2020 Honda Odyssey Roof Rails and Cross Bars Install for models 2018-2020 | DIY roof rack
ฝัง
- เผยแพร่เมื่อ 2 พ.ค. 2020
- Our previous 2007 Honda Odyssey came with roof rails from the factory, and I added on the crossbars when I bought the storage topper. Now they don't even come with a roof rack. When I bought the new 2020 Honda Odyssey the dealership quoted me almost $1,000 for the add-on. I said no thanks and decided to figure out how I could get it done cheaper. But the installation turned out to be more involved than I anticipated. In this video, I will walk you through what I had to do to get this installed. In the end, I still would have bought it myself.
Here's a link to buy the crossbars (2018-2022) - amzn.to/3COKilA
Here's the link to buy the roof rails (2018-2022) - amzn.to/3cOseaj
Here's a link to the installation instructions - tinyurl.com/y8m2af52 - แนวปฏิบัติและการใช้ชีวิต
![รวมเพลงลูกทุ่ง 6 หนุ่มไทบ้าน ฮิตติดกระแส ชุดที่ 1 l มนต์แคน ไมค์ ไผ่ เสถียร ไหมไทย พี [Longplay]](http://i.ytimg.com/vi/GD2v1OjMw5I/mqdefault.jpg)
Thank you for posting this video. I just installed my roof rails and crossbars a few weeks ago and followed your video through the entire process. Thanks again!
Nice job! Glad it was helpful
This video was extremely helpful and filmed in a very easy way to follow. You’re awesome, thank you!
You are so welcome!
Thank you so much, I was able to install my rails on a Honda Odyssey 2015 LX. I used the Honda rails, and it was perfect of course. I have basic skill with stuff like this, but, you gave me confidence to try. It worked out perfectly! I think it took me about 1.5 hours to finish it
Awesome, great job!
It's Saturday, so I'm going to be tackling this today. I have much more confidence after seeing you do it. Thanks so much for your diy guide!!!!!
Done! Took just under 2hrs, mainly b/c of some shortcuts on the 2nd side. (Using tin snips to simply cut the trim 1" from the mounting bolts instead of measuring and sawing everything) Thanks again for your video!!!
Nice job!
@@roger3958 smart!
Great video! I just did the same for a Honda Passport. Similar issues but it all worked out. Saved a ton of money!
Nice job! I agree, glad it helped!
I was thinking "how hard could this be?" And now I know! Thanks for posting this! Momma will have a great Valentine's Day with her new 2023 Odessey Sport in Radiant Red!
Lol, it wasn't too bad. Good luck!
Thank you very much for providing this information. I will be assisting my son in installing the equipment on his 2020 Honda Odyssey in the upcoming days, and your instructional video will be extremely beneficial to us. Your expertise and guidance are greatly appreciated.
Awesome, it was a fun project. Good luck!
Thank you for sharing this. I just got my rails and cross bars installed on my ‘19.
Nice, should be the same for both years.
Thanks Carolina Cowboy. Your video was very helpful. I used it to successfully install the rails and crossbars today on our 2021 Ody. Much appreciated!
Great to hear!
Thanks to this video I was able to figure out putting on my rails. You the man.
Rock on!
Just bought a 2020. Will be using this to install. Thank you very much.
Right on!
Thanks so much! I'll be doing this installation with my son on his Honda in a couple of days and your video will be a huge help.
Good luck!
Epic install content. I just ordered a set for our new van. Bravo
Awesome!
Thank you! Your video instructions are absolutely perfect. It made my installation very easy. The only tool I needed was the small plastic crowbar. I bought a nice set of plastic shim tools that included the crowbar at a local auto parts store. Easy day.
Awesome, nice job!
What an outstanding video! So well done. I have a 2019 Odyssey and will install this system. Thank you so much for doing this!
Glad it helped!
Thank you sooooo very much for this detailed video. I just followed your steps and was able to install the rails.
Awesome!
Damn you rock. I just got my 2020 EX-L. going to do the same. Thanks for your video!
Good to hear!
Thank you so much very helpful I’m going to buy them and install them my self great video
Good luck!
Thanks for putting this together. I had seen a few other videos, but they did not go into as much detail. I'll putting mine on this weekend. We will see if it takes me more than one weekend to do it!
Good luck!
Thanks you for your help. Your video helped me install my roof rails. Great video
Glad I could help!
Right on man,
I’m ready to install mine now!
Best of luck to you!
Thank you for the video! I appreciate you leaving the sneezing in and the dropping pieces lol. Very real for me because its not always perfect 1000% of the time lol as much as we'd love to not drop our custom pieces that would probably cost 900$ from the dealer! Anyways cheers my friend!
LOL, i'm happy to be entertaining and somewhat educational too!
Looks like it doesn’t need “cutting”. The mounts rest above the rail… not between the cuts… so I just drilled holes matching the male mount bolts and attached the base that way. With blue locktite… was a bit easier that way, I feel.
Great video tho! Thanks.
That could work, I was just following the dealer instructions.
!!!! nice one
Thanks for the tip, seems like a good bit easier job w/out the cutting. Question: Where does the Blue Loctite come into play if you’re not going to cut, but drill holes? Cheers, J
Sweet video dude just got the odyssey but have a roof storage from my previous car I want to use it for the odyssey this video really help
That would be great if you could do that
this was SO helpful. You did all the fumbling so I didn't have to! Truly appreciate this! So much so I won't make fun of your sock/sandle thing you have going on. :).
That's kinda my signature thing now. :-) Glad it was helpful!
@@CarolinaCowboys ha! seriously appreciate it tho. Got thru it in a jiffy bc of you. :)
Thank you for this video, family trips with just the back storage is getting to the limit. I have a 2022 Odyssey but it looks like it might fit. Also like the quake t-shirt.
LOL, I always wonder if there are any QCon'ers out there watching my videos. Yes this should be the same kit
What a meditating video. Thanks
Glad to help my friend
Love the Quakecon 2008 shirt! 2008 was my first year. 🙂
I think that was my first official year too. DC++!!! I haven't been since they started doing it again because they charge so much and there's no vendor expo. Maybe next year
Mercy, mercy, mercy, what a great how-to!
Always nice to meet a fellow who appreciates jazz music!
Great video btw....to everyone out there...as long as you can follow instructions...or pay attention to these vids...the install is fairly easy tbh....i just completed...my only regrets...i wish i would of bought the chrome accent versions...but i was on a budget...if you arent on a budget...id recommend buying the ones with chrome built in...my wife doesnt like them..lol..but i do...and now we can carry things on our long hauls and vacays..
Thanks! I got the black ones because I have a large travel unit that sits on them and the chrome ones would totally get scratched up by it.
@@CarolinaCowboys also..
Any recommendations for the small loose fit on the crossbars? Im experiencing the same thing..im kinda scared to overtighten...do you think i should just pick up some rubber washers?
@@04swiftstang I just kept cranking down on it and it eventually tightened up. You definitely don't want there to be any movement, and I wouldn't use rubber washers.
Thanks, for the helpful video. I just used it to install the rails on our 2020 Odyssey this past weekend. I think I was being overly cautious on the first one because it took 2 hours and then just a half hour on the second one.
Awesome, great job!
Super helpful, thank you!
You're welcome!
Thank you, great vid!!
You're welcome!
I did need to know what to do with the rubber grommets, many Thanks!
You bet!
Great video
Thanks!
Great video. Thank you very much!!!
Glad to help!
I'm going to be doing this next weekend on my 2019 Odyssey, I have everything I need parts wise and the installation manual. I'm not understanding the measurements for the cuts on page 3 of the manual, as far as where to start and end the different cut lines. Any tips?
All my tips are in the video, good luck!
Thanks for the video! family is expanding, and the forerunner is not going to be big enough anymore, so we’re looking at an Odyssey. But we want to be able to use our rooftop cargo carrier that we already have.
Thankfully the rooftop units have a standard mounting width so it shouldn't be a problem. If you're used to the Toyota's is there a reason why you wouldn't buy a Sienna?
@@CarolinaCowboys don’t like the hybrid
@@CarolinaCowboys I have the Yakima, crossbars and mounts, and the Yakima, CBX cargo carrier, so, they should be transferable to the Odyssey. The Yakima crossbars and mounts are a universal mount system.
@@johnmpifer Ahh that's a good reason
Thanks for the video and link. I'll wait until spring, but I'll be doing this with my 2020 Ody as well. Really irks me that the Ody's don't come with roof rails. On a minivan? They're pretty much required!
I know! But I think the reason is because they create wind drag and Honda couldn't claim the gas mileage numbers.
Hello, quick question for you. What should the distance between the rails be? I have a cross bar as well but I don't know if it will fit. Thank you
Everything is pre-drilled so make sure you are buying the OEM ones or it won't work.
This is a fantastic video, well prepared and well produced. Thank you for making it. Do you know if the 2022 odyssey roof rails and cross bars are the same as the 2018-2020 ones? thanks.
Hi, thanks for the comment, wow I can't believe the 2022 is already out, it looks identical to the 2021 model so it may work, but I haven't seen any of the documentation updated yet to know for sure.
@@CarolinaCowboys 21 and 22 are the same. I believe the only difference is the vacuum delete on the 22. Honda had some vac supplier issues in early 21 so they just deleted that option and called it a 22! That's why 22's were available in Jan '21. LOL
Thanks for the video, helped a lot with my install. However, my crossbars were missing the bolts, anyone know what size/length those are so I can find some replacements?
They are pretty specific bolts, have you contacted the place you bought it from? There should have been a plastic bag in the box.
@@CarolinaCowboys Thanks, and yes I'm contacting them, just wondering if I could shortcut and grab some equivalent from local HW store.
nice video! just curious why you don't like after market racks? I am look to haul kayaks...what do you recommend? thanks
OEM is usually high quality and guaranteed to fit right. I usually haul a lot of weight on top and the worst thing that could happen is something fails and everything goes flying off the back. I would suggest buying the OEM rack and bars then add a Kayak roof mount which will connect to the bars.
I'm considering buying an Odyssey and was curious about adding the roof rails. Great video, super helpful. Do you like the van, any issues?
So far the van has been great. The brakes are the biggest improvement.
The roof rails are a must for long trips to carry more cargo.
Can I ask you where you found the entire kit where together like that or, did you buy both main rails and cross rails at the same time so they just placed everything in the same box? Great vid and thank you so much for taking time out to do it at the risk of rude public comments, I found this to be helpful and informative so again, thanks so much for your efforts.
Hi Jeff, I found the kits on Amazon with the links I put in the description as well as on Ebay which was a little bit more risk. I ended up buying mine from ebay but I didn't like how they threw everything in one box scratching things up. If I did it again I would order them separately on Amazon.
Hi thanks for nice descriptive video. I installed both but cross bars has quite a bit of gap and moves side by side, I feel like it makes noise when I drive on bumpy road, anyone else faced this issue and any suggestion to take care of this issue would be highly appreciated.
You need to keep tightening the bolts until there's no more gap. It was extremely hard to turn the bolts and I was worried I was going to strip it but I eventually got it tight.
Carolina Cowboys appreciate your input, I was worried about stripping them as well, now it makes sense.
I have to tell you that leaving that sneeze in inspired this comment, a thumbs up, and a Subscribe. That's what it would look like if I shared my own TH-cam vids.
Good video btw (did this job 6 or so years ago and needed a refresher to do it again).
LOL, glad these are helpful and comments like this inspire me to make more videos!
Thank you!
You bet!
I like the idea of drilling out above the bolts. How would you know where the bolts are located?
I'm drawing a blank on this, I don't remember talking about drilling anything?
Thanks for the detailed video.. May I know where you bought the rails and the rack from?
Thank you! Please check the video description for links
Awesome video sir! Quick question, did the cuts give you more than enough trim for adjustments as far as in tucking it under the plastic?
Yes if you go to the section of the video where I'm cutting you will see how much extra I had
@@CarolinaCowboys thanks so much!
If i dont install the channels on the back part is that okay? Thanks
If you're talking about the rubber pieces it's not a big deal, it's all cosmetic, but if you're talking about the mounting parts you definitely need everything that has a bolt in place.
Did the torx botls to attach the cross bars come in the package? I am missing those so wondering if you bought those separately?
Doh! Nevermind. They were hiding behind some styrofoam... Thanks for the detailed video.
Good to hear
Do we worry about the water leaking about cut and re-install back the plastic pieces ?
I think that is mostly for looks.
Great step by step video! Where did you get that whole set up kit?
Thanks! Here's links to the parts crossbars (2018-2020) - amzn.to/2UtiBaQ and roof rails (2018-2020) - amzn.to/3cOseaj
Carolina Cowboys thank you very much!
Have you had any water getting into your rear cargo area after the install? Cheers
Not at all, have you had issues?
The description of the kit says it is to fit a 2018-2019 van, has anyone had any issues with the install being on a 2020?
It's the same 2018-2021
A man who wears socks with his thong sandals is to be trusted with installations like these. I will be tackling mine tonight with the same uniform!
HAHA! This is the way
thanks
Welcome
can you tell me how far apart the 2 crossbars are? i'm needing them on my 2020 Odyssey & i already have a Thule carrier so i want to make sure it will fit onto the crossbars
They are 29" to center of each bar. It seems there's a standard for all vehicles.
@@CarolinaCowboys even the dealer couldn't tell me that info! LOL! thanks!
@@CarolinaCowboys i have another question for you. my now 2 month old Odyssey seems to have a tire pressure problem. i am constantly putting air in the tires to keep them at 35 psi. as quickly as a day after adding air, the pressure will be down by 2-3 psi just sitting in the driveway. one day it was up by 3 psi just while sitting in the driveway. the dealer service rep told me it's due to the outside temperature fluctuations we have been having. have you experienced this issue?
@@usbatica23 Your tire pressure will go down alot when the seasons change and it starts getting cold outside. Just make sure you're airing them up when the tires are cold and not warm or they'll go down again.
Hi.. Loved the video.. What color is your odyssey?
It's Lunar Silver Metallic
The sneeze 😂
At least somebody watches my videos :-)
Very helpful, thanks. The biggest pain was taking off the part of the blue tape under the rail at the end. Recommend removing that right after the center supports are installed.
Great tip!
What is the spacing between the crossbars in this setup?
29" between the center of each bar
Are the cross bars only installed in a single fixed position?
Yes, pre-drilled for proper weight distribution.
I don't usually miss details like these, but I completely missed that our 2020 Odyssey didn't come with roof rails. What kind of minivan doesn't have roof rails? That's a requirement! Looks like I'll be headed down the same path as you.
You could argue it's because of fuel economy, but you could also argue it's a way for them to offer less and keep the same pricepoint.
Thank you and I have a question
Why were all four pieces in one box?
It was all separated inside the box, but that's the way it was shipped, I guess to save on cost as it was definitely a heavy box.
@@CarolinaCowboys thank you for your reply.
What was the weight of the box
@@ibrahimabdelwahab5253 If I had to guess, it'd say the box was 50 pounds.
Awesome video! Did the rails add any wind noise?
Not wind noise that I can hear but they do add drag so you'll take a small MPG hit
hi there i loved you movies , i like jazz too. i m jazz guy too)). would you help me to buy all part i m trying to check in ebay they looks like selling one by one parts , i want prity much all together. where i can buy it . i have 2012 honda odyssey. thanks.
Here you go for the 2012 amzn.to/2Ut3nCu and amzn.to/37eVIgm
Good Job thank for the video that simplified a lot of things :)
You're welcome!
Will this be the same for the 2022 model?
Should be the same
Great video! How are you liking your van so far? We are in the market and looking at an odyssey elite.
So far it's been great, we've already been on a few trips. The top things I like are the 10 speed transmission which helps on the long trips when you're going over hills it doesn't shake the whole van when downshifting, and the brakes are way better than previous years.
How much that cost you for the roof rails?
I paid $415 for a kit with both rails and crossbars. I included links in the video description but they are hard to come by right now.
Is this the same for the mdx?
It might be the same process, but I don't believe they share the same hardware
Man... everything went great until last crossbar. 2 of the holes for the bolts started spinning with the bolts so I could no longer tighten or back out the bolts. They are both for one side of the crossbar attachment. The 2 on the opposite side tightened just fine. I always thought there could be a chance that the bolt strips but didn't think the connector in the hole would be the problem. Not even sure how to address this as I don't want to return everything and start over.
Oh wow, yes it sounds like the welded nut on the inside of the housing broke off. All is not lost! I have a few ideas. If there is enough of a gap you can hack saw the bolt in half and let it fall on the inside, even if you can't hack saw the bolt you could drill out the head. But then use an expansion bolt instead which is a bolt that will expand inside and tighten it up good. Another option is you can leave those 2 bolts in place and then drive some self tapping screws in between the 2 bolts though it won't be pretty.
@@CarolinaCowboys I called the dealer I purchased from and they said bring it in to show them. I'm going to try that first and maybe a technician can help. I'm worried if I hack the bolt and let it fall inside, wouldn't it be moving around in there making all kinds of rattling noises? The dealer I purchased it from said for me to bring it in and show them the problem. Hopefully, they are willing to help me with the issue, since I'm calling it a defect on their part. Will keep you posted.
@@danhd.8313 ok if you bought it from a local dealer that’s good news, they would much rather help you get it fixed than return everything. Regarding the bolt, perhaps it would move some, you could always spray some expanding foam in there to fill the void.
@@CarolinaCowboys well...I ended up taking to dealer and they ended up replacing the entire right rail where the rivnut came loose. They said it was cross threaded and no easy way to get it out. And $200 bucks later I'm good to go. So for anyone attempting this...be careful and thread the bolts on carefully and take your time. Thanks for your help Cowboy!
@@danhd.8313 glad you got it taken care of!
Do you still own this van? We have been debating between a new odyssey or the sienna. Honda allows an 8 passenger in the elite trim, but Toyota limits the trim with an 8 passenger configuration. Thoughts?
Yes I still have it and it's great. But if you have tall people the Toyota has a lot more room in the back.
@@CarolinaCowboys thanks for the response. This will be a van that we bring to Germany with us for our next assignment and will travel all over Europe. I just want to make sure we have something reliable.
@@CrunchyBlack_386 Yes it will be reliable as long as you get the 10 speed transmission and not the 9 speed!
@@CarolinaCowboys Thanks for the response and help!
What website you order?
Link is in the video description
18 above? So mean 2022 would fit?
Yes it should be the same kit
3:55… was that a scorpion on the floor? Just curious…
LOL, so observant! That was a cobweb that was blowing in the wind. :-)
Why doesnt honda just ship it with the piecess pre cur?
I guess to keep the price down, or allow the dealership to charge more for installation
I would buy chrome ones
Would you be worried about it being scratched by things you put on top of the van?
The rails should be standard from the manufacturer.
Chrysler got that and the stow and go seats right
If only they could get the reliability right
FYI the installation is the same for the Odyssey 2011-2020, I cannot confirm if the roof rails have the same fitment, but the installation is the same.
My hope is that we won’t need our Yakima once we’re in our Odyssey.
I think you're still going to want to use it. Part of the issue is putting too much weight in the very back creates a weight distribution issue for vehicle handing, as well as very uneven wear on your rear tires.
well right now I have learned that the tailgate control module is fried and it might be water damage. It lives kind of down gradient from the roof channel on the drivers side and I had Honda stealership install the roof rack. I’m suspicious that the stealership installer damaged the sealant in that channel and water is getting inside. It’s a disgusting mess and I’m pretty unhappy.
Have you started looking for wet spots? It could be as simple as weather stripping. Or if they caused an issue, they may have drilled a hole in your roof, maybe they stripped one of the OEM holes, the only way to know is to take the roof rails back off to see.
$660 for labor. Ugghhh! I wish I had seen this video first!
Bummer!
nice job but personally I think is not worth it ... dealer install it for about 250.00 no hassle
$250 is money I can spend on something else
Hmm I’m going to let them do it for the money. I’ll screw it up.
It was definitely a bigger project than I anticipated. You might still be better off ordering the parts and paying a mechanic to do the install for you vs the dealership. Here's the links amzn.to/2UtiBaQ and amzn.to/3cOseaj
Were you paid by Honda to make it seem difficult? I did it without instructions 30 min each side with some tin snips.
Can you come help me with my projects?
Thanks! I ended up using tin snips also b/c of your comment. Took 1hr on the first side, then 45mins on the 2nd. Didn't use a tape measure on 2nd side either. Just placed the trim next to the mounting bolts and cut about 1" on either side. Really easy once you install the first side - you see what you're playing with. Tip for using tin snips: cut the bottom metal first, then bend it up and cut the top. This avoids smashing the channel.
@@roger3958 Exactly
@@CarolinaCowboys Thanks Again
Jesus christ that is involved for a common accessory.
It wasn't too bad :-)
@@CarolinaCowboys I'm about to do it on my 24 Odyssey. My 21 Highlander was a piece of cake by comparison.
Just show us and spare us the acting.
But I like to tell stories
nice job!!!
Thank you! Cheers!
Damn you rock. I just got my 2020 EX-L. going to do the same. Thanks for your video.
Good luck!
Thank you!
You're welcome!