PV Solar Panel Analysis in ANSYS Thermal System
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- In this tutorial, I will demonstrate how to simulate heat transfer on a solar PV collector with steady state analysis. In addition to, how to calculate the sun angles and solar beam radiation.
_____________
To download the 3D Geometry, please go to this link:
drive.google.c...
its very generous to make a video like this. Thank you
وفقكم الله لكل خير وزادكم الله علما
Valid the paper result is a perfect idea
Very helpful video Thanks a lot.
Very nice video. Thanks!
عاشت ايدك و حهودك مشكورة
good job my friend.
I actually just zoned out and listened to the music
Do u have a video for first steps showing how you draw the geometry?
How can I get a solar PV geometry image? Is it necessary to draw it first?
after i click generate in DesignModeler for the geometry it doesnt work and gives this error
Error: Parasolid schema directory/file not found
Context: Geometry Engine, while generating Feature Import1
yea I am facing the same problem. Did you get a solution to this problem?
Why shared topology is not used for this problem ?
Can i ask a question? In general, the surface temperature of PV panels is 45 degree during the woring period. However, according to the coefficiency of all material, your simulation result is over 45 degree. Can i know the reason why?
Best regards
I got the same doubt. I think much of the radiation is utilised by the panels to generate electricity. So all that radiation is not converted to heat.
I could be wrong though.
did you find an answer to this question?
I can't proceed from modeling phase... ansys mecha program is unable to read the solar panel file from another ansys program... what is problem??
i want to modeling pohotovoltaic in camsol,can you help me?
Good gob,Thanks
great job
Sukru Ulukaya Thank you
@@Saudaljadir ممكن ايميل حضرتك أو أي وسيلة للتواصل
@@Saudaljadir can u send me d geometry plz
@@anirudhka1591 Hey did you got the geometry?
thank you for your efforts and please is there any video or lessons about simulate PV or PVT cooling solar in comsol?
I am looking for similar application on COMSOL, did you manage to find one?
@@juliannwodo3928 I still to find out one and still working on some cases..could you send me any contact details to be in touch with you?
@@hazimdirawi8852 I am not sure what TH-cam policies are about this. If you can share your email, I will reach out to you.
السلام عليكم استاذ عاشت ايدك بس شلون اكدر اغير القراءات وتأثير درجة الحرارة اللوحة؟ممكن احد يجاوبني او ينورنا باي معلومه
Im trying this to my system (which I have only substrate with holes on it) and the error messages occur saying that mesh couldnt be managed.
I am unable to get a panel view while playing temperature 2 animation.
Thank you for the tutorial, I am currently using workbench 2021 R1, but when I proceed to solve it I'm getting this error "Your product license has numerical problem size limits, you have exceeded these problem size limits and the solver cannot proceed." What can be done to solve this?
You have the Student Version most likely, get a crack version or pay for the full license. It's annoying af
@@josezazueta9853 Thank you
@@preetiprasad3933 have to tried and got the solution ?
@@biradarshashank6621 I tried decreasing the number of nodes and found the solution
@@preetiprasad3933 Hello. Can you tell me please how do you decrease the number of nodes? Which part it is? Thanks
thank you so much can we modify the geometry ? how can we modifie it?
the minute I try to select the two faces for the heat flux, ansys suddenly stops working and doesn't respond to any command. Anyone knows how to deal with this ?
Is it possible to set the same temperature for inlet of PVT and ambient temperature?
thank you so much can you do for CPV triple junction cell please i need it for my internship
how did the internship go? I'm assuming you're a working engineer now
are there any COMSOL video about PV ?
Why the glass temperature is higher than the pv cell in analysis??
In practical, cell temperature is higher than glass temperature.
Can i get the drawing?
Sir please share the geometry.the link in the description you provided, the file isn't opening.
Hey did you find the geometry? I need it
سؤال:
اذا كان العمل ع المجمعات الشمسية ذات القطع المكافئ.. نفس العمل لو يختلف
دكتور ممكن جواب عندي بحثي متأخر
الي يقرأ يجاوبني رحم الله والديك
سلام عليكم مشكور صديقي في مجال اتواصل معك لانو عندي مشروع عنفس البرنامج وبوجه مشاكل
how do you set the angle on the PV Panel?
Good BGM
I have tried this into my student version but I'm not able get solution reason is problem size limit
Can u please help me to solve it 🙏
Sir please share that solar panel file which is on your desktop...
SIR, WHY I AM UNABLE TO IMPORT THE GEOMETRY THAT YOU HAVE GIVEN
Same problem
Same problem
Me to bro
Hello, from where I can get the geometry? Please share the geometry
Hey did you find the geometry? I need it
Sir can you please tell the dimensions of pv panel you designed and thier ratings
Hey did you find the geometry? I need it
Could you send to me the drawing on a type where I can open it on Autocad? Thank you.
احسنتم دكتور
عندي استفسار ممكن اتصل عليك..؟
Thank you for the tutorial, I am trying to replicate the tutorial but I keep getting the error Your product license has numerical problem size limits, you have exceeded these problem size limits and the solver cannot proceed. Is there a way around it? Thanks
Did you find an solution? I am using this tutorial and having error.
I'm having the same problem
I'm having the same issue, is there any way to fix it?
عمل رائع 👍
ممكن من حظرتك ادزلي رقمك او الفيس مالتك ع مود استفسار☺️طبعا اذا امكن؟
ممكن ترسلي رقم نقال او ايميل حتى ارسلك لان محتاج منك بعض معلومات ضروري مع الشكر
شابو