Screw it, ordering a tape core right now. I already have the Atlantic(which still makes me grin every day) but this editor makes the tape core even more useful. I was already buying the Roctary but I may as well get a tape core too because I will eventually anyway. NuX have been killing it in recent years. I don't know if the story about Strymon engineers going to work there is true but either way they're putting great gear out.
Well. It’s three years later, not sure if you care about the answer anymore, but yes you can. At least in a way. The mix control doesn’t affect the reverb. So you can set it full counter clockwise, killing the delay signal, and then whatever reverb setting you had it at will come thru. So you have no control over the reverb itself on the pedal when not connected to a computer, but yeah you can have reverb only by killing the delay mix.
Nothing is going to replace the boss RE-20. both the boss RE-20 space echo stomp and the nux tape core are their own separate entities, and special for different reasons. 👌
Can I change the expression pedal function to mix (wet/dry)? I want a delay that can provide a momentary (via expression pedal or not) delay to highlight only a certain chord or note while I press it down; have any ideas?
you could replace the foot switch with some sort of momentary switch on a delay pedal that has trails (continues until fades), or hard stop. Lots of modelling amps have the ability. Check out the Electro-Harmonix "Memory" man, boy, toy series of pedals, also line 6 delays. This type of feature is available on larger more expensive pedals in most cases, so it's probably a lot cheaper to DIY by modding a cheap/used pedal with a momentary switch button.
ZombiePantsYT Thanks man! By now I already figured out that I can make a loop pedal with both momentary and latch switches and have the delay always on plugged in. Doing that way I keep my pedal intact and can also control other l effects with the momentary switch If I hadn't come with that ideia before, your comment would certainly trigger the same ideia! So thanks a lot!
If I build the loop to have the loop output always on and bypass the input signal while off, I believe it's possible to use even analog effects since they will be always on... I will try it! If I get it to work I'll send a demo of it
Hello NUX people, I'm having trouble with the T-Lock forgetting my settings when I power down my pedalboard. Every time I power up I have to re-do my settings, and no presets are saved. This one aspect is very annoying, otherwise a brilliant pedal. Do you have a solution?
Hi Nux people, I want to buy a Nux tape core. I like to know if I use the editor is there's a midi learn function on it? I like to use it with my synth or midi keyboard and it would be nice if I can control the editor from my synth or midikeyboard and not with a mouse. If not can you make it possible in the next update?
Vigilius60 I read elsewhere that via tap tempo ( and the editor?) it can get 1500ms, it's just limited from the dial on the pedal. As information from Nux is so vague it's hard to know.
I think I'm being dense here and need to re view the video. I think I understand that you can download the editor off the Nux site and plug your device into the pedal. This then gives you access to parameters not available off the pedal itself. Are these then saved? Just in the tone lock? Just to the whole pedal? Or can you adjust and save each of the 7 delay types on the big knob?
Hello Philip, we're sorry to make you confused. Cause the real Tape Echo delay time is less than 600ms, we set the pedal initial status as close as a real Tape Echo machine. For the Tape Core Editor, you could save all the parameter into the pedal. For example, you could adjust different retro head combinations with different notes into the 7 delay type presets and stored. Even you exit the Core Editor, it's stored and you could use it as you want.
After you update the firmware and use the Core Editor to engage "smart tap tempo" (auto tap), you could set the maximum delay time to 1500ms.(That's the maximum memory of Tape Core dlx.) But if you tweak the real time knob, the maximum will be less than 600ms, the reason is we want to make the special pitch shift effect as the real Tape Echo while you tweak the time knob instantly to minimum.
I'm trying to get the device connected on my mac computer, but it just refuses to work...i tried many cables, and two computers. I'm unplugging everything, plugging the USB cable, pressing the foot switch, powering the device. My computer won't see it :( Both the app and the updater. Any ideas anyone ?
On my mid-2015 Mac mini running OS Monterey ver. 12.5.1, I am able to save all settings into the pedal. (Power up the pedal connected via USB before starting the Editor software. To save the revised settings click the software SAVE button near the Selector. Then name the file and save that version to whatever folder on your computer. The same settings -- all 7 sets of them, one for each position on the software's SELECTOR switch -- will also be saved on the pedal. N.B. You can't just save one SELECTOR setting at a time. When finished, disconnect the pedal from the USB cable and close the Editor.) Note that, at least in my case, the revised settings do not appear to be alterable with the real knobs once the pedal is on my pedalboard and no longer connected to the computer. Easily changed back to factory settings with the Editor's RESET button, but it takes some back and forth between pedalboard and computer - saved as a number of presets -- for me to fine tune the settings.
I spent hours trying to figure this, I bet you're on a mac? I'm on a mac but I downloaded the Win s/w, extracted the .bin and the mac DFU s/w can read this, everything works after that.
You need to turn off the device and unplug EVERYTHING. Then hold down the main footswitch, POWER IT UP, and make sure its connected to the PC, then in the fireware program upload the file and it should recognize the device
By far the best Echo FX review I have ever seen on TH-cam. Thanks!
Screw it, ordering a tape core right now. I already have the Atlantic(which still makes me grin every day) but this editor makes the tape core even more useful. I was already buying the Roctary but I may as well get a tape core too because I will eventually anyway. NuX have been killing it in recent years. I don't know if the story about Strymon engineers going to work there is true but either way they're putting great gear out.
Can you make a preset with reverb only? Thank you.
Well. It’s three years later, not sure if you care about the answer anymore, but yes you can. At least in a way. The mix control doesn’t affect the reverb. So you can set it full counter clockwise, killing the delay signal, and then whatever reverb setting you had it at will come thru. So you have no control over the reverb itself on the pedal when not connected to a computer, but yeah you can have reverb only by killing the delay mix.
Wow, this guys of nux are killing it! This is a great way to replace the Boss Re-20. They have to create a digitech Whammy clone
Nothing is going to replace the boss RE-20. both the boss RE-20 space echo stomp and the nux tape core are their own separate entities, and special for different reasons. 👌
for anything
mic,bass,records,drum,effects
a will try for bass,and dark trap
or synth ( stereo ) and voice together
DIGGGGGGGGGGGGGGGGGGGG
Can I change the expression pedal function to mix (wet/dry)?
I want a delay that can provide a momentary (via expression pedal or not) delay to highlight only a certain chord or note while I press it down; have any ideas?
you could replace the foot switch with some sort of momentary switch on a delay pedal that has trails (continues until fades), or hard stop. Lots of modelling amps have the ability. Check out the Electro-Harmonix "Memory" man, boy, toy series of pedals, also line 6 delays. This type of feature is available on larger more expensive pedals in most cases, so it's probably a lot cheaper to DIY by modding a cheap/used pedal with a momentary switch button.
ZombiePantsYT Thanks man! By now I already figured out that I can make a loop pedal with both momentary and latch switches and have the delay always on plugged in. Doing that way I keep my pedal intact and can also control other l effects with the momentary switch
If I hadn't come with that ideia before, your comment would certainly trigger the same ideia! So thanks a lot!
If I build the loop to have the loop output always on and bypass the input signal while off, I believe it's possible to use even analog effects since they will be always on... I will try it! If I get it to work I'll send a demo of it
The dd-20 can do this. You just need an external momentary switch. You can hook it up to the expression jack and assign the function to on/off.
redworm03 good! thank you man!
Does anyone knows how to save the setting from the editor to the nux ? Thnks
What is the "auto tap" setting in this software editor?
Guess I can't sue anybody around here for brain damage! Great video. Great pedal!
BASS player here, awsome music and playing, man,
cannot find the editor anywhere on the net!!!! HHEEEELLLLPPP!!! Thank you.
www.nuxefx.com/tape-core-deluxe.html bottom of the page
Hello NUX people, I'm having trouble with the T-Lock forgetting my settings when I power down my pedalboard. Every time I power up I have to re-do my settings, and no presets are saved. This one aspect is very annoying, otherwise a brilliant pedal. Do you have a solution?
I dont hear any dif on sound when i change flutter or saturation. The other controls work well.
Why not release the additional 90% and demo it in stereo?
Does it do ping-pong in stereo mode?
You're using computer drums. So how did you sync the pedal with the BPM?
The hardware has tap tempo function.
Hi Nux people, I want to buy a Nux tape core. I like to know if I use the editor is there's a midi learn function on it? I like to use it with my synth or midi keyboard and it would be nice if I can control the editor from my synth or midikeyboard and not with a mouse. If not can you make it possible in the next update?
I don't think there is
Mike, have any presets to share?
The manual says that the longest time is less than 600 ms. but it seems to me to hear some longer delay...
Vigilius60 I read elsewhere that via tap tempo ( and the editor?) it can get 1500ms, it's just limited from the dial on the pedal. As information from Nux is so vague it's hard to know.
I think I'm being dense here and need to re view the video. I think I understand that you can download the editor off the Nux site and plug your device into the pedal. This then gives you access to parameters not available off the pedal itself. Are these then saved? Just in the tone lock? Just to the whole pedal? Or can you adjust and save each of the 7 delay types on the big knob?
Thanks and you are right: information from NUX are really too vague!
Hello Philip, we're sorry to make you confused. Cause the real Tape Echo delay time is less than 600ms, we set the pedal initial status as close as a real Tape Echo machine. For the Tape Core Editor, you could save all the parameter into the pedal. For example, you could adjust different retro head combinations with different notes into the 7 delay type presets and stored. Even you exit the Core Editor, it's stored and you could use it as you want.
After you update the firmware and use the Core Editor to engage "smart tap tempo" (auto tap), you could set the maximum delay time to 1500ms.(That's the maximum memory of Tape Core dlx.) But if you tweak the real time knob, the maximum will be less than 600ms, the reason is we want to make the special pitch shift effect as the real Tape Echo while you tweak the time knob instantly to minimum.
Hi everybody... I would like to use a bit of Reverb, just like the Rolland Echo... is it possible using this pedal or is it solely an "echo"?
It has Reverb! Just use the Editor AND you can select which of the seven positions you want the Reverb on.
I'm trying to get the device connected on my mac computer, but it just refuses to work...i tried many cables, and two computers. I'm unplugging everything, plugging the USB cable, pressing the foot switch, powering the device. My computer won't see it :( Both the app and the updater. Any ideas anyone ?
Same problem and the firmware says device not detected
Let me know if you solved it
@@davepowell4740 i gave up XD ;)
The sounds tweeked in the editor can't be stored in the pedal, so live they can't be used. Time, Mix and repeat are not stored in the editor...
Actually no! You can save the settings made via software into the pedal.
On my mid-2015 Mac mini running OS Monterey ver. 12.5.1, I am able to save all settings into the pedal. (Power up the pedal connected via USB before starting the Editor software. To save the revised settings click the software SAVE button near the Selector. Then name the file and save that version to whatever folder on your computer. The same settings -- all 7 sets of them, one for each position on the software's SELECTOR switch -- will also be saved on the pedal. N.B. You can't just save one SELECTOR setting at a time. When finished, disconnect the pedal from the USB cable and close the Editor.) Note that, at least in my case, the revised settings do not appear to be alterable with the real knobs once the pedal is on my pedalboard and no longer connected to the computer. Easily changed back to factory settings with the Editor's RESET button, but it takes some back and forth between pedalboard and computer - saved as a number of presets -- for me to fine tune the settings.
@@sirchtheworld Wait, you can't change the time mix and repeats with the knobs after? That doesn't seem right.?
Hi,
can I use the Pedal as a plugin inside the DAW when connected?
Thx and Greetings
yes, if you send the output of the track and pass through the pedal and insert again on your audio interface.
No BPM tempo in the editor?
Hi. I have already made the firmware update via DFU mode. But the editor says "disconnected" all the time. What am I doing wrong ?
I'm having the same issue. Did you ever figure this out?
Scott Kaszyk not yet...only worked with other newer os
I spent hours trying to figure this, I bet you're on a mac? I'm on a mac but I downloaded the Win s/w, extracted the .bin and the mac DFU s/w can read this, everything works after that.
You need to turn off the device and unplug EVERYTHING. Then hold down the main footswitch, POWER IT UP, and make sure its connected to the PC, then in the fireware program upload the file and it should recognize the device
@@Clive007 Thanks for the info; sorted the problem after multiple attempts last night. Great nugget of wisdom! 🙌🙌🙌
bebop ? why not ?