciate your help. It's a BRB 5200 Magnetic Recumbent Bike
We specialize in repairing most fitness products, though for some machines it is best to contact your manufacturer. It looks like that would be Body Flex Sports, Inc. Heres the contact info we found for their customer support: Telephone: (888) 266 - 6789 • Email: info@bodyflexsports.com. We would still love to help if you need us, you are welcome to PM us here: th-cam.com/channels/cn609zIiXUEbTohRxoqcyw.htmlabout
@@boris.zuniga6468 You will want to find the cable or linkage that connects the tension motor to the magnet bracket. you may find there is an adjustment that will allow you to set it manually.
@@FitnessEquipmentHelp i found a whole to connect a charger of 9 v ....this is the only way that it could turn on the screen and then put more resistance ? Or you suggest i open the machine ?
I've been sent to this page by Nordic Track in lieu of them sending an engineer to my house. The standard of customer service is absolutely abject and I won't - ever - buy a Nordic Track product again. They're cowboys.
I hope this video will help you make adjustments and be able to properly maintain your equipment. Typically belt adjustments and other maintenance procedures are not covered by the manufacturers warranty.
The best instructional video on youtube.
Thanks. Would you also have a video that explains how to eliminate grinding noises while pedalling in the same kind of bike.
My monitor isn’t working and the resistance is really tough for me to ride....will following the instructions fix this problem
No, usually adjusting the drive belt will not effect the resistance. Why is the console not working? if you can change the resistance on the console and the wires and motor are operational then the bike should become more usable. I would repair/replace the console if you know what is wrong with it.
@@FitnessEquipmentHelp the resistance control on the console isn’t working nor any , I’m thinking now maybe the console should be replaced. Thanks much
I'm having the same issues some reason I'm having hard time to pedal and to adjust the resistance how can I fix this issue
I Have a similar looking bike Which is a BH upright bike S5Ui which the Tech tells me the company went out of Business my problem is the computer just shows E1 on the screen the tech is looking to get me anew computer, but I doubt it i was thinking could I tighten the tension up I'm Having Knee surgery at least it something until after Surgery Thanks
Awesome instructions, thank you. I fixed my bike.
Thanks I'll try this. I'm pretty sure my issues are with the belt.
I have the same bike and the resistance does not change. Any ideas how to fix this ?
03.012.22 - I just bought the same bike , my issue is the resistance is a little too tight for me 2 knee replacements so I'm going to loosen the adjustment a little.
Don't loosen the drive belt if the resistance is too high. this will just cause the belt to slip and belt to wear out prematurely. Make an adjustment to your resistance mechanism. Most equipment uses a resistance mech like seen in this video. th-cam.com/video/B1J_i3k55Es/w-d-xo.html
@@FitnessEquipmentHelp Yep that's what I did. loosened the resistance a little and it works well, latter as the legs strengthen I'll change it back. I had no idea that modern upright bikes come with the flywheel thingy's.
How long should a 70 year old ride an exercise bike?
That is a great question. I however would refer you to your doctor or an exercise physiologist. This channel is moderated as a technical forum for iFit brand fitness equipment.
After finally opening my machine, it seems there is no adjustable part. I'm in Japan so I assume the manufacturer doesn't expect buyers to tinker since DIY isn't common here. I don't think the belt is stretched out so I guess the bike isn't meant to be very challenging? So disappointed, but still appreciate your video.
I don't know I can add this link with a picture imgur.com/a/4he23ul
My bike has resistance from 1 to 20. When I increase or decrease resistance, it changes on screen but in reality its staying on 1 or 2. I have a similar Schwinn bike as shown in video. Please advise how to fix the resistance.
If its battery operated the first thing I would do is make sure it has fresh batteries. If you believe the resistance mechanism is not working correctly i have found that usually a visual inspection finds the issue quickly.
Your Demo shows the cover being removed so easily. However on the Trojan Shape 210 there is no where to remove the side covers. the pedals are very close. ??
I don't have any experience with that bike but it looks like the crank is very similar. All of these solid one part cranks should have enough clearance to remove the side shields over the crank arms. They had to be installed that way after all. there is likely a pest position for the crank arm. I would try moving the crank arm to different positions and you will also likely need to flex the plastic some what to "finesse" it off. I recommend doing it someplace warm as cold plastic is more prone to breaking.
@@FitnessEquipmentHelp Thank you so Much I will Try again.
I have an RB 1000. Everything works except the 'Load up' function does nothing, all levels (1-8) give no or very little resistance. I've changed the batteries but still no resistance felt. What can I do?
I have a similar model that will not detect movement when I start pedaling. It shuts off due to a lack of movement. Any idea how I might be able to fix this? Thanks in advanced
there is a movement sensor called the "reed switch" inside your equipment. it needs to be positioned to within about 1/8th of an inch from where the magnet on the crank pulley passes sensor bracket. Most user's manuals have instructions on how to adjust this sensor as it may need to be repositioned from time to time.
I have a Reebok Rb 1000 (magnetic). It is running a little rough. Took apart but cannot see much wrong. Any ideas? Do I need to oil some parts? Do I need to tighten, it never slips. Also, look down at the cranks when peddling and they seem to be not in alignment (wonder slightly). I wonder if this is causing my hip pain. But they seem tightly on and no play.
I would check to make sure the crank bearings are assembled tightly.
I have just purchased the same bike in your video the pro form 135 csx and every time I pedal it makes a click/knock noise and I can feel it in the pedals. Is the belt too tight? I don’t think it’s loose because it doesn’t seem to slip. I’m really frustrated being I just bought it 5 days ago. Any help would be much appreciated.
If the occurrence of the noise is always at a certain point in the revolution then it is likely related to the crank or possibly the pedals. I don't think the belt would be too tight. Over tightened belts do put excess pressure on internal components like the bearings. I would first loosen the belt. the best belt tension is as loose as possible but not so loose that it slips. If it gets too loose and slips, tighten it it up just enough to correct the slipping .
I just bought the same bike and have the same issue. Were you able to resolve it?
I also have the same issue, any solutions?
@@jacobwilhelm7114 I bought the power adapter for it instead of using batteries and since then the noise went away. Not sure if that was the culprit but it's worth a shot....good luck
do you know how to fix the squeaky noise from the seat stem? I notice there is a plastic sleeve between the stem and the base, and I think the noise must be coming from there. I have already tried to lubricate all related parts.
Anything moving that is not supposed to can cause a noise. making sure everything is tight is the best way to eliminate noise. if the parts cant be tightened because the bushing is damaged or worn out then I would recommend replacing the seat post bushing.
What if you don't have same bike as me?!
The process once you get under the side shields should be similar. If not check your users's manual for specific instructions for your bike.
my belt is too tight - however there are only two screws insode not three. any tips?
The video may not match every model precisely, but should indicate the general procedure for most models. To adjust the tension of the belt on most late model exercise bikes you will need to remove the side shields to access the belt tensioner. Most belts are tensioned with an idler pulley pressing against the belt. Loosen any bolts that may be holding the idler arm then adjust the position of that arm. Lock the arm into place then replace the side shields. Your user's manual may have specific instructions for your model. Do be careful when loosening the drive belt on your bike. A belt that is too loose will slip when pedaled.
Thank you!
Do you have an email? I have some questions about my exercise bike and I've tried so many things. To get it back to it's top shape. I would appreciate your help. It's a BRB 5200 Magnetic Recumbent Bike
We specialize in repairing most fitness products, though for some machines it is best to contact your manufacturer. It looks like that would be Body Flex Sports, Inc. Heres the contact info we found for their customer support: Telephone: (888) 266 - 6789 • Email: info@bodyflexsports.com. We would still love to help if you need us, you are welcome to PM us here: th-cam.com/channels/cn609zIiXUEbTohRxoqcyw.htmlabout
that ' s so expensive. We have similar one If you want to know. Please no hesitate to contact me.
My screen is broke ...can i put a heavier resistance by hand?????
probably, most resistance mechanisms have some adjust ability. What is your specific model number?
@@FitnessEquipmentHelp schwinn 103
@@boris.zuniga6468 You will want to find the cable or linkage that connects the tension motor to the magnet bracket. you may find there is an adjustment that will allow you to set it manually.
@@FitnessEquipmentHelp i found a whole to connect a charger of 9 v ....this is the only way that it could turn on the screen and then put more resistance ? Or you suggest i open the machine ?
@@boris.zuniga6468 Definitely use the 9 volt power supply and use the machine as intended before making adjustments manually.
02:16,
I've been sent to this page by Nordic Track in lieu of them sending an engineer to my house. The standard of customer service is absolutely abject and I won't - ever - buy a Nordic Track product again. They're cowboys.
I hope this video will help you make adjustments and be able to properly maintain your equipment. Typically belt adjustments and other maintenance procedures are not covered by the manufacturers warranty.