Apparently it's just a ground wire so its fine to touch. The real problem here is him not tightening the nut enough. One gust of wind and that wire is disconnected
@@Sh4quille0atmeal you have no idea how much static charge builds in 15 minutes on those towers. If he touches that exposed bit before the wire he is toast.
Completely wrong, that's the bottom side of a cutout/switch, lightning arrestors are hardwired or clamped onto the energized lines and not connected through switches.
Padrão enel não usa terminar, como o cabo tem uma grande seção, e o conector ai do vídeo aperta de forma a distribuir o aperto por igual, se torna desnecessário o uso de terminal, fora que estamos falando do circuito primário, então a conexão dessa forma não gera resistência ou aquecimento devido a alta tensão.
I DPI sono sempre importanti anche se si lavora in assenza di tensione (in Italia non si può lavorare in tensione neanche sotto i mille Volt) in tutti i casi si tratta di una connessione a terra di uno scaricatore contro le sovratensioni da fulminazione atmosferica.
Que peligro , una tontería de esas puede causar una tragedia , la energía se respeta y más aún cuando es alto voltaje , creo que si fuera su jefe hace rato lo hubiese despedido , pues hasta yo saldría perjudicado por la falta de profesionalismo de ese empleado , se sanciona hasta la empresa a la que trabaje ,,, muy irresponsable , hay normas y hay que cumplirlas así sea un hilo hay que respetar los trabajos eléctricos
Questa si chiama messa a terra non fa niente se lo tocchi e solo per far scaricare la corrente a terra se ci sta qualche problema di fulmine oppure un guasto dispersivo o un colto circuito
The only way u did that was that everything was shut down and not energized. I use to work for a utility company 8 years ago and I know one damn thing OSHA would be up a utility company's butt hole if they caught u try to attach a wire with no rated gloves. Plus your General Foreman and Operations Coordinator be cussing u like a sailor and the Grid Manager himself. Lol😂
Maybe he has Calibrated fingers but still not enough torque.
Fingers went “click” as soon as the proper torque was applied
And his head went POP when they flipped on the switch 😅😅😂😂😂
Yup, looks tight enough, time to go
👍
He'll yea.. that thing was so tight it almost fell off when he let his hand off the wire
Needs an anti oxident at termination for dissimilar metals and weather exposure.
Yep
Ne donnez pas de bonne idée ça risquerait de leur apprendre des choses
Thought that was only used on aluminum wire?!
@@Weasel_NM575aluminum needs it everywhere no matter what
Bro wear gloves when it comes to hight power electricity even if power is 100% off just wear gloves , speaking from experience
yes
Apparently it's just a ground wire so its fine to touch. The real problem here is him not tightening the nut enough. One gust of wind and that wire is disconnected
@@Sh4quille0atmeal I think people need to remember that just because a video doesn’t show it doesn’t mean it didn’t happen after
@@Sh4quille0atmeal you have no idea how much static charge builds in 15 minutes on those towers. If he touches that exposed bit before the wire he is toast.
Not a expert, but just an educated guess? What if someone decides to turn on a generator, didn't turn off their Main?
This is a ground connect for the anti-lightning device, pretty safe to touch even if there is power
É uma chave fusível
i’m like that is not 13.8kV wire in any universe.
Completely wrong, that's the bottom side of a cutout/switch, lightning arrestors are hardwired or clamped onto the energized lines and not connected through switches.
Se aplicasse um terminal na extremidade desse cabo... Aí ficaria excelente 😊
Padrão enel não usa terminar, como o cabo tem uma grande seção, e o conector ai do vídeo aperta de forma a distribuir o aperto por igual, se torna desnecessário o uso de terminal, fora que estamos falando do circuito primário, então a conexão dessa forma não gera resistência ou aquecimento devido a alta tensão.
Guy is good ;-) yes its tight enough sir. Job well done. Have a weird feeling the wire is also live
The impact goes brrrttt
I believe he’s supposed to be wearing very thick rubber gloves
Insulate Gloves??
Neutral, basically don’t flow current. 😊
Guys just because a video doesn’t show someone doing what should be done doesn’t mean it wasn’t done after the video
Just natures way of thinning out the heard.
👍
Медь по алюминиевую плашку? Почему не наконечник алюмо-медный?
I DPI sono sempre importanti anche se si lavora in assenza di tensione (in Italia non si può lavorare in tensione neanche sotto i mille Volt) in tutti i casi si tratta di una connessione a terra di uno scaricatore contro le sovratensioni da fulminazione atmosferica.
Conexión a tierra de un pararrayos ( lightning arrester) polimérico ( para zonas salinas )
Anyway,That height still gave me thrill😬😬I'm proud of you bro,Without you guys ,we wouldn't have electricity 😬Good work sir
EPI deve estar em falta....
Great work❤
Thanks 🔥
Please tell me you did torque that termination... ?
Falta grave...no usar epp
ok
¿¿¿A ti mo te han enseñado que lo primero que hace uno cuando se levanta para ir a trabajar es ponerse los guantes??? 😅
WTF is this all about 😂
So he puts a wire into a cable clamp.then doesnt tighten it.
Clown if you ask me 😂
I think it's been over-torqued. I feel sorry for the guy who has to take that off.
This is when the eatables kick in. 😂
I dunno what it is about dem brown fingers, but they must have built in insulation!
Was there a missing glove on this hand or did you do it to get comments?
Oh no not to Torque Specs? WOW. Let’s see how long the transformer lasts?
Somebody tell him he doesn’t have to bend the wire like that
ok
Shop practice. PPE when in the bucket
This shocks me.
why?
Разве не нужно их гильзовать наконечники типа ншви?
No gloves? 😮
… and the gloves???
for video shoot
With no gloves? My oh my!
Я видел они автомобильные колеса тоже так закручивают! 🥴
Great you know how electricity works and make 150 a year we get bro you won!
Bro thinks he tightened it harder then a spanner
А ключом затянуть забыл?
Bzzzzt.
🤔🤔🤔
😉😉
Amostradinho ele. Sem luva.
real electrical workers wear voltage rated gloves, even when working on non-energized gear!
Yes they do
Cadê o episódio?
doing it HOT of course
Bizdeki malzemelerde neden böyle basit bir bağlantı çözümü olmadığını merak ediyorum.
Ele nao tem chaves e equipamento de protecao
Опрессовка должна быть
Que peligro , una tontería de esas puede causar una tragedia , la energía se respeta y más aún cuando es alto voltaje , creo que si fuera su jefe hace rato lo hubiese despedido , pues hasta yo saldría perjudicado por la falta de profesionalismo de ese empleado , se sanciona hasta la empresa a la que trabaje ,,, muy irresponsable , hay normas y hay que cumplirlas así sea un hilo hay que respetar los trabajos eléctricos
All the comments about correct torque, chill, mans got VERY strong fingers huh!?
yes😁. I have all tools. but i made this for video .
Bro's fingers made of plastic 😂
😉
Ils sont où les gants bordel😮😮
Bruh what is that 😂 should have made hook at the end and use wrench untill you can't no more
Where is the aderendhülse?
Globes are really tin, I can even see his nails
DEMITIDO!!! DESRESPEITOU A NORMAS DE SEGURANÇA .
Só faltou a luva!
Главное не затягивать гайку 😂, а то потом вызовов не будет
Или красным огоньком не будет сигнализировать о перегрузе
کار لذت بخش ولی خطرناکی ست
죽지는 않겠지만 안전을 무시하는 행동입니다.
절연 장비없이 안전거리 미확보로 천국행으로 갈수있습니다.
Наконечник то где?
just for video shoot
Bro use wagos instead
That’s not the handover a worker !! that soft with really nice nails not a worker
Desperate for Y.T. CLICKS???
Questa si chiama messa a terra non fa niente se lo tocchi e solo per far scaricare la corrente a terra se ci sta qualche problema di fulmine oppure un guasto dispersivo o un colto circuito
He ll use a wrench later he just put it in position lol
Scary
Look i know he is insulated but still not gona mess with 12kv
One for work and one for your wife.
🙄🙄
🤔
The only way u did that was that everything was shut down and not energized. I use to work for a utility company 8 years ago and I know one damn thing OSHA would be up a utility company's butt hole if they caught u try to attach a wire with no rated gloves. Plus your General Foreman and Operations Coordinator be cussing u like a sailor and the Grid Manager himself. Lol😂
😴😴😴
❤️❤️
Solo le falta al.video, que use guantes, seria más profecional...
I don't think that will hold
This is so wrong in so many ways. where did he train?
What no tork wrench😅
Perché usare i guanti, tanto siamo già troppi al mondo 😂
Hand gave it away
Someone is thinking of his wife and not his job.
Ground or not he still trippin doing it with no gloves
Je cherche du boulot comment on fait pour venir travailler là-bas?
Dont have a tools??
yes. but i take video for fun .
yes. but i take video for fun .
No hay energía vivo es quiere aparentar otra cosa
Tudo desligado
Torqued to spec. Next!
Oiii
Люди шоб ви понімали це заземлення, і до нього можна торкатись геть під напругою в 10 тисяч кВ.
😱🤌🏿
Ah why isn't he or she is not wearing gloves.omg.
Too much copper on show there.
Может ещё зубами затянешь, а я включу фазу
that'll break soon
should've put other side too
Abay tight to kr na 😂
EPI
Put your gloves on
Zé faísca...nem luva de vaqueta esse Zé RUELA usa
ok
Finger tight. 😂
O peão fica com ss mãos ocupadas maid preocupado em segurar o celular para filmar a 💩 que está fazendo.
아 좀 맨손으로 하지마
ok. next time I used tools
Handfest reicht😂😂