Nice video but wrong method. All the frozen part got water on them after the assembling the engine you will have a water inside your engine due to the frost melting down slowly from these parts. Regardless how long it takes you to close the engine but water will stay inside. You can clearly hear the dry/rusting noise coming from the engine after starting the engine, it's just remained water inside the parts.
@@TRIVANDRUMBASEDKERALITE unfortunately after closing the engine there will be no outlet to evaporation also engine will produce combustion so it will burnout but before that process things can be damaged due to higher level of water mixing with the engine oil. Such as damaging the bearings and head cylinder sleeve/pocket? 🤔 Rubber seals making hot and then cold can cracked and loses their elasticity?
No hard feelings brv, just trying to understand the method you use for this project of yours as never came across such before. After all rest of the job really well done no doubt 👍 👏
@@nazarbutt1720 actually i had fitted the crank seals after the bearing and hot aluminium flange become normal temp. that is enough time for the evoporation. hot and cold method is a universal engineering method for interfence fittings. you can google it. thanks
![[UNCUT] “บอสณวัฒน์” ลากไส้!! ใครหนุนหลัง "แม่ตั๊ก ป๋าเบียร์" I คนดังนั่งเคลียร์ I 30 ก.ย. 67](http://i.ytimg.com/vi/QlD7mU2KKRk/mqdefault.jpg)
Voice over cheyyathe oru attraction illaa,
Already ulla video ayond aanu
Number tharumo
Annan paranjapolaa 6k rx100 eduthu panituu. 50k ayeeee.
😁 40 rupakk paninjo
Ippozha oru manasamadhanam ayathu
Voice yavide
ബ്രോ എന്തിനാ കവർ ഹീറ്റ് ആക്കുന്നേ.
Bearing fit cheyyan vendi
@@TRIVANDRUMBASEDKERALITE അപ്പോൾ അവിടത്തെ പെയിൻ്റ് പോകില്ലേ.
@@rajesh.R engine case matram aanu heat akunnath.
Bro ഇത് 4speed എഞ്ചിൻ അല്ലെ
Athe
Voice illathe nth ith🥱
Mera do bike hain app thik kar sakta hain kiya
Bro
Rxinokke power koottumbol crank balance cheyyunnath enganeyaan????
Angane balance cheythillengil engine life kurayumo??
Balance ing software kal und. Extra hole ittum. Aluminum piece ittum avar balance cheyyarund.
voice over illathe kaanan thonnunnilla
Will do.
Rate
Pari bro
Engine overhaul cheytha udan chamber vachu odichal scene indakumo
Illa. But calculated anel powlokkum
Macha...video pwolichu....next video pattacha voice itolo...katta waiting aaa😍💥
How much milage it gives after engine rebuild....???
30-35.
Exhaust rise 3 mm
Gasket വെക്കുമ്പോൾ ഉപയോഗിക്കുന്ന Gum ഏതാണ്
Hii aashane
Haii
Pls reply
voice illalo
Next video
@@TRIVANDRUMBASEDKERALITE Ok
Chetta which is best piston. top pro or goetx piston say any one
Top pro original vanganam.
Npp is also good
Good wrk bro👍
engine full set ayile..🔥
Aay. 😁
Ippo eth cylinder aahn ittirikkunne??
Diamond
@@TRIVANDRUMBASEDKERALITE ennu paranjal endha bro??😁
xelent work sir
bro voice edathatentu 🤔🤔
Already oru assembly video und athond aanu
kelkkan oru sugamilla bro .
Beautiful working without sound
Bro it's possible to get rx100 sound in rx135?
🔥🔥🔥🔥
Hai broii
I have 135 but I love rx100 beatsound
❤️❤️❤️
Hai
Plz make hindi version
Hyy👋
Hai
Voice over cheyii
Pinnalla!!!!!!
😎
👍👍👍
Hai
💖💖💖💖💖
Hai
💥
👍👍
Bro tvmil avida ith?
Not a workshop
Bro in rx clutch side crank oil seal, which side should the oil seal number be facing or Will it work in any direction?
Derailed video und engine assembly.
Hta veliyil kananam
Nice video but wrong method. All the frozen part got water on them after the assembling the engine you will have a water inside your engine due to the frost melting down slowly from these parts. Regardless how long it takes you to close the engine but water will stay inside. You can clearly hear the dry/rusting noise coming from the engine after starting the engine, it's just remained water inside the parts.
it wil evaporate when contact with hot surface i had heated.
thank you..
@@TRIVANDRUMBASEDKERALITE
unfortunately after closing the engine there will be no outlet to evaporation also engine will produce combustion so it will burnout but before that process things can be damaged due to higher level of water mixing with the engine oil. Such as damaging the bearings and head cylinder sleeve/pocket? 🤔
Rubber seals making hot and then cold can cracked and loses their elasticity?
No hard feelings brv, just trying to understand the method you use for this project of yours as never came across such before.
After all rest of the job really well done no doubt 👍 👏
@@nazarbutt1720 actually i had fitted the crank seals after the bearing and hot aluminium flange become normal temp.
that is enough time for the evoporation.
hot and cold method is a universal engineering method for interfence fittings.
you can google it. thanks