My original "Project Pumpkin" that I built in the late 80's uses a Trinity Triad 10T 50,000 rpm motor, Sanyo "pushed" nicads, and a Novak T4 ESC to handle the power. I shimmed the gears, used a Thorp Dirt Burners Blackfoot steel hybrid Counter-Gear, Team CRP Adjustable Motor-Mount to use a higher pitch pinion, a Miracle Speedway Racing Products Gearcase Strengthening Kit, and a custom wheelie-bar. Without the wheelie-bar, I could backflip the truck in place! The rest of the truck is completely tricked-out and runs great to this day! I ran it mostly off-road, which is a lot more forgiving than pavement, but it has always been one of my favorite R/C vehicles.
I did same thing in a way! Approx same motor on a Novak something I can’t remember now. Ran the hornet pinion. At speed the front suspension collapsed and the pumpkin shattered into pieces! It was flipping for ever!
I see what you meant about the 11t!!! Man that thing rips - I think I would keep to the grass if it were mine - that poor hard shell! Goes like a rocket, Glenn! Thumbs up my friend! :))
Crazy fast.. see you don’t need a brushless in every set up. Probably the fastest LB I’ve seen. I’m with you on not wanting to damage the shell. I spend way too much time on them that’s why I paint two.. one to drool on and one to stretch some plastic!
I did the same. I finally bought mine on Friday or Saturday. It's fun enough, but the suspension is the worst I've seen on any R/C car, and I've never had an actual kit before, only cheap cars from Sears and Radio Shack. If you've bought yours, hopefully you've been able to upgrade the suspension because it's really bad. It even sounds cheap when the shocks bottom out.
The wonderful mix of pain and joy as you roll it, but can’t stop hooning it about 😂 no one has the self control to keep it sensible with a modded lunchbox
OK so I know this is an old video but I finally bit the bullet and got a lunch box. My daughter has started watching your videos with me. And as a result the lunchbox we have built is a fetching shade of pink. My question would be what is the best motor upgrade possible with the TBLE-04s speedo? Also thank you so much for keeping your channel family friendly. My daughter who is 9 years old and autistic has started to respond to your into with comments like your welcome or no its my pleasure! And it truly is. Thanks again and keep on keeping on fella your doing a great job.
I had the Pidnight Pumpkin and I loved it the only thing bad was the hard body....always frustrated seeing all the scratches after a run....but so much fun these cars.
Just catching up on all the vids on your new channel as I have been a subscriber for a couple of months. This was so fun to watch. Put a smile on my face seeing the lunch box run on that motor. Thanks again
Just ran her on a 2s standard rs540 set up. And wow. Wheelie at about 5-10 mph. Can't wait for 10.5t brushless. Already flipped and wrecked so ordered a midnight pumpkin for shelf lol.
Wow the tire balloon is crazy i see you got a esc with a cooling fan i just put one in my frog the tamiya esc couldn't handle a 17t with out overheating need to get the black body on that crazy box that way when you roll the scratch s dont show excellent video full watch👍👍💣💣
@@philthyco1 what spray do you use i was wondering about that and the esc i got for my frog is a new rain its a cheepo but seems to do good ill do a vid on it when i try it in the snow soon
@@kenhollywood4990 that's the battery rating of a lipo battery versus a nickle metal hydride battery. Lipo batteries are rated in battery cells. 2 S means 2 battery cells giving 7.4 volts. 3 S means 3 battery cells giving 11.1 volts . You know it's like the difference between a standard Tamiya 7.2 volt versus a 8.4 volt hump pack like used in the Big Wig or some modern day Traxxas Slash when they use a 8.4 volt 7 cell. You can see through the Traxxas battery casing and see there is 7 battery cells soldered together in series to give 8.4 volts output. But nickle metal hydride is a waste if time these days. For maximum performance go with lipo. Just make sure to buy a quality battery and battery charger to monitor and look after your battery and always put the battery in storage mode when not using plus not to overcharge a battery as they can be touchy. But that's the case with all batteries. All batteries can explode if overcharged. Storage mode is just lowering the voltage to a safe level when not using for a few days or an extended time and it's vital with lipo batteries. If you discharge too low the battery may not take a charge again . Make sure to ask some questions from your hobby shop and get some advice if needed. There nothing wrong with getting good advice when venturing into new ideas.CHEERS MATE.👍👌
That's pretty fast Glenn. I'm interested in a couple of things too like what radio are you using as it's been years since I've seen a stick control radio with an extending aerial. I know stick control radios are still around but these days they use 2.4 GHz and don't have a n extending aerial. And I noticed a mechanical speed control and resistor in there too but the mechanical speed control wasn't moving so that looked like for display nostalgia purposes 👌 I like your thinking there. And where did you get yourself a Tamiya super modified 11 turn motor. They seem pretty rare these days, maybe discontinued? Lastly have you put a Speedo on to get a speed reading ? I would be very interested in top speed. I must say the sight of the rear tyre ballooning out when you only let one tyre spin was SCARY ! I probably would have worn some safety specs doing that. You never know mate. Like do you remember Robert Wagner when he was in Austin Powers Gold member and his character was number 2 or maybe number 1 ? And he had an unfortunate experience with a male enhancement aid behind a curtain with a light and shadows? Then after that he required an eye-patch ?? It was hilarious 🤣🤣😂😂 But it could happen when a tyre balloons in that way. Quite scary to see them ballooning out like that. Love your work Glenn 👍
That thing is awesome, I have a Midnight Pumpkin (was chrome model but now red bull) I need to do this! Also terra scorcher I have too needs some mods!!
Back in the late 80s I put a 14 turn Tony something in my Kyosho Javelin and it took it. I had the belt drive conversion and my only issue was melting the connectors on tamiya plugs. They couldn't take the power transfer. Battery lasted like 8 minutes. lol But it was fast and fun.
Oh my! That is scary fast! Have you considered a test with a Lipo? If you do, get a used body for testing! I cringed on that first roll over. Can't imagine how that made you feel. Hope the body repair was minimal. As usual, thank you for your videos. I enjoy each one and learn a ton! Happy RC'ing!
Takes me back, I’m digging my pumpkin out my mum and dads loft. Had a Parma cyclone 2 fitted and it was awesome back in the early 90’s- reckon a new ESC and new spec battery pack are calling !
Hey Glenn, question. Got the lunchy kit coming from our friend the infamous elf. I’ve got a 21t Holmes hobbies motor. Do you think that’ll be too much, or will it be ok? Mr elf thinks it may be too much for it. I’m asking opinions on this. I’d like to do something more than the stock silver can but at the same time I don’t want it to be uncontrollable
I am hooked on your shows. i really enjoy how carefully you enplane how or what it is you are working. Have my case of beer, RC cars & tools, going to binge watch your shows till I pass out or day breaks so i can put what i have learned out the road with these RC's . Thank you once more.
That's nuts! looked like great fun tho ... And was that the Hot Fuzz parked up? making sure you wasn't breaking any speed limits with the Super Modified 😁👍
I used to run a lunchbox at my local club meeting back in the 90's 18×2 with a 23 tooth pinion, electronic Speedo, and 1700 scr battery (if I remember correctly) Stupidly quick, and I beat many a 2wd buggy lol.
Great Lunchbox, are you going to to any upgrades? There is a great upgrade for the steering on Shapeways.com, it will bring the steering into proper double wishbone with the cc01 modifications and you really should upgrade the shocks to the ones suggested in the instructions. Anyway, great video.
Funny to watch. But you need to do some upgrades to the chassis before putting in a fast motor like that. Ball bearing in gearbox would make it run smoother and quieter
I’m after an esc to power the same motor but I don’t know which one to purchase I’m kinda new to this hobby I’ve also got the lunchbox it’s great fun just want more power 😃
Glenn, What was that ESC you were using? I have a few of these motors that I’m going to be putting in my egress, Avante, and vanquish, is it any good? Can you recommend a good ESC that will handle that motor with a fan and fit in the chassis?
NY ISLANDER313 At that time I was using a NewRain 320a ESC. But I’m on the lookout myself for something else after I blew the one I had 😭 Those motors run great my friend 😊👊🏻
TAMIYA Legends I have been pretty satisfied with the hobby wing 1060”s For all of my 23T Tamiya motors but it doesn’t go that low of a turn, since that motor is an 11 T
Cool vid and review of the 11T! may I ask about long term: does Lunchy hold up to brushless power? My mate is telling me to go for 23T RZ rather than brushless for fear that the car cannot handle anything more? Any thoughts please?
Yeh I reckon you should go with the super stock RZ motor and that will be fine. Brushless motors are overrated anyway. My Super Hot Shot with a super stock RZ and 13 tooth pinion gear using full bearings and running a 2 S lipo nvision battery plus Louise phantom tyres and wheels gives me a speed of 27 mph which is 45 kmh. I reckon that can be improved on too. Like by removing some grease from the gearbox and differential as I put eat to much in when building. Plus the Super stock RZ motor has got adjustable timing. Some may argue otherwise and Tamiya may say otherwise but the end bell where it screws to the motor can has measured graduations / increments or timing numbers. So it's definitely adjustable. So is a Tamiya GT Tuned motor. The reason I used a 13 tooth pinion gear is because the Super stock RZ motor winds out to 27500 RPM and to take advantage of the power band but I think somewhere inbetween 13 tooth pinion to 15 tooth pinion gear will also lift top speed slightly more. So with brushless the timing is controlled on the ESC and not adjusted on the motor can itself. I'd say stick with a Super stock RZ motor or even a GT tuned Tamiya motor. You will be more than happy with the performance 👌💪
Hey Dude. I've just found your most excellent channel and subscribed. I have lots of modern cars and feel the need to have something different and older. I'm thinking Lunchbox, Pumpkin or Hornet. You've probably been asked a hundred times but which parts make a SuperHornet special? Thanks
Grumpy Granddad Stinky’s RC Dump Hi thanks for watching 😎👊🏻 Out of the cars you mentioned the LunchBox is by far the most fun 🤪 The Super Hornet is completely different from the Original and is much better, better suspension and better wheels and tyres, but it’s still an old buggy so the handling isn’t great. If you look at my channel videos I recently restored one and ran it 😎👊🏻
Thanks for the reply. I was thinking along the same lines but I'm bad at making decisions. I might be disappointed with the Hornet against my brushless 3s missiles, so the LB seems the best option and it can sit with my Clod. Looking forward to your next video. 👍
I realize you're probably keeping it as "Tamiya" as possible, but for top speed testing, why not use a racing style, non-reversing speed controller, low-loss connectors and direct solder the motor wires? These simple mods will improve efficiency (especially the ESC) and result in a noticeable increase in performance. If you go with a vintage ESC (Novak, Tekin, LRP, etc.), it'll remain period correct as well!
bunjy814 Yes your bang on buddy, it’s just that I’m swapping stuff over all the time to different cars. Once I’ve made the running video then it’s on to the next one 😬
I have the kyosho nikon 1/10 pajero evolution rally and i changed it with tamiya super motified motor but it does not yield as much as it should how i can i do what you did on video ?
CMW Chris woodward Excellent 😊👊🏻 Tbh I always use the standard kit pinion, but you can buy a different motor mount cheap off eBay which will allow you to alter pinions 👊🏻
Yep don't try the brakes that only results in flipping the van over. But that happens with my Hornet too. I fitted a core RC 15 turn motor and full bearings plus a 2s lipo and some Louise phantom tyres and I haven't put a Speedo on yet but it's very quick. However every time almost that I used braking the car would roll onto its roof or its side. Best way was too have plenty of road and let speed wash off before very gently dabbing the brakes or not use the brakes at all and not hit full throttle position. Besides with a Hornet it was going really fast without trying for Max speed and the car didn't really handle so great. Too light in the front and crappy suspension all round and it pogo stick bounces . I was thinking of adding some weight to the front but realistically I reckon I will just go back to a Tamiya sport tuned 23 turn motor and that will be more than enough. Best of luck man👍💪
TAMIYA Legends ok mate will have a look around Iv just finish lunch box and got he hang of controlling it do u have any ideas of a faster motor on the same esc I’m hooked and with you videos they help massive 💪🏽
TAMIYA Legends that’s a shame yes I’m running a fconegy 4000 mah 2s really pleased with running time and power , do u have any ideas what I could buy for a faster motor 👍🏽
CMW Chris woodward I think that speedo has a 27 turn limit from memory, so your really limited to what you can run 😞 You can use the Sports Tuned, but for the price it’s not going to make a massive difference. You could always buy a Hobbywing 1060 ESC, very cheap and run great, it also has a 13 turn motor limit. That would open up a ton of motors for you 👊🏻
Aarrrggghhhh.....that poor body!!! You did not want to scratch it but after seeing the car flipping over a couple of times I think you gonna need a new body!
I have a mamba max brushless that I run in my Slash, its a 5700Kv motor I run on 3S, I have fans on the motor and changed the gearing. it spins around 63K and sends my slash down the road at 61 MPH, was clocked by a police man that was watching me and when he pulled me over (lights and all) he said he could get me for double the speed limit since I was in a residential neighborhood.... I grabbed my beer and said, you can get me for a DWI as well..... luckily he laughed......
For speed, I'd like to see someone make an aerodynamic lunchbox shell, which hugs the whole body and conceals the wheels, and has the cabin lowered too, as there's lots of dead space in the top of the shell.
My original "Project Pumpkin" that I built in the late 80's uses a Trinity Triad 10T 50,000 rpm motor, Sanyo "pushed" nicads, and a Novak T4 ESC to handle the power. I shimmed the gears, used a Thorp Dirt Burners Blackfoot steel hybrid Counter-Gear, Team CRP Adjustable Motor-Mount to use a higher pitch pinion, a Miracle Speedway Racing Products Gearcase Strengthening Kit, and a custom wheelie-bar. Without the wheelie-bar, I could backflip the truck in place! The rest of the truck is completely tricked-out and runs great to this day! I ran it mostly off-road, which is a lot more forgiving than pavement, but it has always been one of my favorite R/C vehicles.
VIGILANTE
Wow that’s some setup my friend 🚗💨💨
I'll have to get it back out and take some photos and video soon.
Awesome
I did same thing in a way! Approx same motor on a Novak something I can’t remember now. Ran the hornet pinion.
At speed the front suspension collapsed and the pumpkin shattered into pieces! It was flipping for ever!
Glenn at the beginning: “This isn’t a bashing video”....Glenn midway through...too fun, what’s a few scratches!
Haha 😂 yes I do get carried away sometimes 🤣👊🏻
@@TAMIYALegends can you still get the Parma lexan replacement bodies? That would probably be better for bashing
I see what you meant about the 11t!!! Man that thing rips - I think I would keep to the grass if it were mine - that poor hard shell! Goes like a rocket, Glenn! Thumbs up my friend! :))
Crazy fast.. see you don’t need a brushless in every set up. Probably the fastest LB I’ve seen. I’m with you on not wanting to damage the shell. I spend way too much time on them that’s why I paint two.. one to drool on and one to stretch some plastic!
This was my dream Rc car/truck I read it’s magazine article probably hundred times when I was 8ish lol great vid thank u for ur videos
I did the same. I finally bought mine on Friday or Saturday. It's fun enough, but the suspension is the worst I've seen on any R/C car, and I've never had an actual kit before, only cheap cars from Sears and Radio Shack. If you've bought yours, hopefully you've been able to upgrade the suspension because it's really bad. It even sounds cheap when the shocks bottom out.
The wonderful mix of pain and joy as you roll it, but can’t stop hooning it about 😂 no one has the self control to keep it sensible with a modded lunchbox
... no bashing video... 😄👍🏻💪🏻
OK so I know this is an old video but I finally bit the bullet and got a lunch box. My daughter has started watching your videos with me. And as a result the lunchbox we have built is a fetching shade of pink. My question would be what is the best motor upgrade possible with the TBLE-04s speedo? Also thank you so much for keeping your channel family friendly.
My daughter who is 9 years old and autistic has started to respond to your into with comments like your welcome or no its my pleasure! And it truly is. Thanks again and keep on keeping on fella your doing a great job.
I had the Pidnight Pumpkin and I loved it the only thing bad was the hard body....always frustrated seeing all the scratches after a run....but so much fun these cars.
fleppie75
Yes the body’s don’t last long unfortunately lol 😂
Thanks for watching 👊🏻
Just catching up on all the vids on your new channel as I have been a subscriber for a couple of months. This was so fun to watch. Put a smile on my face seeing the lunch box run on that motor. Thanks again
santrade10
Excellent welcome to the channel and thanks for watching buddy 😊👊🏻
WOW ! Thought the tire was going to explode ! Good glue job !
Just ran her on a 2s standard rs540 set up. And wow. Wheelie at about 5-10 mph. Can't wait for 10.5t brushless. Already flipped and wrecked so ordered a midnight pumpkin for shelf lol.
You absolute child🤣... love it pal,👍👍
I almost cried when you rolled it.. I've sprayed mine and I know to get it perfect takes a lot of time.. arghhh..
Wow the tire balloon is crazy i see you got a esc with a cooling fan i just put one in my frog the tamiya esc couldn't handle a 17t with out overheating need to get the black body on that crazy box that way when you roll the scratch s dont show excellent video full watch👍👍💣💣
Adventure Time RC
Thanks buddy 😍👊🏻
@@philthyco1 yeah but the plus side to a off brand esc with a fan is most are water proof
@@philthyco1 what spray do you use i was wondering about that and the esc i got for my frog is a new rain its a cheepo but seems to do good ill do a vid on it when i try it in the snow soon
@@philthyco1 right i didnt know it was ocday thats cool it was dirt cheep and works great
dude that's like sticking 500hp in a shopping cart. You knew darn well the body was going to get destroyed! :)
Golden Manuever
Yes definitely a one off lol, not doing that again anytime soon 🤪🚗💨💨
Whoa! The motor is amazing! Surprised you had the stock bushings in the axle! Awesome to see it run!
Love a Box, but mine was silly on 3s with a 50A/3300kv combo. Will just stick to 2s in the interest of keeping it right-side up
Big Apple UB
I honestly can’t imagine it with your setup in 🤪🤪🤪
🚗💨💨💨💨💨💨
Please ,what is 3s,2s ?
I always run my pumpkin stock motor on 4300 mah nimh. runs fast enough for me:
@@kenhollywood4990 that's the battery rating of a lipo battery versus a nickle metal hydride battery. Lipo batteries are rated in battery cells. 2 S means 2 battery cells giving 7.4 volts. 3 S means 3 battery cells giving 11.1 volts . You know it's like the difference between a standard Tamiya 7.2 volt versus a 8.4 volt hump pack like used in the Big Wig or some modern day Traxxas Slash when they use a 8.4 volt 7 cell. You can see through the Traxxas battery casing and see there is 7 battery cells soldered together in series to give 8.4 volts output. But nickle metal hydride is a waste if time these days. For maximum performance go with lipo. Just make sure to buy a quality battery and battery charger to monitor and look after your battery and always put the battery in storage mode when not using plus not to overcharge a battery as they can be touchy. But that's the case with all batteries. All batteries can explode if overcharged. Storage mode is just lowering the voltage to a safe level when not using for a few days or an extended time and it's vital with lipo batteries. If you discharge too low the battery may not take a charge again . Make sure to ask some questions from your hobby shop and get some advice if needed. There nothing wrong with getting good advice when venturing into new ideas.CHEERS MATE.👍👌
That's pretty fast Glenn. I'm interested in a couple of things too like what radio are you using as it's been years since I've seen a stick control radio with an extending aerial. I know stick control radios are still around but these days they use 2.4 GHz and don't have a n extending aerial. And I noticed a mechanical speed control and resistor in there too but the mechanical speed control wasn't moving so that looked like for display nostalgia purposes 👌 I like your thinking there. And where did you get yourself a Tamiya super modified 11 turn motor. They seem pretty rare these days, maybe discontinued? Lastly have you put a Speedo on to get a speed reading ? I would be very interested in top speed. I must say the sight of the rear tyre ballooning out when you only let one tyre spin was SCARY ! I probably would have worn some safety specs doing that. You never know mate. Like do you remember Robert Wagner when he was in Austin Powers Gold member and his character was number 2 or maybe number 1 ? And he had an unfortunate experience with a male enhancement aid behind a curtain with a light and shadows? Then after that he required an eye-patch ?? It was hilarious 🤣🤣😂😂 But it could happen when a tyre balloons in that way. Quite scary to see them ballooning out like that. Love your work Glenn 👍
I rewatched this video because i got myself one, I'll be building it this holiday break
It's going to scream with that Super Modified 👍👍👍👍👍👍 You just have to slow down before turning ha ha ha!
That thing is awesome, I have a Midnight Pumpkin (was chrome model but now red bull) I need to do this! Also terra scorcher I have too needs some mods!!
Absolutely awesome
It's quick! Mine has a 12T Titan and it's a real handful 😯
Nikki Tomas
Yeah I think it was a little too quick for it lol 😂
Impossible! The faster and sillier the better! 😆
A girl with a 12turn motor lunchbox? If your single I know someone.
I’ve got the exact same motor in my lunchbox and I can honestly say it’s scary fast I paid a lot of money for it and it was worth every penny
Back in the late 80s I put a 14 turn Tony something in my Kyosho Javelin and it took it. I had the belt drive conversion and my only issue was melting the connectors on tamiya plugs. They couldn't take the power transfer. Battery lasted like 8 minutes. lol But it was fast and fun.
Oh my! That is scary fast! Have you considered a test with a Lipo? If you do, get a used body for testing! I cringed on that first roll over. Can't imagine how that made you feel. Hope the body repair was minimal. As usual, thank you for your videos. I enjoy each one and learn a ton! Happy RC'ing!
That’s a little badass right there, thanks brother
Thanks for watching buddy 🤩👊🏻
Takes me back, I’m digging my pumpkin out my mum and dads loft. Had a Parma cyclone 2 fitted and it was awesome back in the early 90’s- reckon a new ESC and new spec battery pack are calling !
Hey Glenn, question. Got the lunchy kit coming from our friend the infamous elf. I’ve got a 21t Holmes hobbies motor. Do you think that’ll be too much, or will it be ok? Mr elf thinks it may be too much for it. I’m asking opinions on this. I’d like to do something more than the stock silver can but at the same time I don’t want it to be uncontrollable
that's so cool bro i love your video please keep it up that what's up👌
😁👍Flying lunch box!
Thank you for showing me how to tune that motor, truly.
nevermore
Thanks for watching my friend 😊👊🏻
I am hooked on your shows. i really enjoy how carefully you enplane how or what it is you are working. Have my case of beer, RC cars & tools, going to binge watch your shows till I pass out or day breaks so i can put what i have learned out the road with these RC's . Thank you once more.
That's nuts! looked like great fun tho ... And was that the Hot Fuzz parked up? making sure you wasn't breaking any speed limits with the Super Modified 😁👍
Jonathan Payne
😂👊🏻
Hi I was thinking of pairing the lunchbox with a hornet pinion and the TBLM02S 10.5 T, would this work?
I used to run a lunchbox at my local club meeting back in the 90's
18×2 with a 23 tooth pinion, electronic Speedo, and 1700 scr battery (if I remember correctly)
Stupidly quick, and I beat many a 2wd buggy lol.
Steve Newhouse
Love it 😎👊🏻
Very cool. What's that motor control unit called?
Wow...amazing motor...
Jack The Lad
Yeah I need to find another one 😊🚗💨💨💨💨
So did you ever strap your phone to the bumper? If so, what was the top speed?
What year was the LB re-released?
wow not seen a pad with a channel chip in years same one i got with a subaru i had years ago as a complete kit
Action pure! Yess!
Great Lunchbox, are you going to to any upgrades? There is a great upgrade for the steering on Shapeways.com, it will bring the steering into proper double wishbone with the cc01 modifications and you really should upgrade the shocks to the ones suggested in the instructions. Anyway, great video.
Funny to watch. But you need to do some upgrades to the chassis before putting in a fast motor like that. Ball bearing in gearbox would make it run smoother and quieter
that thing is mental was that with a lipo? I am thinking about buying one of these for my lunchbox but with modifield front suspension and oil shocks
adrian harrison
That was actually using 7.2v Nimh 😊👊🏻
I have to try one of these, wonder if there is any way to use two in a clodbuster..
I remember my first tamiya tl01 subaru I put a 13t in that and it melted the bushings in no time. You need bearings!
Hi can i ask what esc you used?
Always interesting experiments~
😄😄😄
karma shift
Thanks buddy 😊👊🏻
I’m after an esc to power the same motor but I don’t know which one to purchase I’m kinda new to this hobby I’ve also got the lunchbox it’s great fun just want more power 😃
Lol new name for the truck..Mr tumble..
Nice and interesting job! Cheers
Glenn, What was that ESC you were using? I have a few of these motors that I’m going to be putting in my egress, Avante, and vanquish, is it any good? Can you recommend a good ESC that will handle that motor with a fan and fit in the chassis?
NY ISLANDER313
At that time I was using a NewRain 320a ESC. But I’m on the lookout myself for something else after I blew the one I had 😭
Those motors run great my friend 😊👊🏻
TAMIYA Legends I have been pretty satisfied with the hobby wing 1060”s For all of my 23T Tamiya motors but it doesn’t go that low of a turn, since that motor is an 11 T
NY ISLANDER313
Have a look at the 1080, I think that might run it 🤔
Sorry I got that wrong it won’t run that motor 😬
Cool vid and review of the 11T! may I ask about long term: does Lunchy hold up to brushless power? My mate is telling me to go for 23T RZ rather than brushless for fear that the car cannot handle anything more? Any thoughts please?
Yeh I reckon you should go with the super stock RZ motor and that will be fine. Brushless motors are overrated anyway. My Super Hot Shot with a super stock RZ and 13 tooth pinion gear using full bearings and running a 2 S lipo nvision battery plus Louise phantom tyres and wheels gives me a speed of 27 mph which is 45 kmh. I reckon that can be improved on too. Like by removing some grease from the gearbox and differential as I put eat to much in when building. Plus the Super stock RZ motor has got adjustable timing. Some may argue otherwise and Tamiya may say otherwise but the end bell where it screws to the motor can has measured graduations / increments or timing numbers. So it's definitely adjustable. So is a Tamiya GT Tuned motor. The reason I used a 13 tooth pinion gear is because the Super stock RZ motor winds out to 27500 RPM and to take advantage of the power band but I think somewhere inbetween 13 tooth pinion to 15 tooth pinion gear will also lift top speed slightly more. So with brushless the timing is controlled on the ESC and not adjusted on the motor can itself. I'd say stick with a Super stock RZ motor or even a GT tuned Tamiya motor. You will be more than happy with the performance 👌💪
What a weapon haha! :P
Hey Dude. I've just found your most excellent channel and subscribed.
I have lots of modern cars and feel the need to have something different and older.
I'm thinking Lunchbox, Pumpkin or Hornet.
You've probably been asked a hundred times but which parts make a SuperHornet special?
Thanks
Grumpy Granddad Stinky’s RC Dump
Hi thanks for watching 😎👊🏻
Out of the cars you mentioned the LunchBox is by far the most fun 🤪
The Super Hornet is completely different from the Original and is much better, better suspension and better wheels and tyres, but it’s still an old buggy so the handling isn’t great.
If you look at my channel videos I recently restored one and ran it 😎👊🏻
Thanks for the reply. I was thinking along the same lines but I'm bad at making decisions.
I might be disappointed with the Hornet against my brushless 3s missiles, so the LB seems the best option and it can sit with my Clod.
Looking forward to your next video. 👍
What happend 😂😂😂
Looks like a hell lot of fun, i would wheelie it all day long. Nice vid💪🏼
Whoa!!!! Wholey sh**t hahahaha 😆 how much fun!!
You got some good speed my brother
I realize you're probably keeping it as "Tamiya" as possible, but for top speed testing, why not use a racing style, non-reversing speed controller, low-loss connectors and direct solder the motor wires? These simple mods will improve efficiency (especially the ESC) and result in a noticeable increase in performance. If you go with a vintage ESC (Novak, Tekin, LRP, etc.), it'll remain period correct as well!
bunjy814
Yes your bang on buddy, it’s just that I’m swapping stuff over all the time to different cars. Once I’ve made the running video then it’s on to the next one 😬
Could someone please tell me what esc that is I have an 11t yokomo motor
I have the kyosho nikon 1/10 pajero evolution rally and i changed it with tamiya super motified motor but it does not yield as much as it should how i can i do what you did on video ?
Αγαπιος Χριστοφη
You need to advance the timing forward, but remember if you do that it will use your battery a lot quicker 😬
how fast did it go with this set up?
wayne johnson
Unfortunately I didn’t gps it, but I’d guess close to 30mph ish 🤷🏼♂️
@@TAMIYALegends nice one, ordered the tamiya 10.5t brushless and 2s lipo for mine. I think it will be a hand full.
Haha, awesome. Crazyness, just what this car was made for, no? That said, now I'm really gonna get my LB back out :)
(stock motor)
Just picked up first lunch box whats the best tooth to fit on stock motor , good video for advice
CMW Chris woodward
Excellent 😊👊🏻
Tbh I always use the standard kit pinion, but you can buy a different motor mount cheap off eBay which will allow you to alter pinions 👊🏻
TAMIYA Legends thanks for your advice , can’t wait to get it built now , top man thanks again cracking video 💪🏽
insane speed, so basically, no braking allowed , only the dissipation of speed- I'm hoping that stuff will buff out
Haha absolutely no braking my friend 🤣👊🏻
Yep don't try the brakes that only results in flipping the van over. But that happens with my Hornet too. I fitted a core RC 15 turn motor and full bearings plus a 2s lipo and some Louise phantom tyres and I haven't put a Speedo on yet but it's very quick. However every time almost that I used braking the car would roll onto its roof or its side. Best way was too have plenty of road and let speed wash off before very gently dabbing the brakes or not use the brakes at all and not hit full throttle position. Besides with a Hornet it was going really fast without trying for Max speed and the car didn't really handle so great. Too light in the front and crappy suspension all round and it pogo stick bounces . I was thinking of adding some weight to the front but realistically I reckon I will just go back to a Tamiya sport tuned 23 turn motor and that will be more than enough. Best of luck man👍💪
Please tell me mate what exactly is in this! I want to do it to mine
Crazy speeds. Awesome 🤘🏻😎
Can i ask what's the make of the esc and where did you get it from
dustine puttaert
Hi,
It’s a New Rain 320A Brushed unlimited, does Nimh & LiPo’s. I got mine from Hong Kong, I believe there on eBay 👊🏻
AWSOME
Is it possible to find this motor
Omg that’s fast 💨
What motor is that mate will it work with a tble02 stock tamiya esc
CMW Chris woodward
Hi,
No unfortunately not buddy, you’ll need to get a unlimited Brushed ESC for this motor 👊🏻
TAMIYA Legends ok mate will have a look around Iv just finish lunch box and got he hang of controlling it do u have any ideas of a faster motor on the same esc I’m hooked and with you videos they help massive 💪🏽
CMW Chris woodward
That speedo doesn’t run many motors, are you using 2s Lipo batteries?
TAMIYA Legends that’s a shame yes I’m running a fconegy 4000 mah 2s really pleased with running time and power , do u have any ideas what I could buy for a faster motor 👍🏽
CMW Chris woodward
I think that speedo has a 27 turn limit from memory, so your really limited to what you can run 😞
You can use the Sports Tuned, but for the price it’s not going to make a massive difference. You could always buy a Hobbywing 1060 ESC, very cheap and run great, it also has a 13 turn motor limit. That would open up a ton of motors for you 👊🏻
Perfect motor for that thing..
Could you provide a link for that Rain ESC?
kasparov9
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.ca%2Fulk%2Fitm%2F123597442628
That was some serious ballooning for a mere Lunchie!
Muahahahahahaha
Aarrrggghhhh.....that poor body!!! You did not want to scratch it but after seeing the car flipping over a couple of times I think you gonna need a new body!
Love this 😂👍👍👍
Ps, in the comments guys are saying things like 3G,2G etc,what is this ?
Sorry 3s etc🤪
Ken Hollywood
It’s referring to Lipo batteries, 2s & 3s are 2 cell and 3 cell buddy 👊🏻
TAMIYA Legends many thanks Legend ,I’m a little to “old school “ for my own good 🤔
@@TAMIYALegends technically it's 2 cells in series... so a 3s-4p would be 3 cells in series with 4 cells in parallel... which would be a bitch tbh :D
According to my GPS my lunchbox ballraced does 12mph with the Silver Can and 16mph with the sports tuned both on Nimh.
"this is gaunnie be fun, This is gaunnie end in tears" Buwhahahaha!
Blimey, how much did those tyres grow on the bench test ! Brutal !
our cars did that all the time back in the heady days when we were racing
That’s one fast lunchbox!!!!!
dear god ................how fast do you want it ???? orbital trajectory by the sound of it . You can see the back tyres expanding like a fueller !
Lunchbox forever, habe 2 Stück.
Verry nippy
David Turner
Yeah I really liked this Brushed Motor buddy 🚗💨💨
I have a mamba max brushless that I run in my Slash, its a 5700Kv motor I run on 3S, I have fans on the motor and changed the gearing. it spins around 63K and sends my slash down the road at 61 MPH, was clocked by a police man that was watching me and when he pulled me over (lights and all) he said he could get me for double the speed limit since I was in a residential neighborhood.... I grabbed my beer and said, you can get me for a DWI as well.....
luckily he laughed......
John K
Love it John 😂👊🏻
And that is one serious fast set up my friend 🚗💨💨💨
Thanks for watching buddy
Lmao good one 👍
American police car?
Wolfgang Kovac
Canadian 🇨🇦
Thanks for watching buddy 👊🏻
swear i saw a vid of yours explaining not to adjust timings under load.....
thesmf1210
You definitely did buddy, that video came after this one 😬
Dude I run my pumpkin on 3s..with a few mods😉...upsets a lot of people....🇬🇧👍😎
Haha excellent Mark 🤩👊🏻
@@TAMIYALegends thanks for the reply 👍..just subscribed with you tonight,got some catch up to watch 🇬🇧😎
HAHA that's crazy! :D
Think I’m gonna dig mine out
Lunchbox is gonna grow wings lol
STEVO D 313
I think it was a bit much for her 😂👊🏻
So what's the top speed?
Pichardo Gabriel
I didn’t bother lol, I was gutted I damaged the shell 😂👊🏻
@@TAMIYALegends I'm wondering if it's faster than the Tamiya sport tuned motor
Pichardo Gabriel
Seriously?
It’s 38000rpm 👊🏻
For speed, I'd like to see someone make an aerodynamic lunchbox shell, which hugs the whole body and conceals the wheels, and has the cabin lowered too, as there's lots of dead space in the top of the shell.
I have got a lunchbox but only put proper bearings in it so far, but i''d like to beef it up one day, just to see how much faster I can make it.
👌👌
How to make a lunch box scream like a wounded animal . I backed off from the screen when you were bench testing and the tires ballooned.
Matt Franks
🤪🤪🤪
Very cool❤ (top speed please😊
😊)
Geil.
I had a clod buster growing up
Glenn: ".. I spent too much time on this to trash it .."
Lunchbox: ArE yOu SuRe AbOuT tHaT ...