Removing airbag to replace steering wheel trim on 2008-2012 Honda Accord

The tools you will need to complete the job are a flat head screw driver and a Philip head screwdriver T30 Torx bit socket and ratchet.

[@Mushroomhaus0001]

Thanks man. This was super helpful. Doing the same to mine because my trim pieces broke and wore out through the years. The OEM ones have an awful coating on them that peeled off after a few years.

[@ancalin7076]

Usually battery only needs 3 or 4 minutes after disconnected to discharge all the power but if you didn't want an air bag to accidentally blow into your face then mightve waited for as long as you can.

[@xaviersneary3621]

thanks for making this vid! super easy to follow

[@gogetit3222]

Just wanna make sure but when ur done u just put everything back together and then connect the battery back up right

[@JN-mk2fh]

Nice video, and thanks for making it. How does the airbag come off the cover to replace the chrome Honda badge?

[@nasseranise102]

Thats hard to do tbh. U can get one from ebay to cover the original one up the original one and they look nicer tbh.

[@brendongaff2054]

I myself undo the battery then turn the lights on so I can remove the airbag right then instead of waiting...never a problem after about 25 or so removed

[@aaronchan9624]

Juan thanks for the video! i was just trying to do this myself, but that those two T30 screws from left/right side were so damn tight... i couldn't take them out at all. how did yours come off so easily? you didn't seem to need much effort at all to unscrew those...

[@wreckagevic]

Does your steering column make the pop sound when you make turns? It’s a known issue but they haven’t made a recall.

[@dailychillvibe6012]

Hello Juan. If I want to remove completely the steering wheel. which screw should I take out ?

[@nasseranise102]

Just the one in the middle. I think its 13MM

[@anthonyparamo615]

You use 1/4 ratchet or 3/8 ratchet?

[@JonathanSanchez-eh3bb]

Would this work for 09-14 Acura TSX?