ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Wireless Job Link Probes & Test Kit Use to Check a Refrigerant Charge!
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2018
- In This HVACR Training Video, I show how to Use the Fieldpiece Wireless Job Link System Charge and Air Test Kit in order to check a Refrigerant Charge. Always make sure to turn on the temp and pressure probes along with the psychrometers before connecting them to the system in order to check the calibration in the Job Link App. Supervision is needed by a licensed HVACR Tech while doing this as Experience and Apprenticeship garners Wisdom and Safety.
Tools Used In The Video
Fieldpiece Wireless 6 Piece Job Link System Charge and Air Test Kit JL3KH6- amzn.to/2wr4Xbp
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our HVACR Educational Books, E-Books, Workbooks, Cards, Posters, and PowerPoints:
All Our Educational Products on Our Site: www.acservicet...
All Our Educational Products on Amazon: amzn.to/48pDd82
Mini Split Book and E-Book on Our Site- www.acservicet...
Mini Split Paperback on Amazon- amzn.to/3ytHJSs
Mini Split Paperback on TruTech Tools- www.trutechtoo...
Refrigerant Charging Book and E-Book: www.acservicet...
Refrigerant Charging Paperback on Amazon: amzn.to/46xTeHf
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our HVACR Online Resources!
Our HVAC Calculators: www.acservicet...
Our Newest Articles: www.acservicet...
Try our HVAC/R Quizzes! www.acservicet...
Our Other Resources: www.acservicet...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Tools Used in Our Videos!
Tool Links on Our Site: www.acservicet...
Our Tool List on Amazon: www.amazon.com...
Support the Channel by purchasing tools through TruTech Tools!
Use this link www.trutechtoo...
Save 8% at checkout using code "acservicetech"
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Follow Us On Our Social Media & Podcasting Channels!
Patreon: / acservicetech
Facebook: / acservicetech
Instagram: / acservicetech
X: / acservicetech
LinkedIn: / ac-service-tech-llc
Tiktok: / acservicetech
Spotify: open.spotify.c...
Apple Podcasts: podcasts.apple...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
⚠️ Disclaimer:
Information in this video is intended for educational purposes only. Any work related to the topics in this video should be performed by licensed technicians or by apprentices under the supervision of licensed technicians. AC Service Tech LLC is not responsible for any possible damages or injuries caused by the use or misuse of any information provided. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#hvacr #hvacr #hvactrainingvideos #hvactraining #hvactraining101 #acservice #acservicetech #fieldpiece #joblink #charge #air #testkit #refrigerant #probes #psychrometers #psychrometer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Shop through Amazon! Your Purchases through Amazon provide a means for channels such as mine to earn advertising fees from all purchases after clicking through. Prices are the same as normal.
Tool List- www.amazon.com/shop/acservicetech
Support- www.patreon.com/acservicetech
For those that are looking for the tools used in the videos: (Linked Below)
Fieldpiece Wireless 6 Piece Job Link System Charge and Air Test Kit JL3KH6- amzn.to/2wr4Xbp
Here is the Fieldpiece SMAN460 Digital Manifold Set- amzn.to/2nB4Fe6
Here is the Fieldpiece SMAN360 Digital Manifold Set- amzn.to/2BdoaD4
Here is a link to Refrigerant hoses with valves used in the videos amzn.to/2aBumVI
Here is the Link for the Yellow Jacket Refrigerant Manifold Gauge Set used in the videos amzn.to/2aenwTq
Here is the Yellow Jacket Manifold Gauge Set including standard hoses- amzn.to/2vLVkV9
Here is the Yellow Jacket 4 Port Brute Manifold with Hoses- amzn.to/2BkuGIq
Here is the Compact Ball Valve Attachment for the end of the Refrigerant Hose- amzn.to/2KUisW8
Here is the Quick Disconnect 90 degree attachment for the end of the refrigerant hose- amzn.to/2MMtVcg
Here is the link to the Appion Valve Core Removal Tool- amzn.to/2uYr8WL
Here is a link to the JB 6 CFM Vacuum Pump amzn.to/2nqbvo8
Here is the Link to the Appion Blue 3/8" to 1/4" Vacuum Hose- amzn.to/2uYlVyc
Here is the Link to the Appion Red 3/8" to 1/4" Vacuum Hose- amzn.to/2uYg6Ro
Here is the link to the Yellow Jacket 1/4" by 1/4" heavy duty hose straight- amzn.to/2umtcod
Here is the link to the CPS Vacuum Micron Gauge- amzn.to/2v1nM3O
Here is a link for RectorSeal Bubble Gas Leak Detector amzn.to/2ckWACn
Here is the link to the Fieldpiece ST4 Dual Temp Meter- amzn.to/2wc1ME3
Here is a link the Nitrogen Regulator amzn.to/2bXdR5f
Here is a link to the Nitrogen Flow Meter amzn.to/2brvoBg
Here is a link to the Digital Refrigerant Scale used amzn.to/2b9oXYl
Other tool links can be found in the video description section.
Shop through Amazon! Your Purchases through Amazon provide a means for channels such as mine to earn advertising fees from all purchases after clicking through. Prices are the same as normal- www.amazon.com/shop/acservicetech
All of the ACSERVICETECH Playlists- th-cam.com/channels/OZR-1IqsAer9wzlvFgb4mA.htmlplaylists?view_as=public
What type of gloves are you using in this video to protect your hands from potential liquid refrigerant burns?
I’ve been contemplating purchasing job link but after watching your video I’ve placed my order. Your channel is invaluable to me as a source of education
Just bought this kit today. Cant wait to use it on my maintenances vs lugging around my sman480 manifold
How is that going ?
That's amazing all the info is right there for you, and you can proceed based on the results. Thanks for the info and demo!
Thanks Running Coyote!
Great presentation. I have been waiting so long for something like this tool to come out. Thank You!
Great explanation Craig, I just bought the job link probes & was researching how to set them up and what the interface looks like and went straight to your channel 👍
Amigo muy Buenos videos ,muy profecional y muy bien explicados tus videos. Muy educados y precisos. Al grano sin tanto royo y facil deventender
Easy to understand with no BS thanks
What... first the digitals and now the wireless smart probes. Lol. I always turn to your videos for training and I am so glad you started using the digital gauges. I really like the digital equipment a lot better. Thanks for posting!!
Danny, thanks for letting me know!
Best refrigerant tools ever
Excellent tutorial !!
I like ur teaching thx for all the work
Would you please add a link for the actual T-valve you used in this video demonstration?
Love the way you explain what you're thinking point by point. Best instruction possible! Thanks! [Makes me salivate when I see the new Fieldpiece gauge set!]
Thank you very much for letting me know Brian!
My coach, health your hand and your effor. İt has been so much nice an working 👏👏🧿🧿
I discovered your range of tooling through the internet exactly on the youtube HVACR videos, it's great, I the tools that I wish I bought later is Fieldpiece, it's very good !!, Aziz from ALGERIA.
Thanks a lot Aziz!
Use Measure Quick with the Probes ! You won't be disappointed !
Another great video sr. Great expectations
Glad you like them!
As of 7/2023 Fieldpiece tech support is very poor, they have new guys that don’t know how to teach you how to use this setup. Best to watch a lot of vids. Also new batteries are key or your instruments will drop out of the app and go blank and drive you crazy . Take batteries out for winter time so they don’t explode and don’t use Duracell or Energizer they leak, use the Panasonics alkaline that usually says leak prevention on them and there almost as good as the Duracell/energizer.
Great video bro. Liked and subscribed!
I have seen a co worker using this system. It's another thing that is very neat to see in action while at the same time totally unnecessary. Not to mention really expensive.
Really great tool, teacher, thanks for the explanation.
Thanks Luis!
I didn't see the T that you mentioned on your links. Minute 2:41
Great videos as usual
Good video and great training video as well.
Thanks Jose!
Thank you for this video sir 🙏
Nice job
Thanks!
Technology dominates technic now a days. Less mistake and more accuracy and time saving. Awesome
Thanks Ace Look Reno's!
Anyone have these long term? How do they hold up? Looking at either these or the sman gauges
Your the man!!
Like the app for field piece way better than the testo app.
HVAC shop talk sent us
Awesome!
Can you put and low loss fitting on the liquid line probe?
Nice video sir I have one already and they work very good
Thanks Victor!
thanks for this ...
Thanks Pei Broker!
Thanks for teaching by the book. I strive for excellence in all my work and your vids help me gain more and more very detailed knowledge that very often, I see overlooked. I've repaired many units that prior techs condemned in order to sell a new unit. I know, less $ for me but in reality, more $ for me as I am flooded with great referrals and therefore stopped advertising back in 2004. BTW, if same video was with a fixed orifice, are there wireless for dry and wet bulb and what success have you had regarding the range of signal from the inside to outside? Thanks again for your effort & time in producing these vids.
Hey 11Sprinkles, yes the two psychrometers can be used, one as dry bulb and one as wet bulb. It seems that 50-60 feet through multiple floors is when mine cut in and out, thanks
Lovely
what’s the name of that tee he used on the suction probe?
Do you drill holes in ductwork an stick probe inside?
Good video sir
Thanks a lot Steve!
Tengo un kit de esos pero no he podido usarlos, me apoyan para poder conectarme inalámbrico, compartír un procedimiento
Can you post the link for the T you use
How would measure quick integrate into the software package?
Love this kit, don’t use the invoicing stuff, but the PDFs you can send back to my shop, store under a customers name, it super valuable, need to get the adapters for charging, it’s a bit of a pain in the ass right now
I use tees when connecting. I have them listed at amazon.com/shop/acservicetech thanks and they are the same as the ones used in the cps vacuum gauge set, thanks!
Quick question when getting superheat and subcooling measurements Isn't the best way to take those measurements when you're getting superheat is to take a temperature of your suction Line 6 inches coming out of the evaporator. To get a true superheat. Reading for evaporator superheat and when getting subcooling you would take it. 6in coming out of the condenser on the liquid line. Or does it matter?
nice...
Shop talk sent us
Great to hear!
Hi I have a question, can you pressure test the line-set with nitrogen with this gauges and how do you do it? Thank you
Yes, by using the T that he hooked up on the suction line.
What is the range on the temperature probe?!
Great video thank you. If the Field piece will work on hydrocarbon system, that would be great. I will have to check out field piece sight.
hydrocarbon are much higher pressure, thanks Ron!
Where can I get those t's
Could you please provide a video on how to calibrate these instruments. I followed the instructions and the one that is somehow challenging to calibrate is the psychrometer. Thanks.
My joblink app has no metering device selection. No target subcooling, no heart to tap for your tool. Did this change in later versions of the app?
Exact manufactures data has that sub cooling for that refrigerant. This is a retrofit to MO 99. Doesn’t that affect the recommended sub cooling?
👍
thanks for the awesome video. Can you get a print out of the measurement for copy to the customer?
How many wireless temperature clamps, pressure sensors, electrical clamp meters and psychometers can be connected to the app on a single iPad or Android tablet at one time? Is it limited to two of each sensor type? Would I have to have the app installed on a second tablet to view any extra wireless instruments at the same time?
What gloves do you use when working with refrigerant I burnt my hands really bad a few months ago and am looking to get some gloves to keep me safe
how you feel about the apps that recommend weather indoor coil needs cleaning or out door unit needs cleaners i forgot the name
How do I check this with a mini split system that does not have a liquid service port?
Also how many indoor Psychrometer Probes do I need? I am using an Sman480V. It comes with a wired dry bulb. I was using that for the outdoor temp sensor, and I was going to use one of the wet bulb psychrometers for the inside mini split head output temp. Do I need a second wet bulb psychrometer for the indoor mini split head intake temp as well?
It is a good video. I bought this set after watching this video. Now would you please let me know which one you think more accurate Job link App or Measurequick app for this job? Or which one you prefer to use ? Thank you!
Was wondering if it comes with the adapter, just in case you will add or recover?
My question is can I buy the sm380v or sm480v and still use the air sensors with it through the app?
Hi what T fitting did you use? I couldn't find it in your list of tools so if you could link me to it that was be great
Did you find where to buy?
Do you need to calibrate these ever so often?
Are the valves low loss?
Great video. I saw on the iPod reflection you were using an umbrella, if you can recommend or post a link I'm looking for a working umbrella.
ha ha nice, just trying to get a good pic for the video while still outside. It was too noisy inside the building to do the rest of the video, thanks
Which app would you recommend using with these probes, Joblink or MeasureQuick?
do i have to download any app ? it is free?
Scale of 1-10(1 low; 10high). How would you rate this product?
Thk u.
Love all your videos.
Can this be use as a micron gauge to check for leak?
yes you can I don't have a set, but another tech has one and he used it to find a leak.
Hello how re you sir ! thx for your videos ... I d like to buy some good smart probes kits and would like to ha a recommendation my job is to check systems that they re set within ranges and makeing sure hvacr systems are electrically , pressure and temperature parameters good and no leaks and ventilation is ok. would you advise me please I M FROM Canada .
The screw caps of pressure probes are so short that it’s really hard to hook on to service valves especially for R410a units which have higher pressures; and temperature probes are keeping showing OPEN. I submitted the defect designs to them but got no response
How do get the CFM to add it to the app?
If these where connected to appion valve core remover, i can charge refrigerant into the system with just a hose to the tank and a ball valve at the core valve right? And manifold gauges will be something in the past.
yes for breaking the vacuum with refrigerant from the bottle but for adding refrigerant into an system with refrigerant in it, you could use the tee like you see in this video. I have this linked at amazon.com/shop/acservicetech and the t also comes with the cps vacuum gauge I have linked, thanks!
Fieldpiece measure and they leaking you have idea what I can do when I hook it up they leaking
I buy those tools they tools they leak
Please advise what Smart gauges should I get the best one with lot of options to help me charge correctly an HVAC system.
These job link probes are nice for the seasoned tech but if you are just starting out, I usually just recommend standard compound gauges like I have linked at www.amazon.com/shop/acservicetech
Is the Delta T very accurate since you aren't checking right above the coil?
I check within a few feet before and after the coil and use duct plugs to cover the holes, unless the return is close and a supply is very close, thanks!
Quick question what part number is the T to add refrigerant with
Hey Matt, it is the 11th row down on the left, made by cps at - amazon.com/shop/acservicetech --- The one made by yellow jacket as I read does not come with the valve core depressor in it and not sure if there is a seat to stop and hold it if you added so maybe just go with the cps one, thanks
i couldn't find that tee you used in the video, wonder where i could get this in canada?
Mantooth from Yellow Jacket has the port for charging. Unfortunately, the phone connector got loose on mine and they may still be in recycle bin.
Would you use this set up as your everyday setup? I have a standard yellow jacket set of guages and I have a separate meter and clamp for checking target SH and SC. Considered buying Testo or Sman digital guages before I saw this and now I'm having second thoughts.
Some techs do and this will give you insights into the airflow when you use the two psychrometers, thanks!
HI
How would you configure it with king valves no core depressors
I would do the same thing with the same tee fitting attached to the end of the probe. The valve depressor on the inside just won't have to touch on anything. Have you looked up "acservicetech three position service valves" ?
I’ve been using these for the past two months and my only issue is the signal is not that great I lose it at about 50 feet
Hey Matt, the JL2 transmits the signal further if used with the app, thanks!
AC Service Tech LLC I bought it and I use that with the SC 660 and SMAN 460
Matt, I apologize, I wasn't watching what video you were commenting on. For whatever reason, I was thinking the SMAN460 superheat video. Sorry about that!
AC Service Tech LLC Yeah I was checking charge yesterday and for some reason even when I’m close my reading disappear for a couple seconds and then they come back every so often
That happens with me too but it seems only for 1 second or so and doesn't happen that that often. I would call fieldpiece if you feel it happens more than it should. It don't think it should happen constantly, thanks Matt!
How do you check for micron or can you check mircon?
You would need a vacuum gauge to read the micron level. Here is a video on that th-cam.com/video/J4QvgpYFS9U/w-d-xo.html
Hello sir. Do you like them? I am going to invest some. I been looking at the Testos ones.
You cant go wrong with either testo or fieldpiece probes. I just happen to have fieldpiece and they work pretty well, thanks!
Hi there, Just wondering where you purchased the “little tee” you use for you suction side prob. Thanks for the video!
Have you found where to buy?
@@ThermalSolutionsHVACR I did thanks! Local wholesaler had them.
@@coreymclean3815 thank you! I’m going to visit my local wholesale as well tomorrow .. I’ve been wanting to buy those job-links for sometime
Are they low loss?
These are not low loss. However, the point of low loss is to not loose the refrigerant in the hoses to low loss fittings on these would defeat the purpose and add extra refrigerant that is removed into the low loss fitting during connection and disconnection, thanks!
Can i get info on that tee ??
Hey Julio, I got this tee when I purchased my cps vacuum gauge as it's included. Here is a link on amazon to the tee but it is a little expensive. It is odd that this fitting is not an easy one to find by itself with a valve core depressor and two schrader valves. Tee- amzn.to/2Pj594v - cps vacuum gauge- amzn.to/2Pah7NB
Thanks a lot
On your training videos for the Field Piece Job Link you don't show or mention the Wet Bulb or Dry Bulb only the Delta T, why is that. Am I missing something?
I believe in this video that I was checking subcooling and so I didn't need to determine a target superheat which is needed on systems with a fixed orifice metering device. This system had a txv so I checked the charge level with subcooling, thanks!
Did you have issues at the beginning trying to hook up the Fieldpiece JL3KH6 joblink kit to your app and tablet?
I don't seem to no but they should be very close upon startup. What kind of issues are you having!
@@acservicetechchannel I actually figured it out, you have to give the app access to your location in order for the probes to get picked up by the app. I really don't like giving any apps any access to my location, or in that case any access to any type of files on my phone or tablet. I guess I'll have to give the app access while I do my work. Not too happy about that but ohwell. Thanks for your reply. Keep it coming with your awesome videos. I can't wait for your hard cover book to come out :)
Glad to help, thanks Sergio!
Where is the tea that you put on just in case you needed to charge the refrigerator?
It doesn’t calculate delta t? Why not it’d be simple to implement
It does calculate delta T. Video was created 5 years ago. Application has been updated since it was created and does that calculation as well as long term data logging, like for up to 7 days.
Your welcome for the 45 degree female port. They were going to make it straight before I beta tested lol.
I have this on my "wish list" and am wondering about the range. I have some concrete buildings with rooftop units. Will the signal make it through reinforced concrete? Anyone who has this experience to share would be most helpful.
I have just been using it through standard block walls, thanks Carl!
Hola buenos días podrías traducir en español subtitulado de antemano gracias
Thanks Rafael!
Hi, this can be use in the big chiller like trane RTAA 500TR?
It can only clamp around tubes as large as 1 1/8" and be used with 1/4" service ports, thanks!
Fieldpiece RULES! NOT Hilmor
There is no way to hook theses probes to the outside unit to get your outdoor temp included
Can you use these to pressure test?
Sure!