@@sirobb but will that problem come up as p0101 what are common problems that will trigger a p0101 besides a massirflow sensor because i bought a whole new sensor still comes up
@@andrewsantana1660 this is a diesel engine with vac pump , so will not affect maf input ,1 or both engine mount dampers have failed to create this noise .
Nice Video!! I have a V50 1.6D 2012 which sounds the same without the clamping. It will continously draw 5.6l/100km instead of the indicated 4,3 - 4.7 l/100km and feel kind of laggy and tired. Also, when I give a little gas to obtain 1200 rpm, the idle is pulsating +-50 rpms, and will drop down to 800 rpm again, and then pulse up to 1200 again. Where exactly are you clamping? How did you fix this? I have done a smoke leak test but did not find anything! :/ Regards, walp
Excellent, this is exactly what my car is doing now, plus limp mode and engine service required coming up. The tug boat sound is attributed to this
It's not the boost solenoid causing this as mentioned in the description.
It'll be a worn pneumatic engine mount leaking vacuum.
I had a MAF failure and i haven't checked since.
+BlearyBoy1 A new MAF won't fix this noise so it's probably still doing it.
@@sirobb but will that problem come up as p0101 what are common problems that will trigger a p0101 besides a massirflow sensor because i bought a whole new sensor still comes up
@@andrewsantana1660 this is a diesel engine with vac pump , so will not affect maf input ,1 or both engine mount dampers have failed to create this noise .
hello, if you plug the hose in and the sound goes away, it means there is a leak somewhere, if the sound is knocking, it means there is no leak or
Engine mounts?
whot need to be change?
Nice Video!!
I have a V50 1.6D 2012 which sounds the same without the clamping.
It will continously draw 5.6l/100km instead of the indicated 4,3 - 4.7 l/100km and feel kind of laggy and tired. Also, when I give a little gas to obtain 1200 rpm, the idle is pulsating +-50 rpms, and will drop down to 800 rpm again, and then pulse up to 1200 again.
Where exactly are you clamping? How did you fix this?
I have done a smoke leak test but did not find anything! :/
Regards, walp
the noise disappears for me
my not working 😔
проблема в чем была?
Там проблема в одной из двух вакуумных подушек , и скорее всего это передняя
th-cam.com/video/QxR3eLkIoZQ/w-d-xo.html&feature=share
It’s the same problem happening with my car so what I need fix or replace?
It could be your bottom engine mount or both mounts have a vacuum leak. This is the problem i have