2007 YZ250 Full Rebuild
ฝัง
- เผยแพร่เมื่อ 28 พ.ค. 2024
- Hi All,
Here we have a 2007 YZ250 that got an overhaul. Every single nut and bolt was gone through and either cleaned or replaced with new OEM parts.
- Revalved Suspension (Race Tech Gold Valves) forks and shock.
- Top end rebuild with new OEM cylinder
- New Xtrig clamps
- Various Lightspeed carbon fiber throughout the bike
- New FMF system, Raptor footpegs, Vforce, bearings, lots of OEM parts, etc
- Finished off with the updated new OEM plastic kit
Instagram: @moto.scrub
0:00 - 0:43 Breakdown
0:43 - 2:20 Frame
2:20 - 6:42 Engine
6:42 - 11:54 Suspension Forks
11:54 - 16:34 Suspension Shock
16:34 - 18:23 Carburetor
16:34 - 20:40 Airbox/Swingarm/Misc
20:40 - 25:29 Build
25:29 - 27:34 Finished/Walk Around
27:34 - 28:12 First startup
28:12 - 29:45 Pictures
Hope you guys enjoy!
Thank You,
John
Instagram: @moto.scrub - บันเทิง
Ex mechanic, rider and ocd like you wouldn't believe! your builds are some of the cleanest most in depth I've seen online some great work man sending some appreciation from the other side of the pond 🇬🇧
Appreciate the kind words! Cheers!
Esta muy bien 👌
On on peut trouver ce kite déco svp ?😊
Lol you sound like me. OCD hard 🤦🏻♂️ but I wouldn’t have it any other way. Retired mechanic but still restoring my own cars and motorcycles, about to but myself a 2007 yz 250 thats low hours, but im sure il strip it and well.. you know how it goes 😂 from Australia 🇦🇺 buddy Happy New years!
I’d kill to find a channel that did full blown video tutorials on all things dirt bike mechanic related. Like how to rebuilt a top end, carb, pulling bearings, etc. with explanations on why you do certain things etc.
Would be so helpful
I future say.. I'd love to find a channel. There is no need to kill anything
@@cw3728 it’s a figure of speech, but I’d ACTUALLY kill to make you stop talking.
@@islanddoggear I understand American, but I make you sound feral and savage like a south American! Just trying to teach you a bit of etiquette, you'll go further.
And I thought my low hour 07 YZ250 looked good 😂. Your build is amazing!
Extremely clean job !🔥
Fender’s waggin’, she’s a happy girl!
Still riding my 07 and loving it.
Wish kids these days understood how having something simple and clean is the way it should be. Not all the over the top flashy garbage.
To each there own man alot of people enjoy building bikes makes them care more about it instead of just beating the crap out of it and destroying it
Man nice video! Building bikes is so rewarding, I just rebuilt an 02 CR250 and enjoyed rebuilding it just as much as I like to ride it!! Me and that vapor blaster would be best friends if I had one!
Потрясающая работа, браво ребята!
High quality workmanship! You are a true craftsman! 👍 Very nice!
Appreciate it! Thank You!
The colors scheme is amazing; the rims, plastics, pipe, triple clamps, and bars on top of all that perfectly restored parts look crazy good! Good job man, love the content👍
Great vid , no one was talking the whole time and it was at perfect speed to watch and not get bored , subtitles were nice touch too , I watched this while I ate thanks bro
Haha awesome. Glad I could make your meal that much better! 😁🤘🏻
amazing build man, love the oem and a bit of the aftermarket style
Glad you like it! You have good taste. hehe
Best yz build on TH-cam period!
Awesome video!!! You make it look so easy. You have probably forgotten more than I will ever know. Fantastic job!!!!
Thank You, I appreciate it! haha
I just went through my ‘16 with a comb and yours makes mine look like its been thrashed with that vapor blasting. I would love one of them some day for builds.
I just rebuilt a Pro Circuit suspension-ed (front and rear) 2003 YZ250. Love the power of YZ 250s.
that was amazing. keep up the great work!
super clean , bike build and video!
Beautiful mate! Awesome job 👌😍
Love the build 🤙
Beautiful, Beautiful bike. Your work is exceptional!!!!!!!!!
Thank You!!
Awesome, bravo what a clean work ...
You are a great mechanic! 👍
Thank You!!
Una belleza de restauración y excelente moto YZ250
Outstanding!
First thing I noticed is the darker blue rims, awesome choice 😎
Wow, good eye!
Daamn what a clean build, well done🤘
Thank you, Glad you liked it! 🤘🏻
@@MotoScrub I'm going to look at a 07' yz250 that's all OEM and never rilly had maintenance done to it...$4K for the bike then gonna strip it down/rebuild n rip to 99% of your build n parts🤘
@@MotoScrub any pointers on the 07' tear down/complete rebuild to be aware of ??
So clean!
Great Job dude....that' s awesome.....
Good job! It was my pleasure to watch this video! Regards from Germany
I'm glad you enjoyed it! Cheers!
Nice job man!!! A bike like that in Brazil would cost a fortune R$$$$$$$
Thật vui khi được xem sự phục hồi chiếc xe một cách thận trọng, cảm ơn bạn
Great build !!!
Thanks!! 👊🏻🙌🏻
I can't believe how incredibly bad ass this is....extremely nice e job man. ..
Appreciate it! Thanks!! 🤘🏻
Sharp. Nice ride briggity braap
Sweet nice job!👌✌️
wow so clean
my dream !!!! nice job
YOU JUST GET POEPLE WHO CAN DO THE JOB..... REALLY RESPECT 👌👌👌👌💯💯💯💯👍👍👍👍
Appreciate it! Thank You!! 👍🏻🔥
Very good mechanic
Thank You! 🙌🏻
Very nice !!
Nice work 💪
Thank you very much!
Amazing. .good job.....
Im about to find me a similar year/frame of yz250 and do a stock-mod build...only new bike on my local yamaha showroom floor is the yz250X...super sick build you did🤘
BEAUTIFUL BEAUTIFUL 😊
amazing!
Nice
My therapy no doubt
Wonderful
Amazing
Awesome❤
Fire...🔥🔥🔥🔥🔥🔥🔥🔥👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻🤞🤞
You just got a new sub! Great content and high quality! Do you vapourblast your engines fully assembled? If so, what do you do to prevent any media to enter the engine. I see this topic all the time on forums and fb. Greetings from norway.
Thanks for the sub, glad you enjoy the content! ^^
Regarding the motor blasting. Yes, it was blasted whole. I take great care in blocking all the areas that can get media/water before blasting. If you do it right it can be done!
Insha Allah suatu saat nanti gw juga bisa beli ntah kapan
Top de mais parabéns 🎉
Good nice
Thats a sik bike. I'd kill for the shop though.
Muito bom , eu aqui do Brasil me inspiro em você
I wished , theres a man who sent me like this beautiful dertbike....I wish........
clean build , new subscriber here/
Thank you for the sub! Hope you enjoy the videos 😁 🙌🏻
Hey! can you tell me what are the wires/sensors coming from the carburator of the yz?
did you vapor blast motor while it was together ?
piękna sztuka
Absolutely love the build! great job on it. I'm very curious though. Did you vapor blast the engine while assembled then just replace the top end? I reached out to a few places to see if it could be done when I was building my rm and they all refused. Is this something you've had good luck with? Again, great work!
Thanks for watching! Yes, the engine was first blasted whole. Then the top end was done afterwards. Have blasted many whole motors, it is critical to block/mask all open areas before blasting.
awesome job really enjoyed the video. How many hours would you say total?
WOW!
what are those electronic cables on the carboretour?
Can someone tell me what year the plastics are meant to fit? I have an 07 that I need to order plastics for and I’d love these.
bro what tool did you use to remove that bearing sleeve?
Awesome work!
Thank You! 🙌🏻
Hi. Why do you change the piston? Thanks
What do you use to vapor blast
hello where can i find the wrench you used to remove the steering bearing? Congratulations for the video. Greetings from Italy
Motion Pro - Steering Stem Tool
I highly recommend it! Makes the job so easy and painless 👌🏻
Hello, I have mounted a fatty and shorty fmf exhaust on my yz 250 23, my question is is it protected with the 50 n3ew pos 2 series carburetion and 178 main jet, or should it go up to 180, thanks in advance
Love the build!! Where did company did you get the decals from? Much better quality than what I've seen. Mahalo!
Appreciate it! The graphics are Yamaha OEM 👍🏻
Damn bro I don't even want to know what you paid for the Yamaha hardware.
Usually go to the hardware store. I went to the dealership to get clutch basket bolts for a Fireblade. They were 4.95 a piece and not even hardened?!?!!?🤣🤣🤣
Took my ass straight to the hardware store. Even if I got it I'm not giving it to them.
Highway robbery.
I understand why you do it, just laughed out loud when I seen it all sitting there in a pile.
The first question I asked myself was "how much did that cost"!?
Excellent work buddy. Love to see other human beings take the time in what they do and do it right
The bolts are from "Spec Bolt". They make model specific kits for engines, body work, etc. They even have different finishes! Much better than the mismatching hardware store bolts 😜
I have 07' yz125 I was wondering what year plastics are
Very cool build man loved the video, just a question, what year were the plastics you used and can I use any year for my 09’?.
For your 2009. As long as you use the updated airbox (2015+) you can use any 2015+ plastics. Rear fender, side number plates, and shrouds.
Front fender and Front number plate were Cycra restyle plastics.
@@MotoScrub what about an 05 does that work too?
Good job👍 . The wiseco piston why Changed with original ?
Customer had just purchased the bike and did not know the condition of motor. Bought new parts for piece of mind 👍🏻
how much did u buy the bike for? and how much did the rebuild cost?
What solvent did you use to clean the frame it came out amazing?!?!
The solvent is any normal cleaning product, nothing special. The frame looks the way it does because it was vapor blasted 👍🏻
I've got a '02 426 i want to rebuild like this but its sooooo daunting when the most you've ever done is replace a carb on a lawnmower...
It's pretty easy just take your time and use the manual
When doing the forks was you not worried about mixing from left too right with some of the internal components?
The left and right almost always have some kind of small knick or something distinguishable. Even if you did switch them though, the internals are the same left and right. 👍
What is name of the shock oil you are using and what is its viscosity level bro
From indonesia
What were you doing at 4:33 ?
Great work, What rear brake spring are you using?
Thanks!
"Fasst Company" rear brake return spring. They offer different colors too 👍🏻
What motion pro tool steering removal and install kit was you using?
- Motion Pro Steering Head Bearing Race Driver
- Motion Pro Steering Head Race Puller
👍🏻
how do you know all of the rubber seals to get when rebuilding the forks and rear shock? is there a kit sold somewhere with everything? preferably kyb brand
What bike do you have?
Yes, there are rebuild kits that will included the parts you need for a rebuild.
@@MotoScrub 2014 YZ250 2 stroke, I need to do the forks.
How much did you buy it?
How much did you spend on it?
And how much is it wort now?
Ples i will be relly happy if you can anser me this questions
❤
What was the setup you used to pull the steering head bearings?
Motion Pro - Steering Head Race Puller
Highly recommend! Makes it so easy..
CR 250 next plss
Nice work. Bet that cost a few bucks.
How much did it cost you for the full rebuild?
Either a Yamaha yz125 or a yz250? Please let me know what is the quotation and the price
is it for sale?
Jealous of that bee
should've left that Wiseco piston in it. Forged pistons are are far superior to the junk OEM ones
Hi, you are amazing, I am a mechanic and I wanted to know the name of the tool you used to remove the steering gear. If you have the link, even better, thanks in advance.
Thanks! I believe you are asking about the steering race remover..?
Here's the link: www.motosport.com/Motion-Pro-Steering-Head-Race-Puller?variant=MOP00BE-X001-Y001&variant[MOP00BE]=MOP00BE-X001-Y001
Makes the job super easy! Good luck!