Just got this from Amazon UK. Went together easily and very accurately made. The only issue I had is the spring tensioner bolt that has to be replaced. Using the stock stepper screws and the stock Neo extruder, the edges of the bolt hits the stock screw and I had to use pliers to turn it, it appears the stock Neo extruder is slightly different than the one in the video. I could have used a low profile screw if I'd known. Other than that, a superb kit, well done. Oh and a little tip for anyone doing this, when you come to fit the stepper bracket, screw in one of the supplied screws, screw it into each hole you intend on using to clear out the powder coating from the holes. I thought the screw threads were the wrong size until I realised. Great kit though, loved fitting it.
Did you have an issue with the brackets being EXTREMELY loose?? I have never had a bracket shake like this one before. And of course, a shakey bracket makes for shitty prints.
Dang, I already got the entier direct drive unit. 😢 Should I send it back and just get this and use the hotend that was originally on the ender 3 neo? I have noticed that with the full unit, I am losing an inch of work space since putting the CR Touch back on 🤷🏼♀️
42-40 stepper as a direct drive... on a single Z leadscrew printer... and it's tilting to the side without the screw. So how's the print quality? I bet it's worse than the stock bowden.
@@gregbiber2787 Hello, we have shipped our first batch half month ago ,usually it takes about a month to be delivered,I will contact you once it is available.
@@msahin3 yes but i have heard that it will work just try it and if it doesnt work you cant calibrate esteps by hand. atleast give it a shot and you can always revert it
so if I no longer have the original hotend on my ender 3 neo then I need to get the non neo series attachment correct? I have the red hotend like the ender 3 now not the bowden one that came on it.
What's up ,folks!
This Ender 3 neo series direct drive bracket is available on US amazon now :
www.amazon.com/dp/B0CBMQ6RGH
Hi! Will this be available on the amazon UK or EU site? To my shame I accidentally bought the non-Neo version.
Yes it will be available on all the amazon market, please return the non-neo version and buy the correct one😂@@danielmurray3239
@@unitak3d-club427much appreciated! I ordered during the week, the bracket fits lovely!
Just got this from Amazon UK. Went together easily and very accurately made. The only issue I had is the spring tensioner bolt that has to be replaced. Using the stock stepper screws and the stock Neo extruder, the edges of the bolt hits the stock screw and I had to use pliers to turn it, it appears the stock Neo extruder is slightly different than the one in the video. I could have used a low profile screw if I'd known. Other than that, a superb kit, well done. Oh and a little tip for anyone doing this, when you come to fit the stepper bracket, screw in one of the supplied screws, screw it into each hole you intend on using to clear out the powder coating from the holes. I thought the screw threads were the wrong size until I realised. Great kit though, loved fitting it.
Did you have an issue with the brackets being EXTREMELY loose?? I have never had a bracket shake like this one before. And of course, a shakey bracket makes for shitty prints.
@@kimgerlach-stosboutique No, it was absolutely rock solid.
I had this problem too, you just need to turn the spacer for the bottom roller to adjust it.@@kimgerlach-stosboutique
Sorry, not the hex nut, there is a hex spacer on the other side of the wheel that you can adjust to fix the wobbling.@@kimgerlach-stosboutique
@@DuckAnimation1 ahh ok, I see. I will try that. Thank you.
If you have any left, I would love to test this out.
Hi Jason ,please send email to our sales team for the FREE sample:
Mailbox: group_redrex3d@yeah.net
@@unitak3d-club427 there is a free sample?!?
Dang, I already got the entier direct drive unit. 😢 Should I send it back and just get this and use the hotend that was originally on the ender 3 neo? I have noticed that with the full unit, I am losing an inch of work space since putting the CR Touch back on 🤷🏼♀️
42-40 stepper as a direct drive... on a single Z leadscrew printer... and it's tilting to the side without the screw. So how's the print quality? I bet it's worse than the stock bowden.
Out of curiosity, how possible is it to make something reverse compatible with the non neo ender 3 and ender 3v2, etc printers?
Hello guys!
This new bracket will be available on amazon next month and we will offer 10pcs for FREE test.
If you want to have a FREE one ,PM us now!!
Yes please I'll try 1 thanks
I.would love one
@@gregbiber2787 Hello, we have shipped our first batch half month ago ,usually it takes about a month to be delivered,I will contact you once it is available.
Please can i have a link for it ?
Hello! I would LOVE one pretty please
Looking to get one pls.
Do not want to go with the sprite kit
hello dont we need to adjust the e stepper values once this is mounted on the printer? and what are the values? thanks
For my max neo with sprite pro its 424.9 try it!
@@LucaThePupineer I do not have the sprite pro and my printer is ender 3 v2 neo
@@msahin3 yes but i have heard that it will work just try it and if it doesnt work you cant calibrate esteps by hand. atleast give it a shot and you can always revert it
I would like to try one of these if possible please. Thank you. I have a Ender 3 V2 Neo.
Hi Floyd ,please send email to our sales team for the FREE sample:
Mailbox: group_redrex3d@yeah.net
Hello, i'd like to try one!
so if I no longer have the original hotend on my ender 3 neo then I need to get the non neo series attachment correct? I have the red hotend like the ender 3 now not the bowden one that came on it.
Yes if you have got the ender 3 red hotend ,please buy the ender 3 direct bracket.
I'd be interested in trying one.
OK sir
Hi Bryant,please send email to our sales team:group_redrex3d@yeah.net for the FREE sample
I would like to try this. Is it available?
Hello, we have shipped our first batch half month ago ,usually it takes about a month to be delivered,I will contact you once it is available.
Hi ,thanks for your waiting ,please send email to our sales team for the FREE sample:
Mailbox: group_redrex3d@yeah.net
Is this compatible with ender 3v2 neo?
Yes it works with Ender 3 V2 Neo
Is this compatible with the Ender 3 Max Neo as well?
(I'm getting one in the future!)
Hello ,it won't fit on Ender 3 Max neo ,which has different dimension
@@unitak3d-club427 But the nozzle and extruder parts look the same!
What stepper motor to fit that dual extruder
Ender 3 Neo series have a longer shaft stepper motor,it does the job flawlessly
@unitak3d-club427 I have the neo max and it has the shorter motor shaft and does not fit mine.
I am interested
OK sir
Hi ,please send email to our sales team for the FREE sample:
Mailbox: group_redrex3d@yeah.net
What hotend is that
stock
It is a Ender 3 Neo stock hotend
Yes please I'll try one thanks
@@hornetlm42 OK sir
@@unitak3d-club427 does that mean I'm getting a free bracket to try