I have a orange spider turning head the fabric is wearing out pretty much its a 2013 one do you think i should flex seal it the full thing? And even should i use a tarp cover on rainy days when its outside or how does the cracks work on it?
Sadly there’s no good way of fixing inflatables. Flex seal only works for a small amount of time. I personally wouldn’t waste time on it. But if you’d want to then I’d do the whole thing. I wouldn’t use a tarp, it would probably make it worse sadly.
I have a 15’ hot air balloon that won’t inflate all the way and stand up. There’s no tears or anything. Air is leaking thru the fabric. I removed a big blower fan from another inflatable and I added it to the blower fan inside the balloon, so now it’s got two blower fans, still won’t air up completely, balloon won’t stand up, I’ve tried boot water repellent on another inflatable and did NOT work. I am going to try this flex seal spray. Thanks for posting this!
Hi! So it sounds like the item is completely worn out. I sadly have discovered over the years that flex seal is only temporary and doesn’t work all the time. Personally I would throw the item away. But if you’re able to take the time to try flex seal I say do it. It’s sadly won’t work forever. But you’re welcome for the video.
Is there a particular type of flex seal spray? I went on amazon and found the cheap one for $25 for a set of.
Jayden the haunter/gemmy collector 1213 yes in my next video I’ll show what I use
Jayden the haunter/gemmy collector 1213 and I believe Isaiah just bought that one too
I have a orange spider turning head the fabric is wearing out pretty much its a 2013 one do you think i should flex seal it the full thing? And even should i use a tarp cover on rainy days when its outside or how does the cracks work on it?
Sadly there’s no good way of fixing inflatables. Flex seal only works for a small amount of time. I personally wouldn’t waste time on it. But if you’d want to then I’d do the whole thing. I wouldn’t use a tarp, it would probably make it worse sadly.
You should try painting Thompson’s water 💧 seal on a worn out one
It doesn't work. I tried.
I flex sealed my 10 foot snowman. Really good. Im not gonna coat this yr but next yr ill do it again
I have a 15’ hot air balloon that won’t inflate all the way and stand up. There’s no tears or anything. Air is leaking thru the fabric. I removed a big blower fan from another inflatable and I added it to the blower fan inside the balloon, so now it’s got two blower fans, still won’t air up completely, balloon won’t stand up, I’ve tried boot water repellent on another inflatable and did NOT work. I am going to try this flex seal spray. Thanks for posting this!
Hi! So it sounds like the item is completely worn out. I sadly have discovered over the years that flex seal is only temporary and doesn’t work all the time. Personally I would throw the item away. But if you’re able to take the time to try flex seal I say do it. It’s sadly won’t work forever. But you’re welcome for the video.
When you spray these with flex seal how do you know if you missed any spots especially on such a large area?
You have to let it dry, and then what I do is I go out at night and see if I can see any thin spots and hit them agin
I’m experimenting with it too
So once you flex seal it and it dries, your fine? No rips should exist?
So the flex seal has problems with rain when it hasn’t cured yet? So once it drys you’re fine?
Does the inflatable needs to be inflated? Or it can be done with our air in it?
Anytime you do this it needs to be inflated
@@holidaymaster82 thank you
Any way I can contact you to possibly get more personal help? (If you have time)
Great video man
Brandon the inflatable expert 2 thanks man
No problem
Does this official works cause i want to get a rare inflatable that has a fabric issue
Yes and no. For some inflatables it works better then others, however it does not seal it permanently.