Thanks for doing this. I have a 32s and NSB 32.16. I have a large synth and drum machine setup. I only use sounds that I have programmed myself. Using the onboard sounds of the mixer as part of the sound the way we did it when we used tape. Because of the way the mixer is made when I record my music it is always dry and I tried to get presonus to help me to get the sound I was looking for. They could not understand why I didn’t want a dry signal. This will work thanks so much. Only taken 2 years 👍
Love your video, I wish there were more videos on the presonus mixer, like how to hook up an analog headphones from the mixer to a six channel headphone amp. And how to send the musicians what they need. Peace Bro
I want tom use out board effects and I also want to send audio from the analog in's to the mix outs how do i do that as I have a MPC X that I'd like to send audio to. God bless you Bro. Todd
If you open the 32s Template in studio one daw under "Interfaces" then switch to daw mode it will auto apply the i/o and auto. and adds all channels when you save as template! Ability to skip all this process , this was a dscussion me and a presonus rep discussed , hope this is helpful, shame their so lil videos on this
Wow didn’t know that. For someone like me who is near a beginner in this new digital world, it’s hard to figure out simple stuff like this. That’s why I put this video to explain to people like me who are beginners step by step for dummies🤣 Even if it is the long way around I think it can’t hurt learning how to do it manually as well.
Hi! I love your tutorials. Question: Is it possible to route input line 1 on my mixer to record on input 5, with changing the cable? I have Studiolive 32s III
I assume you are asking whether you can record the physical analog signal plugged into input 1 and send this into channel 5 of the mixer? If so you just need to go into your input routing settings and make sure Analog Input 1 is assigned to Channel 5 as a destination. You can actually assign the same physical input to multiple destinations but the mixer channel can only have one source input at any one time.
Aside from this - Can you please explain if there is a possibility to use the DSP on the outputs in Interface Mode? I need to be able to calibrate my outputs with delay and EQ. Please advise if this is possible. Thanks!
If you open the 32s Template in studio one daw under "Interfaces" then switch to daw mode it will auto apply the i/o and auto. add all channels when you save as template! Ability to skip all this process , this was a dscussion me and a presonus rep discussed , hope this is helpful, shame their so lil videos on this
Ojalá que alguien me entienda en español, tengo la pre Sonus estudio Life 32 S, y protools, y algo le ha pasado en el enrutamiento me suenan mis proyectos en mono y no sé cómo ajustarlo no sé qué menú es de acceder a la presión Uzi
I noticed the Cross on your shirt I pray that we all know that that same cross must be working to put us to death (Self) so that Jesus has full reign over our hearts and lives. if we're truly born again we can proclaim what the apostle paul claimed It's no more I that live but (Christ) that lives in me. Amen. I love you brother and that's for making the video I just picked up the studio live 32 that I'm going to upgrade so I'll have all of the built-in plugins you have with the S model./ We have the same mixer you have all the plugins and I have to buy mine to make it an S version I think the S version is one of the best mixers ever made God bless you and your family. Can I reach out to you if I have a question about the board? Again God bless you, Bro. Todd
in si glad to have sell this.. its the worst consolde i ever own noting is simple...evrething is lost in sub menu and shot.. i change it for a simple tascam model 24, while lacking the motorized fader i simply automate in my daw. its straight forward and simple to aply effect like they were outboard gears just with a aux.... plus i can actually print effect in my daw...and record them out in the tascam as back up easilly and just mix in analogue straight on the sd card... the setup is like all classic console... unlike this...wich is more like a spaceship... i once search 3 hours why the hell i didnt have sound on this console... its pure shit
Thanks for doing this. I have a 32s and NSB 32.16. I have a large synth and drum machine setup. I only use sounds that I have programmed myself. Using the onboard sounds of the mixer as part of the sound the way we did it when we used tape. Because of the way the mixer is made when I record my music it is always dry and I tried to get presonus to help me to get the sound I was looking for. They could not understand why I didn’t want a dry signal. This will work thanks so much. Only taken 2 years 👍
Love your video, I wish there were more videos on the presonus mixer, like how to hook up an analog headphones from the mixer to a six channel headphone amp. And how to send the musicians what they need. Peace Bro
Best FX on DAW, quickest I've seen!. Thank you :).
Thanks man for putting together this great tutorial.
I want tom use out board effects and I also want to send audio from the analog in's to the mix outs how do i do that as I have a MPC X that I'd like to send audio to. God bless you Bro. Todd
Very clearly demonstrated
Thanks That was Great Cya Happy New Year !
Can it be done the other way round ? Send effects from DAW to the studiolive. Got a video on something like that ?
If you open the 32s Template in studio one daw under "Interfaces" then switch to daw mode it will auto apply the i/o and auto. and adds all channels when you save as template! Ability to skip all this process , this was a dscussion me and a presonus rep discussed , hope this is helpful, shame their so lil videos on this
Wow didn’t know that.
For someone like me who is near a beginner in this new digital world,
it’s hard to figure out simple stuff like this.
That’s why I put this video to explain to people like me who are beginners step by step for dummies🤣
Even if it is the long way around I think it can’t hurt learning how to do it manually as well.
Good Video Important Stuff....Joe from Staten Island
Hi! I love your tutorials. Question: Is it possible to route input line 1 on my mixer to record on input 5, with changing the cable? I have Studiolive 32s III
I assume you are asking whether you can record the physical analog signal plugged into input 1 and send this into channel 5 of the mixer? If so you just need to go into your input routing settings and make sure Analog Input 1 is assigned to Channel 5 as a destination. You can actually assign the same physical input to multiple destinations but the mixer channel can only have one source input at any one time.
Aside from this - Can you please explain if there is a possibility to use the DSP on the outputs in Interface Mode? I need to be able to calibrate my outputs with delay and EQ. Please advise if this is possible. Thanks!
Controlling other DAWS such as Cakwalk X3, If it wasn't tested, Can you
find out? What setting needs to be setup. I Preferr Cakewalk not studio
One.
Fab Video Andrew ...I have 32S
If you open the 32s Template in studio one daw under "Interfaces" then switch to daw mode it will auto apply the i/o and auto. add all channels when you save as template! Ability to skip all this process , this was a dscussion me and a presonus rep discussed , hope this is helpful, shame their so lil videos on this
Doet this allow Wet and Dry recording of this set up Andrew?
Thanks mate, yeah will record a track dry and the allocated tracks wet.
thanks mate
Turn the damn lights on!
Ojalá que alguien me entienda en español, tengo la pre Sonus estudio Life 32 S, y protools, y algo le ha pasado en el enrutamiento me suenan mis proyectos en mono y no sé cómo ajustarlo no sé qué menú es de acceder a la presión Uzi
Sería posible en español?
I noticed the Cross on your shirt I pray that we all know that that same cross must be working to put us to death (Self) so that Jesus has full reign over our hearts and lives. if we're truly born again we can proclaim what the apostle paul claimed It's no more I that live but (Christ) that lives in me. Amen. I love you brother and that's for making the video I just picked up the studio live 32 that I'm going to upgrade so I'll have all of the built-in plugins you have with the S model./ We have the same mixer you have all the plugins and I have to buy mine to make it an S version I think the S version is one of the best mixers ever made God bless you and your family. Can I reach out to you if I have a question about the board? Again God bless you, Bro. Todd
in si glad to have sell this.. its the worst consolde i ever own noting is simple...evrething is lost in sub menu and shot.. i change it for a simple tascam model 24, while lacking the motorized fader i simply automate in my daw.
its straight forward and simple to aply effect like they were outboard gears just with a aux.... plus i can actually print effect in my daw...and record them out in the tascam as back up easilly and just mix in analogue straight on the sd card... the setup is like all classic console... unlike this...wich is more like a spaceship... i once search 3 hours why the hell i didnt have sound on this console... its pure shit