You're a star matey, I hope you don't mind that I gave your face book page a shout out, as it's sooo helpfully especially when someone needs help with the manticore 😊. Thanks as always mate. 😊👍
New subscriber, thank you for sharing these settings. I will give them a try and see how they do. I mostly hunt parks. I like your ferrous limits settings, I ran the 900 at 0 ferrous all the time and it unmasked brilliantly. 👍👍👍
Ancient small gold can come in below 4...if you ground balance manually u can actually run the sensitivity higher...the stabiliser actually reduces depth and clarity of signal...ive had mine since last April and have found just about everything...far better than the Nox 800 i had for four years before, i tend to use sensitivity 26 or slightly higher if ground allows...the M9 coil is better in heavy iron and i use recovery 6 always.... Cheers Steve
Steve, so that I understand what you are saying, if the factory setting for stabilizer is 1, you are saying that decreases depth? I ask this because I am struggling with getting depth out of my Manticore. Thank you for your comment above.
The stabilizer is not a filter, which reduces depth or anything else. It's specific purpose is to reduce false signals. Have you tried, increasing sensitivity, then upping the stabilizer, as long as the field isn't to chattery?
Thanks for sharing 👍 on the normal audio theme are the threshold level 0 pitch 8 profile simple that’s what’s on mine not sure if it’s right or makes a difference cheers 👍
The only bit I'm not sure about in the US is the ground balance. UK and most European countries it's normally OK to run at zero, but I think that the US is more mineralised, so I think you'll need to ground balance. Thanks for watching 👀
![ILLSLICK X YOUNGOHM - We're The same [Official Video]](http://i.ytimg.com/vi/yUJNkobYR0E/mqdefault.jpg)
![NISAMANEE - TADA (ท้าดา) [ OFFICIAL MV ]](http://i.ytimg.com/vi/hcQHEPMmJpU/mqdefault.jpg)
Well done Henry nice & informative video 👍👏👏👏
Thanks Mark! 👍😊
Thanks for sharing Griff! Appreciate it.
No worries, thanks for watching 👍😊
Brilliant as always mate 👍 great clear instructions there and very helpful for all Manticore users 👌.
Well done mate 👏
You're a star matey, I hope you don't mind that I gave your face book page a shout out, as it's sooo helpfully especially when someone needs help with the manticore 😊. Thanks as always mate. 😊👍
@GRIFFINds of course mate, it's fine 😊❤️
On ancient land bud i was just notch 0-2 out up to 4 you can miss small gold and small saxons depending on soil conditions 👌
New subscriber, thank you for sharing these settings. I will give them a try and see how they do. I mostly hunt parks. I like your ferrous limits settings, I ran the 900 at 0 ferrous all the time and it unmasked brilliantly. 👍👍👍
Excellent I hope these help. 👍👍👍
Thanks for sharing
No worries, thank you for watching 😊👍
Ancient small gold can come in below 4...if you ground balance manually u can actually run the sensitivity higher...the stabiliser actually reduces depth and clarity of signal...ive had mine since last April and have found just about everything...far better than the Nox 800 i had for four years before, i tend to use sensitivity 26 or slightly higher if ground allows...the M9 coil is better in heavy iron and i use recovery 6 always.... Cheers Steve
Steve, so that I understand what you are saying, if the factory setting for stabilizer is 1, you are saying that decreases depth? I ask this because I am struggling with getting depth out of my Manticore. Thank you for your comment above.
The stabilizer is not a filter, which reduces depth or anything else. It's specific purpose is to reduce false signals. Have you tried, increasing sensitivity, then upping the stabilizer, as long as the field isn't to chattery?
Nice one Henry 🦘🦘😁👍
Thanks Andrew 👍👍😊
Nice one Henry I’ll give it a try 👍 shaune in Kent 👍👍
Cheers Shaun, give it a try let me know how you got on 👍😁
Hello in from bulgaria, here land is high mineralization, any recomendations? Do you know how to turn off sounds for Foil? Thanks for video
Thanks for sharing 👍 on the normal audio theme are the threshold level 0 pitch 8 profile simple that’s what’s on mine not sure if it’s right or makes a difference cheers 👍
Yes its the factory setting and it's the same I believe. Thanks for watching 👀
@@GRIFFINds cheers 👍
How does this it work in the US or other parts of the world ?
The only bit I'm not sure about in the US is the ground balance. UK and most European countries it's normally OK to run at zero, but I think that the US is more mineralised, so I think you'll need to ground balance. Thanks for watching 👀