Nice job, it's looking really good. It's really cool to see someone take the time to repair a mistake themselves instead of just throwing away the chassis. I imagine the owner will be happy to have it back on the track.
Kisa-Chan, That was a bad accident. I'm so glad you weren't badly injured! We can always get another car, but we can't get another Kisa! I really like your videos and you speak very good english. Can you do more english videos for us in the USA? I look forward to seeing more of your drifting videos. Thank you from USA!
Recently I was able to bend back into shape the front bumper as well the lower front balance of my 1977 Nissan Junior by using a hammer and a piece of wood, also I didnt know it was that hard to find parts for the S13, I thought theres was some factories that still make new panels for the S13
With 180 parts getting harder to find do you think their days as competitive drift cars are nearly over? 350s get used by amateurs where I'm from, what's stopping pro's from using them over rare and expensive S chassis, lack of available mods?
前回の動画はこちら💗
th-cam.com/video/L-mwUQqTQlA/w-d-xo.html
板金屋さんの職人技術すごくてうらやましいです😾
Hi Kisa your English is getting better. Thanks for the updates and content. Happy for you Sugoi 🙏✌️🇦🇺
エンジンを降ろさずに板金してるのが凄い😊
時間があまり無かったのでしょうね😊
Nice job, it's looking really good. It's really cool to see someone take the time to repair a mistake themselves instead of just throwing away the chassis. I imagine the owner will be happy to have it back on the track.
凄い技術ですね。綺麗に直りそうで良かったです☺
早く元気に走る180sxが見たいです😄
Interesting seeing how a damaged car can be repaired. It will be good as new, and thank you for the subtitles!👍
Great video, pretty interesting to see the process of getting the car fixed.
Kisa-san speaks good English
クラッシュからの復活180SX走る姿を楽しみにしてます
すごいですね！廃車同然からあそこまで修復出来るなんて！
完成が楽しみですね！
Wow the attention to detail the guy doing the work on the front end the guy is awesome. Is this going to be a practice car
Kisa-Chan,
That was a bad accident. I'm so glad you weren't badly injured! We can always get another car, but we can't get another Kisa!
I really like your videos and you speak very good english. Can you do more english videos for us in the USA?
I look forward to seeing more of your drifting videos.
Thank you from USA!
Or.............you can learn Japanese 🤔
Recently I was able to bend back into shape the front bumper as well the lower front balance of my 1977 Nissan Junior by using a hammer and a piece of wood, also I didnt know it was that hard to find parts for the S13, I thought theres was some factories that still make new panels for the S13
思ってたより綺麗になっててビックリ
アライメント調整必須だねこれはw
早く直るといいですね！
サムネ映えが何より凄いｗ
これはフレーム修正どこまでやるかなんでしょうけど、色んなの観てますが本当板金屋さんは沢山修理やってるとこほどノウハウ凄いですね。
最近は海外の技術持ってきて、完全に直す機材まであるし凄い時代なってきましたね＾＾；
With 180 parts getting harder to find do you think their days as competitive drift cars are nearly over? 350s get used by amateurs where I'm from, what's stopping pro's from using them over rare and expensive S chassis, lack of available mods?
new change body from 180sx intro 240 sx new toyota 2jz engne with trany
Taro-chan ❤
❤️🙏
なんだ自分で治すのかと思った。
フレーム修正ですか大変ですね。
フレーム修正が悪いとは言わないですが
それって寸法だけの修正合わせですよね
シャーシ全体に火を使用しないでください。構造全体を弱体化させ、衝突の可能性がある場合は運転席に影響を与える可能性があるため、この姿勢は非常に危険です。
なぜ4点固定しないのでしょうか サイドメンバーを引く際に車の後ろがあがってますよね ４点かけるのが面倒なのかはたまた馬が２個しか無いのか
別件ですが、３０のアルファードだかヴェルファイアの黒 ヒョウ害をパネル交換無しでパテで直してましたね、現金修理ですかね
うちも同じ千葉北西部なので夏前に降ったヒョウの作業がディーラーから大量に入庫してます、保険事故なのでルーフ、フードはもちろん被害が大きい側のドアやフェンダーは交換してますけど
4点で無いのは不思議でした。それぞれの直し方があるんですね。
車前上がりで固定なのに、引きは水平に引いてますねー😅
ま、最後に寸法出てれば方法は色々ですけど。
お姉さん 英語 すごいなぁ
見た目は キレイに 成ってもなー 競技車として 大丈夫なの？
競技車じゃなくない？
やっぱりそう思いますか。
フレーム修正って寸法合わせても、元には完全に治らないのはメカニックさんはわかると思うんですげど，，，
@@ながせよしき-l9f だからってやらない選択肢はないでしょ。それに自分の車じゃ無いし。
大丈夫なように直すのがプロなんで変な心配いらんと思いますよ。
ネタだからいいだよ