I'm surprised the mixer didn't get more love. Yes, it's a ride but it's not meant to be part of the amusement park like the other rides. It's more of a carnival/state fair ride that would be brought in for a couple weeks than taken down. It's actually a great design and I'm really disappointed I got into Lego after it was retired. I want it but I don't know if I want to pay an extra hundred bucks for it now.
Whilst I respect your opinion I could not disagree more, the mixer was by far the most creative and interesting build, and the fact that it can fold up on to the back of the lorrys makes it more fun to interact with and easier to store, I found the other three to be lengthy, unrewarding builds and were very monotonous and at the end I just have three massive ornaments
I have the rollercoaster too and for me it has always worked properly, but for instance for my cousin who has it too, it's also a trouble child. What I did though is instead of only using 203 chains in the chain, I used 206 chains. I don't know it that'll help you, but I wanted to let you know this.
My roller coaster doesn't experience the issue with train getting stuck at the bottom of the lift. Try reinserting the Ticket Booth to reduce the loss of kinetic energy in the turn to see if that helps. You may also have too many links in the lift chain; remove one or two links to see if there's too much slack.
I agree, the lack of the ticket booth could be causing some of the issue. I haven't had any issues even when running two sets of cars. I can't fault the roller coaster set, it's by far the best set of the four.
I don’t know what’s wrong with your rollercoaster because I’ve got one and other than a few little things at the start, it runs perfectly now with both carts and the motor
Xander McComb I have one issue with mine, it also doesn’t meet with the lift most of the time. Other issues I have are just because I display it in a small area
Used to have the same problem with my coaster and the chain would always slip when both sets of cars were going up. Works fine now I've checked all columns are firmly in place and cleaned the track for dust. The slightest thing can stop the carriages reaching the lift.
I hate to be the bearer of bad news but there is a 5th set. The original Grand Carousel set # 10196. Where would you rank this? Also, the roller coaster I have problems with it on occasions. make sure to push all the connections down, to re tighten especially after moving it the problem for me is on the sliding rail normally fixes it for me.
Nope, that set does not count in the fairground collection. While it is a carnival ride, Lego does not consider it. In the Haunted House manual it has a list of all the fairground sets, and the OG isn't there.
Try putting something slick or oily on the track of the coaster or clean it with like hand sanitizer or something and it could make it more slick and make it move faster and it'll clip better idk this is just a guess but if I owned it id try it
I had a barely bendt coastercart axle that slowed one of my cars. Lego lovely send a new one. Never had ANY problems with the rollercoaster any other way/time
Am I the only one that sees 9 minifigs when he says 10 for the Ferris Wheel set? My fav is the roller coaster but the mixer is another favorite just because of the variety and uniqueness.
I don't have the coaster but maybe add a half plate to the corner before the chain Jordan to give it a bit more speed going to the chain if that makes sense.
Perfect order. I have problems with the roller-coaster too...really struggles and skips / cracks with the motor running - especially with 2 cars running. Have added and removed links and played with the gears but no change - anyone else had similar issues or know how to solve?
One time I was stuck in the mall for a while and I just helped the guy at the Lego store build the carousel, it was pretty cool
Kedem Segal nice
Lucky
Before the dark times, before the quarantine
Your a good man
I'm surprised the mixer didn't get more love. Yes, it's a ride but it's not meant to be part of the amusement park like the other rides. It's more of a carnival/state fair ride that would be brought in for a couple weeks than taken down. It's actually a great design and I'm really disappointed I got into Lego after it was retired. I want it but I don't know if I want to pay an extra hundred bucks for it now.
1. Fairground mixer
2. Rollercoaster
3. Carousel
4. Ferris wheel
1: roller coaster
2: mixer
3: carousel
4: Ferris wheel
Dang. Ferris Wheel ranked so low?
Carousel is my favorite hands down. I really like the old grand carousel Lego released way back when. But of those 4 carousel is still the best.
Whilst I respect your opinion I could not disagree more, the mixer was by far the most creative and interesting build, and the fact that it can fold up on to the back of the lorrys makes it more fun to interact with and easier to store, I found the other three to be lengthy, unrewarding builds and were very monotonous and at the end I just have three massive ornaments
1 Ferris wheel
2 rollor coaster
3 caruasel
4 fairground mixer
1. Ferris wheel
2. Carousel
3. Roller Coaster
4. Fairground Mixer
Honestly all of them are 10/10 sets for me!
Double check the wheels and track. There must be something slowing it down. Even a slightly rough wheel or a track a hair off will be at fault
I have the rollercoaster too and for me it has always worked properly, but for instance for my cousin who has it too, it's also a trouble child. What I did though is instead of only using 203 chains in the chain, I used 206 chains. I don't know it that'll help you, but I wanted to let you know this.
My roller coaster doesn't experience the issue with train getting stuck at the bottom of the lift. Try reinserting the Ticket Booth to reduce the loss of kinetic energy in the turn to see if that helps. You may also have too many links in the lift chain; remove one or two links to see if there's too much slack.
I agree, the lack of the ticket booth could be causing some of the issue. I haven't had any issues even when running two sets of cars. I can't fault the roller coaster set, it's by far the best set of the four.
@@totallyaddicted2bricks989 Yes, I too often run two or three (+ one from the Joker Manor) without issue
Could you rate the Modular Buildings? Great video!
There is a great rating video of the modular buildings by Alex Nunes. He has all of them.
My ranking:
1: Roller Coaster
2: Ferris Wheel
3: Carousel
4: Mixer
I don’t know what’s wrong with your rollercoaster because I’ve got one and other than a few little things at the start, it runs perfectly now with both carts and the motor
Xander McComb I have one issue with mine, it also doesn’t meet with the lift most of the time. Other issues I have are just because I display it in a small area
@@BrickFort_ sad, maybe trie adding/taking away a few of the links?
Xander McComb ok I’ll try that
Great video! Please can you rank all of the Modular Buildings in order? That would make for a great video.
What are your cabinets demension? Where can I find them?
Should I get the 2017 carousel or the assembly square modular building?
Carousel
Assembly Square
1.Roller Coaster 2. Ferris Wheel 3.Carousel 4. Mixer
I love all the fair ground rides but my favorite by far is the roller coaster
Hi would there be any more carnival rides coming out in future?
This is a video we needed! Great job guys
Used to have the same problem with my coaster and the chain would always slip when both sets of cars were going up.
Works fine now I've checked all columns are firmly in place and cleaned the track for dust. The slightest thing can stop the carriages reaching the lift.
The fact that the ticket booth is not in place may not be helping either.
Nice video. My only favorite expert ride is the ferris wheel it is the only one that I like. Sadly never got it.
I can’t pick a favourite! They are all amazing.
0:44 This will make a fine addition to your Amusement park
I hate to be the bearer of bad news but there is a 5th set. The original Grand Carousel set # 10196. Where would you rank this? Also, the roller coaster I have problems with it on occasions. make sure to push all the connections down, to re tighten especially after moving it the problem for me is on the sliding rail normally fixes it for me.
Nope, that set does not count in the fairground collection. While it is a carnival ride, Lego does not consider it. In the Haunted House manual it has a list of all the fairground sets, and the OG isn't there.
I would have said the same thing Bricksie. Good job!
You uploaded it just a few days too soon lmao. They’re hard to rank but the Haunted House is awesome too
Do the motors come with the sets
No
@@andykillsu ok
I have the carousel roller coaster-cost and the mixer but I really want the Ferris wheel but it got discontinued as I went to buy it
should make an updated one for the loop coaster
Can you get the bricklink hot shot gallery and put it by the Disney castle
For the roller coaster maybe try pushing down all the track and checking that there's the right amount of chain link pieces in the lift mechanism.
You don't have 31084? (The pirate roller-coaster) that's actually the biggest set that I have.
That is a Creator 3 in 1 not a Creator Expert. If he was going to include that one, he should have also included Fairground Carosel (31095)
We are saving our money for the roller coaster after watching this video!
Try putting something slick or oily on the track of the coaster or clean it with like hand sanitizer or something and it could make it more slick and make it move faster and it'll clip better idk this is just a guess but if I owned it id try it
The mixer has two motions to and the two motions are the cars and the mixer is spinning
What about the fairground haunted house one
Favorite is definitely the Roller Coaster. Just waiting for it to be back in stock.
I had a barely bendt coastercart axle that slowed one of my cars. Lego lovely send a new one. Never had ANY problems with the rollercoaster any other way/time
Sorry for the bad spelling
On the carousel, you need to push the bendy white poles (above the cloth) down a notch. :)
The coaster needs to be placed on two 48 by 48 plates to solidify the coaster.
You should check out CDX blocks and try one of their coasters. Yeah it is not Lego, but it is awesome.
With my coaster I built some extra carts making it 5 each per loop I now don’t have the problem
Although I don’t have any fairground sets the carousel would be my favourite.
Am I the only one that sees 9 minifigs when he says 10 for the Ferris Wheel set?
My fav is the roller coaster but the mixer is another favorite just because of the variety and uniqueness.
Just got lucky to buy a mixer for 150USD in 100% shape. No way to get my hands on the others here in Vietnam 🇻🇳
looks amazing
My favourite is the ronacoster
What about 2009 carousel
I love you bricksie I was super early today
What about the Haunted house?
I think the roller coaster is the best :)
Do you have Instagram Bricksie?
2
I have the rollercoaster😺
Josee +10 ♥ Jordan 9 1/2 ♥
I don't have the coaster but maybe add a half plate to the corner before the chain Jordan to give it a bit more speed going to the chain if that makes sense.
This is awesome.
Woah!
hey jordan
Man im so jealous
:shocked:
Perfect order. I have problems with the roller-coaster too...really struggles and skips / cracks with the motor running - especially with 2 cars running. Have added and removed links and played with the gears but no change - anyone else had similar issues or know how to solve?
Martin Ferguson yeah I have this issue 2 it’s weird
Can I have it sence you don’t like it it is my dream LEGO and the roller coaster is also my dream lego
Nice
Love it!
I have a LEGO carnival come see mine
Oh really
Name: disney land
I'm 10
Leuk
すごく かっこいい☆^^
Is she your girlfriend
Wife
Bricksie have any kids
I WANT FREE LEGO PLEASE