Pretty machine. Can i ask you to make a video about wich autoclave machine you use? Also it would be nice to see the whole sterilization process. Thank you.
I use original grip wipe it with cavicide and after I submerge the entiere grip in "STERANIOS" it's a liquid for cold sterilization in France and before all this stuff I bag my machine with barrier film on the grip and put the darklab big boss on all the machine grip included For my cheyenne hawk pen I use disposable grip it's really great
I started with tube-tip (2 pcs) combo then switched to the tube and tip and grip seperate (2pcs) stainless steel on coils. Then went to plastic tub-tip with stailess grip (2 pca) then to the all in one plastic disposable tube-tip-grip (1 pcs) on coils. The stainless of couse ran thorugh the pressure cooker...er...I mean auto clave. At first it was straight out of the box into the autoclave for the plastic then they started comming pre-steralized in single use package. But now that it is all irrelevant. The less autoclaving and the less soldering of needles, the better.
Hi. Thank you for this video. I'm going to buy une. Would you recommend to get one of the bigger grips or would you save the money and just wrap it more?
@@TattooShopTalk I use the Neuma 4 machine, so I remove the grip which is actually the entire outside of the machine, I use madicide, so I spray and completely soak the grip, wait 10 minutes and then dry and wipe down with alcohol. Ready to go 👍🏻👍🏻 Love you and Carlos, you guys are down to earth and don’t submit to all that “Ink Master “Nonsense ‼️ You guys are just passionate about tattooing as am I 👍🏻😎🙏🏻🙏🏻 BTW, Carlos is an amazingly talented Artist, I could only wish to be half as talented 😊 God Bless 😊🙏🏻🙏🏻
Do you...?
- Autoclave original grip
- Spray, disinfect, cold sterilize original grip
- Use disposable grip
- Do nothing
autoklav + cold spray sterilization
Pretty machine. Can i ask you to make a video about wich autoclave machine you use? Also it would be nice to see the whole sterilization process. Thank you.
I just got the inkclaw tattoo battery and I love it! Just got one to test it out and now im gonna get the second after using it!’
I use original grip but bagged and after I clean them and spray them down
I use original grip wipe it with cavicide and after I submerge the entiere grip in "STERANIOS" it's a liquid for cold sterilization in France and before all this stuff I bag my machine with barrier film on the grip and put the darklab big boss on all the machine grip included
For my cheyenne hawk pen I use disposable grip it's really great
Thanks for input
You need to put a tiny amount of lubrication on the o rings . Vaseline works. Or super lube. Very small amount . It fixes the squeak noise
Thanks. Not really a problem with a little squeak but if it annoys anyone then here is a tip - little lube and it's all good
I started with tube-tip (2 pcs) combo then switched to the tube and tip and grip seperate (2pcs) stainless steel on coils. Then went to plastic tub-tip with stailess grip (2 pca) then to the all in one plastic disposable tube-tip-grip (1 pcs) on coils. The stainless of couse ran thorugh the pressure cooker...er...I mean auto clave. At first it was straight out of the box into the autoclave for the plastic then they started comming pre-steralized in single use package. But now that it is all irrelevant. The less autoclaving and the less soldering of needles, the better.
Grips have progressed long way. Disposable ones some 10 years ago were also pretty bad compared to what's available now
Hey! did you had any bad experiences with the machine even after 2 years, does it still work or so? thanks!
I don't use that much but it still works and it is to this day the most quiet tattoo machine that I have
Hi. Thank you for this video. I'm going to buy une. Would you recommend to get one of the bigger grips or would you save the money and just wrap it more?
My favourite are are two middle sizes. Chunky one is a bit specific
I also use Darklab Big Boss clipcord sleeves which fit over mostly anything 😎 like grips, batteries etc. 👍🏻👍🏻
I hate those green ones idk why I always have trouble breaking down it gets sticky
I wrap the grips and afterwards I use cold sterilization 👍🏻👍🏻😎😎
Is it a spray type or submerge the whole grip?
@@TattooShopTalk I use the Neuma 4 machine, so I remove the grip which is actually the entire outside of the machine, I use madicide, so I spray and completely soak the grip, wait 10 minutes and then dry and wipe down with alcohol. Ready to go 👍🏻👍🏻 Love you and Carlos, you guys are down to earth and don’t submit to all that “Ink Master “Nonsense ‼️ You guys are just passionate about tattooing as am I 👍🏻😎🙏🏻🙏🏻 BTW, Carlos is an amazingly talented Artist, I could only wish to be half as talented 😊 God Bless 😊🙏🏻🙏🏻
@@TattooShopTalk This is recommended by the creator of the Neuma 4 Machine. His name is Carson Hill, he is a great guy and incredibly smart 😊🙏🏻🙏🏻👍🏻
4.22 Newton meters pretty strong
Only disposable grips ! Didi Moraes Tattoo 😉
Peace of mind and comfort with disposable grips is amazing