Brushed 550-27t VS 540-17t motor
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- Brushed 550-27t VS 540-17t motor in a 10th scale monster truck.
I want to go brushless with this truck but I’ll test a bit more with brushed motors to help people that want to stay with a brushed setup.
This is the Vampire Ghost 4wd 1/10 Scale monster truck. I’ll be changing this pretty soon to a 3650 brushless 3650 2300KV and the Radiolink RC6GS. First I’ll try one more 550 motor with a lower turn count.
Radiolink RC6GS
If you’re interested in this radio here is an Affiliate link: usa.banggood.c...
#rcmodsquad #daviddoesstuff #cookingwithsherry
I really enjoyed this video. Thanks for showcasing the idea that you don't always need a 60mph RC to have fun in the hobby. I appreciate what you bring to the TH-cam RC community! 👍🏻👍🏻
Thanks man! I really appreciate that. I agree with you completely. I do all these motor swaps to help people decide on what might work for them. It really helps to know it helps someone now and then.
Have a fabulous day my brother!
I don't know my car is so 20mph sounds impressive! That's a nice little jump from the first motor. Fun watching those sharp turns! The cars we used to have as kids always flipped over. They've come a long way. Nice looking truck too! Thanks for sharing. Hope you're having a great day. Stay safe!
Thanks for stopping by! It’s not too bad for the type of truck it is. The car I tested last week ran 50 mph. I’m really curious to see what the brushless motor is going to do once I get it installed. I just need to test one more brushed motor for the people that want to see what the potential of the car is without having to go brushless.
Have a great day my friend and be safe out there!
That truck has been through a lot, he’s lucky he landed in your modifying capable hands, thanks for giving him life
It’s definitely had a struggle. 😂😂
Have a great day and be safe out there!
20 Mph is fast enough for me. I am surprised they will go that fast... Amazing little care... Thanks for sharing... take care...
It just depends on what a person wants to do with the car. They have an RC car that’s officially gone over 200mph. That severely limits where you can drive it. 😂😂
Thanks for stopping by and have a fabulous day my friend.
Nice vid Dave. I think a lot of peke get scared with changing parts and a motor is a simple enough upgrade that most can do easily. Have a good night. Regards, John.
I agree! It’s easier on some cars than others but, I can be done.
Thanks for stopping by and enjoy your day. Be safe my friend!
I can’t wait to see the brushless set up, thanks for sharing.
Thanks for stopping by and your support. Have a great day my friend and be safe out there!
RC ModSquad thank you, have a great weekend
She’s definitely worth tinkering with! Nice little pickup in speed and done in only a few short minutes! Nicely done my friend!👍😊
Thanks and thanks for stopping by. I really like this little car. It’s super easy to work on and I think it has a lot of potential.
This car was a Christmas present so I don’t know too much about it. I’ll do a little research on it and see what other parts availability it has in terms of replacement parts and such.
Have a great day and be safe out there!
Great testing its fun to try different set ups 👍👊💯😀
Thanks my brother! Just order a 12t so I’ll do a very short speed test then on to the brushless. I’ll do that in the same video.
Have a great day and be safe out there!
@@RCModSquad really nice how easy it is to swap out the motor in this one
I think the 540 motors I got recently are going to be a lot of fun!!!
I think you'll like it.
Looks good. Watching a few videos with the morning ☕. 🙂👍
Thanks for stopping by bro! Enjoy your coffee and have a great day and be safe out there!
Cool stuff David! Cut to the chase and throw that brushless motor in and send it! 👊😎
Thanks a Mike. 😃 if II can find the right 550 in a reasonable amount of time I’ll throw it in there and just do a speed run and then do the brushless conversion. I want to change Radio‘s anyway because I’m really underwhelmed with this radio even though it is a four channel radio and receiver.
I’m really curious what the 2300 KV motor is going to do. If it doesn’t cut it on 2s I’m pretty sure it’ll do it on 3s.
Have a great day my brother and be safe out there!
@@RCModSquad lol, You're very welcome! Be safe and have a great day! 👍
ALWAYS a TOP NOTCH video over here. NICE SHOWING of this RIG. GOOD STUFF. DO YOUR THING MY MAN🤜🤛💯🍻✌️
I really like this truck a lot. 😃
Have a great day my brother and be safe out there! Thanks for stopping by! 🙏💯👍🏻👍🏻
Always excellent comparisons 😎
Thanks bro! I’ll try to find a good brushed option today so that I can hurry up and get my brushless set up at there.😂😂
Have a great day my friend and be safe out there!
@@RCModSquad
always a pleasure 😎😁👍
*I am sure what you are saying makes sense. I love the Vampire Ghost Body...of course. I learn something with every video you put out.thanks*
It’s just all about having fun. I’m planning to add LED’s to this once I get the motor sorted out. 😳😃
Have a great day and be safe out there!
Very cool monster truck. Looks like it would be fun to play with. 👍👍👍😃
Thanks and thanks for stopping by. Have a great day my friend and be safe out there!
Hey, once again loving the content! I'm sure it'll have much more kick with the brushless system. Looking forward to the upgrade video and speed run.
Thanks for stopping by and your kind words. 💯👍🏻
I’m looking forward to the brushless update to. Just one more test on a brushed motor and then I’m going brushless. I’ll try to do that in the same video.
Have a great day and be safe out there!
Looks like a fun truck to tinker with 👍🏁
Absolutely!! 💯👍🏻 I think I’ll even add LED’s to this one. 😳😉😎
Have a great day my brother and be safe out there!
awsomme stuff dude, playing around with these rc cars etc is all part of the fun
I agree completely! Thanks for stopping by.
Have a great day my friend and be safe out there!
good evening RC ModSquad. Great video to share with all of us. Hope you're having an awesome week. I almost thought you were someone I knew personally. We all have a twin floating around somewhere
Jdubb Vlogs hello and thanks for stopping by. I think you are correct about us all having a twin somewhere.
Have a great day and be safe out there!
I just saw your channel. That monster truck is a little beast! 20 mph for a monster truck is plenty. 2300 KV would be very torquey!!! Subbed and liked 👍 cheers from Australia ❤
Thanks Dragan sorry for the slow reply. I don't seem to be getting notifications on this channel.
I really like this little truck a lot. The brushless motor was a great addition.
Thanks for stopping by. Have a great day and be safe out there.
Hey Dave! Good stuff. Slow one there, but I bet you can get it to smoke down the road. Would love to see brushless.
Thanks bro! This thing has so much potential. It’s got a tiny pinion gear in it right now.
This car has a lot of potential to go in several directions. I’m also going to goober it up with LRD lights. 😂😂
Have a fabulous day my friend and be safe out there.
Nice motor swap and cool little run,stay safe out there brother
Thanks buddy! It’s really cool how easy this truck is to work on. It’s going to be easy to do an LED mod also.
Have a great day and be safe out there!
Thank you! This is helpful. Was planning to upgrade my trail truck from stock 390 to 540 motor with hobbywing 1080 esc. Was torn between 55, 27 or 16T. I’ll be getting the 16T with 14t pinion.
Sounds like a fun upgrade. Thanks for stopping by. Have a great day and be safe out there!
Subscribe to my channel here:👉 bit.ly/3poGLRA
It’s free for you and it helps the channel grow.
For anyone that’s interested, I did find a 550 12 turn motor that should be in in about a week. I’ll do a quick speed test with it then switch to the brushless system. I’ll get that all in one video.
Thank you to all the people that are interested in this.
@D. Alex Hutchinson I probably won’t do much more with this. I’m not having enough voltage sag to go into limp mode so I might add a cap pack and tinker with the timing but little else beyond that.
Thanks for checking it out.
Have a great day and be safe out there!
Cool looking truck! Have a great week and stay safe!
Thanks for stopping by! Have a fabulous day.
⏹ Woow excellent experience! thank you for sharing! It's important for learn! greetings from NYC 👌😉
Thanks and thanks for stopping by.
Have a great day and be safe out there!
I love this vehicle! Great video
Me too, thanks! Have a great day and be safe out there!
It was a nice boost for 8 min change up. The truck has a lot of potential from what you showed. Interested to see how the waterproof motor does be good for the truck romping in mud.
I’m not sure if the servo is waterproof, YET! 😉😃
Thanks for checking it out.
Have a great day and be safe out there!
Very entertaining! I enjoyed watching! ❤️❤️❤️
Thank you and thanks for stopping by!
Have a great day and be safe out there!
Great video, but I can’t believe you never mention what battery you’re running here, and nobody asks in the comments. Amazing, as it’s as important to know as the motor to me. 😎
Sorry about that. It was just an unbranded 2s 1800 mAh battery. It was the same battery for both runs.
Very nice Test , it done well. Look forward to seeing what else your going to do with it. 👍 great Video 👍😎👍🇬🇧🇺🇲👍
I really like this truck so it will get a little more tinker time! 😃
Have a great day my friend and be safe out there! Cheers!
Love the truck brother, you did some nice work on it. Great video 👍🏼👍🏼
Thanks bro! I’m gonna do some LED’s on this one. I’m not sure exactly what yet.
Have a great day and be safe out there!
Looking forward too, 👍💯
Thanks so much. It’ll probably be a week or so! Thanks for stopping by.
Have a great day my friend and be safe out there!
*Such a cool looking beast of a car!*
Cool video dude, were you able to use the same pinion gear?
Thanks for stopping by. I did keep the stock pinion and it does really well with the brushless motor.
The 5.8 volt output helped the servo too. I still plan to remove the axle bushings and change over to bearings. It’s really a fun little truck.
Have a great day and be safe out there!
Cool video thanks. Looks like a Grave Digger so yeah dig around for more info!
Thanks! 😃 I like the looks of it a lot. It was a Christmas present so I don’t know much about it yet.
Have a great day and be safe out there my friend!
Thanks for this. I was wondering the exact same thing. I have a redcat drift car with a 540 27 turn and I was wondering what would give it a little bump without changing everything out. I like the brushed motor wanna keep it simple... for now
I haven’t run that car so I’m not sure what all the options would be. You should be able to go with a lower turn motor for more RPM and then go with a smaller pinion. That should keep your speed close to the same but give a bit more torque.
@@RCModSquad thank you. I am actually looking thru motor and motor esc combos right now trying to find the best option. I appreciate your input
@@jimmyv1753 You’re welcome! A lot depends on what gear options are available also. If you balance the motor, ESC and gear you can do some pretty cool stuff. 😎
Have a great day and be safe out there!
@@RCModSquad ended up choosing a 540 brushless 3650 5900kv and a 60 amp brushless hobby wing esc. I’ve got a few other cars if it doesn’t work for this one I’m sure it’ll work on something.
@@jimmyv1753 that’s a pretty high KV so you’ll probably end up with a pretty small pinion. Good luck with it and let me know how it turns out.
Cool ...This was Interesting and well made….Stay safe and keep well 😊
Thank you very much and thanks for stopping by. Have a great day and be safe out there!
A great great fantastic video. Really enjoyed watching your video. Hope you have a great Monday. Many thanks from chris
Thanks for stopping by! I really like this truck. It’s gonna get a lot of mods at some point.
Have a great day and be safe out there!
Nice comparison with the motors, that would be a cool truck with rear wheel steering
Thanks my brother! A couple more motor tests then I’ll probably do an LED mid then the rear steering! 😃
Have a fabulous day. Be safe my friend!
Good night... Thank you so much for sharing your video with us!!! Have a great weekend... What's new on our channel? I flew an RC Plane again, my training plane, an old BIX3... be welcome...
Thanks for stopping by and your support. Have a fabulous night my friend.
@@RCModSquad thank you!
Nice 👍 big like 👍
Big thanks
Hi RC how are you? Miss ya!! Have a great day 💞💞
Good morning Lori. Someone turned off the internet in Wyoming yesterday. I hope it’s better today.
Have a great day my friend and be safe out there!
It's build like a crawler, so I don't think speed was a priority.
You are correct and with the option for rear steering that also doesn’t need much speed. That’s why I went with the low KV brushless for when I’m done.
I’m just testing the brushed motors for other people.
Thanks for stopping by and have a great day. 🙏💯👍🏻
Nice video
Thanks for stopping by and your support.
Have a great day and be safe out there!
My titan 12t all die after a few runs on stock gearing. Thinking of buying a knock off titan 21t to give it more torque and reliability
That would be slower but I think it would help! 👍🏻 Thanks for stopping by. Have a great day and be safe out there!
Thank you
So the lower the T number on a brushed motor, the better the motor is ???
I wouldn’t call it better. The “T” is for turns in the motor windings. A lower T motor will give more RPM per volt so more speed but less torque.
The rock crawler folks will use a 65t motor. It gives a lot more torque but a lot less top speed. They are more interested in power and control than speed.
Lower turn motors also require a lot of power so if you go to a 10t motor in say a 144001 it will overheat the stock ESC.
@@RCModSquad Thank you for the reply !
Hi I'm Cliff's son and intrested in a trail crawler. What's your thoughts on budget friendly rtr.
Hey Cory. I don’t really have any larger scale stuff I’ve worked with. If you’re interested in 1/18 scale I have a few I’ve tested. Most of those don’t have real shocks, the just have a set of springs on them. I do have a red cat which would be more into the official crawler category but I have had time to run it yet.
Here is a pretty decent starter truck if you ok with 1/18 scale. th-cam.com/video/8GMTVwHTf98/w-d-xo.html
What was the gearing? Can you gear it to gain more speed?
It's the stock gearing and I'm not sure what the ratio is or what the gear pitch is. I put the brushless motor in and it was all I was looking for.
You can do a 12turn or go brushless.
th-cam.com/video/ZemTN7WkyYs/w-d-xo.html
th-cam.com/video/49l7yiCV0G8/w-d-xo.html
Is a higher turn brushed motor slower then a less turn brushed motor
Thanks for stopping by and your question.
In general yes! I higher turn gives more power and less RPM. As an example the folks doing rock crawling will get a very high turn (35t-80t) motor to add torque and make it more controllable.
Lower turn motors give more RPM per volt but require more amperage so it requires a higher amp ESC.
Have a great day and be safe out there!
You're the man
Thank you very much and thanks for checking it out. Have a great day and be safe out there!
Beautiful video my friend 👍🤗❤🔔 LIKE
Thank you very much for stopping by.
Have a great day and be safe out there!
how long would it take you to change the pinion on the 27t 550 for a pinion with 2 or 3 more teeth ??
I don’t know of any 27 to 30 tooth pinion that are MOD .7 gears.
The only way to do it would be to change the spur and pinion to MOD1 or 32p gears.
The stock motor mount isn’t adjustable so you would have to change the motor mount to set the gear lash.
@@RCModSquad fair enough I don't know or own that particular car,
My first port of call for more speed would always be to alter the gearing especially on a 550 with low down grunt 😉👍
@@gatti493 true. The main problem is the odd gear pitch and the non adjustable motor mount. The good part of the design is the bearing arrangement on the driveshaft. The motor mount has bearings for the driveshaft so the spur won’t get pushed away from the pinion. It keeps the gear mesh very constant.
It has a plastic spur but I don’t know if anyone that’s stripped the spur unless they cut grooves in the motor mount to make it adjustable. WLtoys did an excellent job with the gear mesh.
You can alway just use a lower turn motor for more speed. I don’t think the ESC would handle a 12t or less motor but it might with a fan installed. A 15t or 17t might work pretty well. Unless you have a lot of room 30 mph gets away from you pretty fast.
@@RCModSquad
Lol 30mph , you should see how fast 60mph gets away from you 😂😂
No sorry your right and it all depends on where your using your vehicle, if you are using it in the street then absolutely 30mph is going to be hairy at times but then on a 200m by 200m car park 30mph is pretty slow.
You look like your enjoying the hobby anyway , have you got many RCs ?
I have to ask , is there a 100T brushed motor? Why do ppl still go for brushed motors? I don't get it...
Here is an 80t amzn.to/45NmBWg and HBX does offer a 100t brushed motor.
High turn brushed motors are popular to use in crawlers. They give a lot of low end torque and more control at lower speed.
@@RCModSquad ok , now I know 🧠💯👍 thanks!!!
@@didgeteria9068 You're welcome! Thanks for stopping by. Have a great day and be safe out there.
@@RCModSquad thanks you too . I subbed your channel btw , doesn't cost anything 🫡
So , in rc for dummies , one unit of whatever comes out of the battery will take 100 turns to get to the other side , that means 17t motors are therefore faster in speed but low torque/muscle .
On brushless , less kV means more torque and more kV less torque but much more speed .... So pretty much the opposite of one another ... well I guess both have their pros and cons...
Have fun today , hope it's sunny where you live. Greetings from Germany
Did it also effect the torque?
The torque was a little less with the 540.
550 motor has more torque for off road, steep climb and higher turn (slower) make easier control for rock crawling
True! 💯👍🏻 Have a great day and be safe out there!
My 1:10 Torment will go slow if I use 2s Lipo with the 550 but different story with 3s but my 1:10 torment can handle 3s like whatever doesn't even get hot and in the manual its says I can use 3s... To boring with 2s and 550 need 3s FOR SURE
I thinks so too. I’ll still try and find a better option on a 550 for people that don’t want to go brushless.
I really like the layout in this truck.
Have a great day and be safe out there!
@@RCModSquad I think the truck looks good too
That means i can use 3s Lipo on it?
@@annmatiskam4571 yes
@@annmatiskam4571 I can’t say how long the stock motor and ESC will last on 3s Nothing in here is stock anymore.
Nice video 1like from me
Thanks, I appreciate it.
Have a great day and be safe out there!
Nice subscrib
Thanks and thanks for stopping by.
Have a great day and be safe out there!
so less turns more speed and less power? more turns less speed and more power?
+SIM_HOBBY sorry for the delay, I'm not getting notifications.
That's correct. Thanks for stopping by. Have a great day and be safe out there.
much thanks and i wish same to you @@RCModSquad
Try a 15t HPI motor..Should rip pretty good
On 3s that 2300kv should be perfect
Howdy
Howdy papi! Thanks for stopping by. I hope everything is going well. Have a great day and be safe out there!
WTF That’s like trying to drive a boat on a road. Scary mindset
I suppose it could be. 😃 Thanks for stopping by. Have a great day and be safe out there!
Is that a pedometer on the top? Is that how you are testing the speed? How inventive of you. Hope you are well my friend.
Colorado Martini Good morning! ☀️🌞😃 It is actually a bicycle GPS.
They make one for RC cars but this one is easier to see.
Thanks for dropping by. Have a fabulous day! 💯👍🏻