I went and bought two Saitek throttle units just so I can get these along with the flaps and spoiler handles. I put my order in with cockpitsimparts on Sunday. They look great! Nice job Sam! Can't wait to receive them.
a thin black perminent marker should make the decals visible. also i would advise that to angle it 45 degrees from the table so full throttle is further forward like in the real 737
Hi Damon, thanks for the tip, i think this will work, i will give it a try in some point. i also agree with the 45 degrees angle, this will give it more realistic feel.
it is up to you mate, i don't know when i am going to make start with the other ones yet, and also, i don't know how much will cost as i will need to workout how much marital and time will it take to build. so, the decision is your !:)
hi RangaNadz, not with this set, but i am thinking maybe in few months i might release one which have all the wires and switches to work, but even with that you will still need to dismantle your throttle to link the wires to the Saitek switches, not sure yet.
Good evening, I'd like to know how to wire up all the stuff. Could you please explain me somehow how to do that? (I've ordered the complete set yesterday😁)
@@semhage1951 actually Sam told me that if I knew how to do it, it would have been an easy job. Since I don't know how to wire up all the switches... I didn't get a proper answer😂
Hi, thanks for you comments, the Decals are engraved on the handles, not sure if you can see them from the video, the only problem i have here is figuring out how to paint the engraved parts!! not sure yet :) if you like, visit my website cockpitsimparts.co.uk and look for the throttles handles and you should see them clearer. let me know if you need any help thanks Sam.
Hi I don't get these products. Say I bought this lever and put it in my saitek throttle would the throttles work like if I use these will it work for fsx
hi, no unfortunately, thy are fake, it could be done but it means the buyer will have to dismantle the throttle to run the cables and wire them up to the Saitek switches. !! big job!
hi mate, i dont have the CH throttles at the moment, otherwise i would have come up with something for them, i have to have the CH throttles so i can take measurements and so on, maybe one day. sorry.
Hi; This is my second response to your video..I didn't see any DECALS, on the throttles or ,spoilers or flaps..Does the kit have the decals on them? Thank you, gerard1011
Hmm I think i might have to invest in summet like this. actually i found you on Ebay so but I want the Saitek quadrent and those levers like in the video at some point.
Hi Mate, thank you for letting me know, we are changing servers at the moment, it should be back online by the end of the day hopefully. if you need any help at all just send me an email via youtube for now. thanks
Hi mate, unfortunately they are fake, its only to simulate the actions and add a bit more realism to the experience. however, i am still thinking about a way of getting a package that would transform the Saitek TQ in to a fully functional unit. hopefully in the upcoming months. (not sure how will that work but lets see how it goes. ) thanks
I have tried to contact you via the link in the mail you send me, and also via your website. But I get this error message. "An error occurred during a connection to (your web address) SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long)"
few questions- 1. what is the actual point for these if they dont work with fsx and if they are fake 2. how do you attach them to the throttle quadrant 3. how hard and what would i have to do to connect the wires so it is compatible with fsx- full detail please on this question Have to admit thought they do look cool
hi chris, the point of those addons is just to give the Saitek better look and more realistic feel, it will be really difficult to add fully working switches to this product as there is not much room inside the handles to run the wires, we are thinking to bring out fully working ones hopefully in the upcoming months.
I went and bought two Saitek throttle units just so I can get these along with the flaps and spoiler handles. I put my order in with cockpitsimparts on Sunday. They look great! Nice job Sam! Can't wait to receive them.
a thin black perminent marker should make the decals visible. also i would advise that to angle it 45 degrees from the table so full throttle is further forward like in the real 737
Hi Damon, thanks for the tip, i think this will work, i will give it a try in some point. i also agree with the 45 degrees angle, this will give it more realistic feel.
Is the connection cable present in the product?
it is up to you mate, i don't know when i am going to make start with the other ones yet, and also, i don't know how much will cost as i will need to workout how much marital and time will it take to build. so, the decision is your !:)
hi RangaNadz,
not with this set, but i am thinking maybe in few months i might release one which have all the wires and switches to work, but even with that you will still need to dismantle your throttle to link the wires to the Saitek switches, not sure yet.
hi mate,
not at the moment unfortunately, but hopefully soon. thanks
Hi mate,
i am hopping to get them released by tomorrow hopefully, i am working on the final touches as we speak. thanks
is there a wire channel for the ap disconnect switches?
Good evening, I'd like to know how to wire up all the stuff. Could you please explain me somehow how to do that? (I've ordered the complete set yesterday😁)
Ricky717Captain Official I have the same question, did you get an answer?
If yes how do you do it?
@@semhage1951 actually Sam told me that if I knew how to do it, it would have been an easy job. Since I don't know how to wire up all the switches...
I didn't get a proper answer😂
Hello. How would you wire this up so the buttons work. Amazing work btw :)
Hi, Bessam! Why you suppose to stop selling the handels for Saitek? I found this information on your site
Hi, thanks for you comments, the Decals are engraved on the handles, not sure if you can see them from the video, the only problem i have here is figuring out how to paint the engraved parts!! not sure yet :)
if you like, visit my website cockpitsimparts.co.uk and look for the throttles handles and you should see them clearer.
let me know if you need any help
thanks
Sam.
hi,
the Saitek Throttle Levers ( Pro Edition ) available to order now from my website. any inquiry please let me know.
i look forward to speak to you. thanks mate.
I'll just try later. I might have a solution for the "problem" we have discussed.
Can the reverse levers actually be set to engage r/thrust?
And if not how much it would be in dollars thanks?
Hi I don't get these products. Say I bought this lever and put it in my saitek throttle would the throttles work like if I use these will it work for fsx
MusicHD ur dumb
I followed up on the email I recently sent you about the competition. Not heard back yet so just checking in.
do the reverse thrusters work?
Nice Levers but it's only handles or it's an all in one ? i mean with the saitek throttles
hi,
no unfortunately, thy are fake, it could be done but it means the buyer will have to dismantle the throttle to run the cables and wire them up to the Saitek switches. !! big job!
hi mate,
i dont have the CH throttles at the moment, otherwise i would have come up with something for them, i have to have the CH throttles so i can take measurements and so on, maybe one day. sorry.
Hi; This is my second response to your video..I didn't see any DECALS, on the throttles or ,spoilers or flaps..Does the kit have the decals on them?
Thank you, gerard1011
how to update this and how to get it ?
Hmm I think i might have to invest in summet like this. actually i found you on Ebay so but I want the Saitek quadrent and those levers like in the video at some point.
Hi, do you ship to the USA?
Hi Mate,
thank you for letting me know, we are changing servers at the moment, it should be back online by the end of the day hopefully. if you need any help at all just send me an email via youtube for now.
thanks
Hi mate,
unfortunately they are fake, its only to simulate the actions and add a bit more realism to the experience.
however, i am still thinking about a way of getting a package that would transform the Saitek TQ in to a fully functional unit. hopefully in the upcoming months. (not sure how will that work but lets see how it goes. )
thanks
if I want this product, what i have to buy? (I Want gray edition)
It's compatible with FSX?
Reply me soon
I have tried to contact you via the link in the mail you send me, and also via your website. But I get this error message. "An error occurred during a connection to (your web address)
SSL received a record that exceeded the maximum permissible length.
(Error code: ssl_error_rx_record_too_long)"
few questions-
1. what is the actual point for these if they dont work with fsx and if they are fake
2. how do you attach them to the throttle quadrant
3. how hard and what would i have to do to connect the wires so it is compatible with fsx- full detail please on this question
Have to admit thought they do look cool
hi chris, the point of those addons is just to give the Saitek better look and more realistic feel,
it will be really difficult to add fully working switches to this product as there is not much room inside the handles to run the wires, we are thinking to bring out fully working ones hopefully in the upcoming months.
Is there a demo one you don't use that you could give away for free? I am a huge fan of the boing 737 please
Nice