Turned into a tricky job like most do when we know what we want do but stuff gets in the way. I'm pleased you persisted; clearly shooting the tire and bolts also failed. Bit sketchy; you are worth more than our content so be safe! Regards from Eyre Peninsula, South Australia.
Jt looks like you have the same mess while working on something. What should be fairly easy ends up being absolutely as difficult as it can possibly be, so good luck brother.
Glad to See the New-Ladder Finally Getting some LOVE...and That PEACEMAKER next to Garage-Door has Me Wondering if You were about to SHOOT the Wheel&Tire OFF of the 1800!!?...No-Wonder why FLUFFY Doesn't Hang-Around much...She probably Knows You are TRIGGER-HAPPY💥💥💥😱
JT you’ll have to show us some more detail on just how that rim mounts to cause it to stick like that. I own John Deere and a Farmall M , those drive wheels are mounted with lugs. Great job so far.
I watched the whole video and it moves on to the next one before I can post. Anyhow a great video and a very tuff danger-est job. best thing you did was buy that fork lift. message to self next project fix the jerky clutch.
If you drill or torch some holes a few inches back from the tip of your forks you can put a clevis on them and use it as a crane. The clevis will also stop a ratchet strap from slipping off the end.
JT I got to give it to you the ending was not only funny but creative. I really think Hollywood is under serious threat from You Tube creators like yourself. As Harold from ARW would say KO-KO (Keep on Keeping on.) .
Hi JT it would have been a cool project to see you fix up The Mello yello she lifts pallets and tires and all sorts of other things she deserves some tlc🥰😀😀😀
Hey Joe,,,so,,where do we start?? The 1800 is gonna turn into a grumpy old bastard. Otis is earning his keep. The shop is perfect. The gunslinger is laughing his duals off. Hot chick's and gunslinger. Definitely blue mountain madness. Cheers buddy 👍
Great ending and I guess after all those years she just did not want to give up her wheel as for the rain we are the same way here in Tn buy that is ok it’s better then 30 miles from me they had tornados keep up the great videos .
I'll tell ya, I'm weirdly excited about this project for whatever reason. Grew up driving masseys (1100 and 175gp) All those wood blocks remind me of putting away the 1100 after mowing jobs because you never know if you picked up a small leak at some point. It kept the frame up in case one ran flat overnight. Thankfully never needed it.
Excellent video JT :) also yes some tire get of rims & putting back task to and have had my share to included! I said to lots place work for doing tires said owners run should be took off and on lots for 5 years for each tires of any vechiles so be easy to do when needed repairs or replacement! Yes be costly but much better and to less problems!
If that tire really is the original to the tractor it's no wonder that it wouldn't come off easily. That's more than just rust at this point, it's fused on there. As the project gets frustrating remember how much easier it is with your new spacious shop, your smooth concrete floor, and your forklift for mechanical assistance with heavy parts. I'm looking forward to seeing the old girl all dolled up.
I feel your pain, I've managed to do my burn down spray and that's it, ground isn't solid enough even with duals and can't dry with all the rain this spring.
Nice one j.t. you need to save up get a over head crane to make your life easier. Get yourself a hydraulic power pack save you so much hassle and they can do so much for you. Great video as normal. From Andy in uk
Thanks for sharing JT. I feel your pain. Hard to do everything on your own and that is what I unfortunately have to do. As soon as you brought the forklift into the picture, I thought, wow, smart buy and glad JT took the time to get that up and running. Smart move. I busted a gut at the end. Enough so my wife came over to see what I was laughing about. Have a blessed weekend.
If you don’t mind my asking about how much does it cost to have a tire like that removed and replaced? The forklift may not be perfect but wow what a genius purchase that has turned out to be. That last bit at the end was hilarious dude😂😂😂 I was dying. Be safe out there JT.
man ive done that same kinda shit with you did with the JD in tough situations even though its not what u want to do in the first place, hopefully the hulkamania shirt gave ya a little boost moving the heavy tires lol , looks like the forklift is already paying for itself so that awesome too! nice work !
Clean and do the cabs interior on this one ,,its worth it I would say if everything else cks out great ,as you go thru it,,paint up some of your parts in the barn shop leaving your new one open for more service work and teardown,and so to keep the paint off the floors😊
Geez J.T. you must be having a bad day. I was just messing with you. I sold tools for 40 odd years and believe it or not, there is a difference. A claw hammer doesn't have as hard a face as a ball peen. It's made for driving nails. A ball been hammer is made for hitting hardened surfaces. Anyway, I like your videos and lately I've noticed others besides yours where folks are using the WRONG hammer. I say it for your safety. A claw hammer might chip more readily than a ball peen and you only get 2 eyes. Anyway, have a great day and please do keep up the great content. I like it.
@@jtsbarnngrill6873 Do you have any tool trucks that come by anywhere around you? And I don't mean Matco. Snap-On, Mac or my favorite, Cornwell tools all sell great stuff. If you buy cheap tools, you will just have to buy them again. Anyway, to my point, run down one of those trucks and buy a couple of the popular sizes. 12, 16, 24, 32. ounce. They will outlive you if taken care of. My preference is wood handles. I always wrap the handles with duct tape from the head down to just above where you would grab it. That will save the handle if you miss your target. You won't regret it.
@@jtsbarnngrill6873 Well of those 2, I'd opt for the Snap-On. A bit pricier but they are always around. No matter where you go. Cornwell is the oldest tool company but still employee owned so they are growing a bit slower. The quality is right up there with Snap-On though and quite a bit less money. Igf I knew where you were located, I'd try to get a truck to stop by.
Dad bought a Case 4690 a while back, then turned around and bought a 4890 with a bad transmission too. I asked why? Turns out the 4890 had the wide rims already added like you have. Dad said the factory 18.4-34 tires were $1200 each plus $300 tubes and the big ones were basically free at the junkyard off combines. He had a company come out and do his, because he knew it would be a fight to get them off the rims. The cost of the tractor was equivalent to the cost of the four new 18.4-34 tires!
As for the RR ad on the end. Don't worry JT. Rolls will haul 2 people, so wil the MAssey. A lot of that fancy finish material sounded like plastic, compared to the rusted steel and aluminum on the Big Girl. That Royce won't haul 15000 lbs. EVER! Both will take yer girl to the lake. The Fergy will pull the RR out of the lake. The Fergy will pull the RR into the lake, and laugh. The RR will slowly drive away from the lake quietly, calmly over gravel roads. The Massey will sit quietly, playing Nitty Gritty while you and the little honey, do a little "Fishin' In The Dark." Ifffin you know what I mean............ And a second thought, Take the forklift, lift the tire back up straight, put a stump where the center piece would sit, knock the wheel back over. Weight and a force in motion. MAybe, pop that center right out. Just a thought.
Well it, as they said in the movie, " you may have to reevaluate your decision making paradigm"! Farming and old tractors??😅 Why do men find satisfaction and humor in another man's struggles? Been there?? That's for making me smile!
Good Morning J T ,I'm thinking it's a lot safer that you didn't take all the wheels off at the same time. I once saw a guy remove all the wheels from a grain trailer, dollied down in shop, Whoops, the whole ass end fell off the blocks, luckily no one was hurt. Have a Great Day. 😊
Tough going there JT but all the swet blood tears and grunts the end results be awesome i agree sooner have a massey ferguson than a rolls royce evertime 👍🏻👍🏻
The best part of this video is the last minute!!! Pure and utter hilarity.
Thanks!
Love your outros. Makes me laugh all the time.
Right on! That makes me happy!
That old forklift is gonna be the handiest tool in the shed! The best buy you’ve made yet…
I agree!
That forklift is really good for saving your lower back from long term damage. Makes me want one myself. 👍
Tell ya what, that thing gets used 3-5 times a week!
Humor is exceptional 😂😂 ! What a struggle with that tire glad you got it off hope the others come off easier .
I hope so too! Thanks!
That old forklift is turning out to be a great investment . You be carful . Great video JT 👍
Thanks!
That forklift was such a good purchase
Right! I gut my money worth from it lol
That Rolls Royce/ Ferguson skit at the end. I'm dead 😂😂😂
😆😆😆
Good to see Otis the forklift [named after the lift company] earning his keep. Thanks for sharing
You bet! That is one handy machine!
@@jtsbarnngrill6873 We painted lines on the so we knew how close to the doorway we were. Once the lines line up it's time to stop going up.
on the sections of the mast sorry for leaving that out
Right on. That’s a good idea!
That forklift was such a great investment.
I use it all the time!
All hail the all terrain forklift
👍🏼😆😆
Turned into a tricky job like most do when we know what we want do but stuff gets in the way. I'm pleased you persisted; clearly shooting the tire and bolts also failed. Bit sketchy; you are worth more than our content so be safe! Regards from Eyre Peninsula, South Australia.
Thanks! Careful is my motto 😉
being around vehicles from back east that lovely salt, would loosen the lug nuts and roll the vehicle forward or backwards a few inches
Right! The tire place got it, but they had a few hours in it
Best welding rod around. 52 years rust & gunk. 👍👍👍👍
You got that right!
Jt looks like you have the same mess while working on something. What should be fairly easy ends up being absolutely as difficult as it can possibly be, so good luck brother.
That’s the way it goes 😆. Sometimes I have those days lol
Glad to See the New-Ladder Finally Getting some LOVE...and That PEACEMAKER next to Garage-Door has Me Wondering if You were about to SHOOT the Wheel&Tire OFF of the 1800!!?...No-Wonder why FLUFFY Doesn't Hang-Around much...She probably Knows You are TRIGGER-HAPPY💥💥💥😱
JT you’ll have to show us some more detail on just how that rim mounts to cause it to stick like that. I own John Deere and a Farmall M , those drive wheels are mounted with lugs. Great job so far.
Right on! The tire place got it free, so I’ll be doing that next week
It ain't that easy J.T.
Working alowne ain't bad but not always easy. 😉
Keep it up J.T.
Wish you a nice weekend.
Greetings, Marc. 🤠
Right! It ain’t always bad 😉
You should have had fluffy helping with the tire. Then you wouldn't have been alone. 😊
How you did that ending with a straight face? I'm just waking up and lost my shit laughing!😅
😆😆. Right on!
MF going to hire JT for their next ad.
@@northdakotaham1752 no doubt!
I watched the whole video and it moves on to the next one before I can post. Anyhow a great video and a very tuff danger-est job. best thing you did was buy that fork lift.
message to self next project fix the jerky clutch.
I’m not sure how to get that thing to go smoothly. But at least it goes and lifts 😉
As said before . Nice shop !
Thanks 👍
Keep the great videos coming friend. From Scotland
Thanks!
Nice that you have the space to work now!
When you finished sprucing that massey up it’ll really be a sexy machine.
Thanks! I hope so!
Insanely funny outro, thank you for making me laugh for 15min😂😂😂
Glad I could! 😆😆
JT, you scare me when you work with heavy stuff by yourself! Please be careful and safe!
I will! Thank you!
Put some blocks down in case that Jack kicks out buddy hate to see you get hurt
If you drill or torch some holes a few inches back from the tip of your forks you can put a clevis on them and use it as a crane. The clevis will also stop a ratchet strap from slipping off the end.
They have them. If you watch when I pull the tire outside I pull a screwdriver from one of the holes, it was holding a strap in place
Love the videos man keep on keepin on. Cheers from upstate NY.
Thanks!
Great job!!!
Thank you!!
Another great video and the ending was a hoot!
Right on! Thanks!
JT I got to give it to you the ending was not only funny but creative. I really think Hollywood is under serious threat from You Tube creators like yourself. As Harold from ARW would say KO-KO (Keep on Keeping on.) .
Right on! Thanks!
That fork lift was a god send JT. Love your work.
Thanks!
Good thing you’ve got the forklift! 😅
Right on!
Another great one JT especially the end 😂😂
Right on! Thanks!
Hi JT it would have been a cool project to see you fix up The Mello yello she lifts pallets and tires and all sorts of other things she deserves some tlc🥰😀😀😀
All in good time. Got 4 projects for summer and the forker is one of them 😉
😃😃👍👍❤️😃👍👍👍👍👍👍❤️👍👍👍👍
Great Video JT! Love the Hulkamania shirt😂
Classic 😆😆
Brilliant J T . Your a winner
Thanks!
Too funny. “Massey Ferguson”
😆😆
Great job JT.
Thanks!
A side shift forklift would sure have been handy with the tire removal. Keep your eye out for an upgrade 😊. Thx
Right on!
You have got your hands full. Be safe and keep up the good work.
Thank you, I will
🤣LOL... Rolls Ferguson... man, it's gonna be a hell of a job with her.... the new workshop is just awesome! - Love that episode! 👍
Thanks very much! I appreciate it!
Nice video JT. The forklift has really been helpful.
Sure has!
Hey Joe,,,so,,where do we start?? The 1800 is gonna turn into a grumpy old bastard. Otis is earning his keep. The shop is perfect. The gunslinger is laughing his duals off. Hot chick's and gunslinger. Definitely blue mountain madness. Cheers buddy 👍
Right! 😆😆.
Thanks!
😂 great video especially the end very funny
Glad you enjoyed
Big job hard work , well done 👍👍👍👍
Thanks!
Cannot wait to watch the transformation
Thanks! Hopefully in the next few weeks!
Great ending and I guess after all those years she just did not want to give up her wheel as for the rain we are the same way here in Tn buy that is ok it’s better then 30 miles from me they had tornados keep up the great videos .
Right! Glad you’re ok down there
I think Otis is a good name for the forklift
Wow, you have more patience than me.Good luck
Thanks!
Best ending EVER! Cheers!
Thanks!
I'll tell ya, I'm weirdly excited about this project for whatever reason. Grew up driving masseys (1100 and 175gp) All those wood blocks remind me of putting away the 1100 after mowing jobs because you never know if you picked up a small leak at some point. It kept the frame up in case one ran flat overnight. Thankfully never needed it.
Right on!
Never had anything go easy or as I planned. I can feel your frustration too. Oh well
It happens 😉
Get yourself a cherry picker, it'll work great for those tires plus other lifting
Good going J T , a lot of work removing panels and preping for painting . one stubborn tyre , rim and Centre .
Right on!
Love the outro
Right on! Thanks!
The outro was brilliantJT !! 🤣🤣🤣🤣
Thanks😆
Excellent video JT :) also yes some tire get of rims & putting back task to and have had my share to included! I said to lots place work for doing tires said owners run should be took off and on lots for 5 years for each tires of any vechiles so be easy to do when needed repairs or replacement! Yes be costly but much better and to less problems!
Right on!
Like your videos please be safe
Will do!
Love the ending lol!
Thanks!
Great work so far- most bigger projects seem to get bigger once you dive into them
That’s for sure!
Thanks JT
😃
If that tire really is the original to the tractor it's no wonder that it wouldn't come off easily. That's more than just rust at this point, it's fused on there.
As the project gets frustrating remember how much easier it is with your new spacious shop, your smooth concrete floor, and your forklift for mechanical assistance with heavy parts.
I'm looking forward to seeing the old girl all dolled up.
You are right! That would have been a nightmare in the old barn with no forklift!
Really glad you bought that forklift!lol
Right! That thing is awesome!
I feel your pain, I've managed to do my burn down spray and that's it, ground isn't solid enough even with duals and can't dry with all the rain this spring.
Hope it drys out soon!
JT. Same here in Curtice OH. I have standing water where I've never had
It’s terrible this year!
You are liking that forklift!
Sure am! I use it all the time!
Love the shirt
Thanks!
Boy that forklift coming in handy now ain’t it👍🏼
Sure is! Gets more use than anything!
🇸🇪 keep at it JT, you will get there in the end.
Thanks!
Maybe loosen up the bolts a little and drive the tractor back and forth to loosen things up ahead of disassembly?
I will on the next one
Nice one j.t. you need to save up get a over head crane to make your life easier. Get yourself a hydraulic power pack save you so much hassle and they can do so much for you. Great video as normal. From Andy in uk
Thanks for the tip!
That end of the video 🤣
Thanks for noticing!
Whatever that was at the end of the video, I liked it !
Great! 😆
Thanks for sharing JT. I feel your pain. Hard to do everything on your own and that is what I unfortunately have to do. As soon as you brought the forklift into the picture, I thought, wow, smart buy and glad JT took the time to get that up and running. Smart move. I busted a gut at the end. Enough so my wife came over to see what I was laughing about.
Have a blessed weekend.
Thanks very much!
daym, the noise that forklift makes through that mike you have sounds like its alive some animal. cool sound effects i reckon JT.
Thanks!
If you don’t mind my asking about how much does it cost to have a tire like that removed and replaced? The forklift may not be perfect but wow what a genius purchase that has turned out to be. That last bit at the end was hilarious dude😂😂😂 I was dying. Be safe out there JT.
Thanks! They charge me 100 bucks to change one out. 75 for the 18.4’s
man ive done that same kinda shit with you did with the JD in tough situations even though its not what u want to do in the first place, hopefully the hulkamania shirt gave ya a little boost moving the heavy tires lol , looks like the forklift is already paying for itself so that awesome too! nice work !
It helped 😆😆
That is so funny at the end😂😂
Thanks!
The rabbit doesn’t always win the race. I bet it looks kick ass when ur done!!! Hell that’s like wrestling a damn grizzly bear. U will find ur rhythm.
Right on!
Love the ending 😂😂
What are you shooting at with the rifle 🤔
I thought you was pulling the big guns out.
Door #1 😂😂 you’re killin me
😆 right on!
I wish I still lived in Kalamazoo. I would help ya!!
Right on! Still 31/2 hours away lll
Clean and do the cabs interior on this one ,,its worth it I would say if everything else cks out great ,as you go thru it,,paint up some of your parts in the barn shop leaving your new one open for more service work and teardown,and so to keep the paint off the floors😊
Cab will get a makeover on this rig!
Great video JT, I though the Hulk was on your show for a while 😂
😆. Thanks!
4:40 Was waiting for the Real American Theme Song to kick in.
Ha! Almost did lol
I enjoyed the video. The forklift is paying it's way pretty quick.
You got that right!
Geez J.T. you must be having a bad day. I was just messing with you. I sold tools for 40 odd years and believe it or not, there is a difference. A claw hammer doesn't have as hard a face as a ball peen. It's made for driving nails. A ball been hammer is made for hitting hardened surfaces. Anyway, I like your videos and lately I've noticed others besides yours where folks are using the WRONG hammer. I say it for your safety. A claw hammer might chip more readily than a ball peen and you only get 2 eyes. Anyway, have a great day and please do keep up the great content. I like it.
Right on! I appreciate that, I will need to invest in some ball hammers.
@@jtsbarnngrill6873 Do you have any tool trucks that come by anywhere around you? And I don't mean Matco. Snap-On, Mac or my favorite, Cornwell tools all sell great stuff. If you buy cheap tools, you will just have to buy them again. Anyway, to my point, run down one of those trucks and buy a couple of the popular sizes. 12, 16, 24, 32. ounce. They will outlive you if taken care of. My preference is wood handles. I always wrap the handles with duct tape from the head down to just above where you would grab it. That will save the handle if you miss your target. You won't regret it.
There is a snap on and Mac that run the area. I have got snap on tools from the truck when I catch him at my local auto parts.
@@jtsbarnngrill6873 Well of those 2, I'd opt for the Snap-On. A bit pricier but they are always around. No matter where you go. Cornwell is the oldest tool company but still employee owned so they are growing a bit slower. The quality is right up there with Snap-On though and quite a bit less money. Igf I knew where you were located, I'd try to get a truck to stop by.
Buy a jack Up pallet hand truck for moving pallets about,,,,, they are great for removing your tractor tyres and truck tyres
I really like the new shop. JT can you send a link on the manufacture?
It was A&S steel buildings. I bought it from a shop here locally but they are the manufacturer
Dad bought a Case 4690 a while back, then turned around and bought a 4890 with a bad transmission too. I asked why? Turns out the 4890 had the wide rims already added like you have. Dad said the factory 18.4-34 tires were $1200 each plus $300 tubes and the big ones were basically free at the junkyard off combines. He had a company come out and do his, because he knew it would be a fight to get them off the rims. The cost of the tractor was equivalent to the cost of the four new 18.4-34 tires!
I believe that! The tires I’m putting in this were all combine tires.
Holy shit man, put some blocks under it, instead of one lousy jack. (Ah much better later in the vid)
As for the RR ad on the end. Don't worry JT. Rolls will haul 2 people, so wil the MAssey. A lot of that fancy finish material sounded like plastic, compared to the rusted steel and aluminum on the Big Girl. That Royce won't haul 15000 lbs. EVER! Both will take yer girl to the lake. The Fergy will pull the RR out of the lake. The Fergy will pull the RR into the lake, and laugh. The RR will slowly drive away from the lake quietly, calmly over gravel roads. The Massey will sit quietly, playing Nitty Gritty while you and the little honey, do a little "Fishin' In The Dark." Ifffin you know what I mean............ And a second thought, Take the forklift, lift the tire back up straight, put a stump where the center piece would sit, knock the wheel back over. Weight and a force in motion. MAybe, pop that center right out. Just a thought.
Right on!
Well it, as they said in the movie, " you may have to reevaluate your decision making paradigm"! Farming and old tractors??😅 Why do men find satisfaction and humor in another man's struggles? Been there?? That's for making me smile!
The struggle keeps it real 😆
JT you need a jib crane, one that swings with a chain fall,
Right on!
Hulkmania T-shirt and working hard banging away. Love it. Lmfao 🤣
Right on!
Nice
Thanks
Good Morning J T ,I'm thinking it's a lot safer that you didn't take all the wheels off at the same time. I once saw a guy remove all the wheels from a grain trailer, dollied down in shop, Whoops, the whole ass end fell off the blocks, luckily no one was hurt. Have a Great Day. 😊
Right on! That’s what I was afraid of
Tough going there JT but all the swet blood tears and grunts the end results be awesome i agree sooner have a massey ferguson than a rolls royce evertime 👍🏻👍🏻
Right on 😆😆
I cracked up at the ending. Keep'em coming. I grew up in the era of the iron you own, lots of memories.