Hey man, big fan, I've learned a lot from your videos but i just wanna share my experience with the pins being installed the way you recommend. I had an unsuccessful first flight due to an unnoticed chip in a rotor blade after a minor crash. Once I put it back up, the Phantom 2 went up and over my head at a severe angle and before I could shut it down, it cracked off of a tree limb in my neighbors yard. Upon impact, all the momentum of the gimbal/camera moving forward stressed out the upper plate causing it to snap off in the front. When I found the Phantom, the plate was there with the two front holes/dampers missing, along with the rest of the gimbal and Hero 3+. It appears that if I had put them in the way DJI recommends, the back pin would have helped spread out that stress to the back of the plate as well and probably kept the gimbal attached. Granted it's a low probability of this happening and my crash was rare, but I've been without a gimbal and Hero 3+ since it snapped off and fell somewhere under 2 feet of snow in my neighbors yard lol. I'm impatiently waiting for the snow to melt since I've been unsuccessful in finding it up to this point. Just something I wanted to mention so others know that the plastic mounting plates aren't made of metal anymore. God knows flyaway induce panic and terror but add onto that the damage of a Quadcopter AND the loss of the gimbal/Hero; that's alot of money to be missing. Anyway, hope my experience gives others something to consider and please keep making great vids, they're all very informative and I learned a lot before i even started flying my own.
Mine doesn't have that USB ribbon cable that yours have. Mine connects to the camera through a special built in connector in the gimble that goes connected in the back of the gopro, no cables needed whatsoever...Probably mine was an upgraded version of it. Nice video...Thumbs up!
hi Thank you for the informative review/guide which has helped me greatly The removal of the connection to the charge feed the camera does have positive function. I have lost many micro SD cards costing many hundreds of dollars on equipment with no cover. Micro SD cards can spring out of receptacle at very inconvenient times also very difficult to find
I have nearly the exact same setup as you, DJI Phantom 2, H3-3D gimbal, and GoPro Hero 3+ Black Edition. Do you notice any buzzing sound or any sound at all while the gimbal is on? I've noticed a low operating sound, do you know if this is normal? Also, my gimbal tends to vibrate louder than normal when tilted at extreme positions, have you came across this problem? I also noticed how your GoPro remains level even when the gimbal is off, how did you manage to balance the GoPro so accurately? Any other recommendations regarding how you perfected your gimbal? Thanks in advance!
HEY, at 4:30, why do you tell us to install clear plastic pins in "diagonal" and then later tell us to move both pins up front? We just had to mount the bracket twice because of this. Other than that, great videos bro.
Strategic Aerial Photography The pins are DJI's method, so I wanted to show the 'official' way and then my recommendation. Good point raised though ;o)
iftibashir We use our setup for aerial videography. We found that by NOT limited the movement (as you show), we get the landing gear legs in the shot. Our preferred solution was to put both pins in the BACK. This prevents the camera from capturing the legs on fast turns. So in the end we installed the plate 3 times total (DJI way, both pins in front, then both pins in back). Fortunately DJI sells a package of pins which are not expensive and there are 10 pins and clips in the package.
I have a H3-3D Gimbal suddenly I stop working, I checked it and it does not turn on any of the bulbs that are in the back part, and it gets hotter than the base of the camera go pro, could you help me solve the problem?
Thanks a bunch for the excellent video iftibashir. If the Gopro was not being used for FPV and Gopro charging was being done via computer USB. Could the USB ribbon be taped to the back of the gimbal plate and not used? Seems like a fairly delicate item that will wear out after constant use. Cheers. Thanks again.
You need to have an affiliate account with b&h or something alike.. I watched all 5 videos because I'm in the market for one of these set ups, and I would gladly buy it through your link if it was available. Great videos!
I ordered this gimbal after watching your video. However, the parts I received did not match your video and there was no power adapter that would even power the gimbal up so it was useless. I'm sending it back. Now, my original camera will not work. I'm having difficulty connecting to the Phantom WIFI, too. I've done the reset/power down and up routine but it keeps dying. What was a good, working drone is now basically worthless to me as I use it to film. Do you have ANY ideas on what I can do to save this thing? I would really like a three-axis gimbal for smooth shooting. Thanks, Jim
You should have contacted DJI and asked them for the missing part - it should come with everything in the video - although bear in mind the video is also 4 years or so old now!! Also note that the GoPro needs to be running an older firmware, since GoPro released an update which stopped the FPV feed!
Steen Pedersen It was never GoPro-Approved in the first instance. Nevertheless, it made for a much neater setup - not sure why they dropped that for a flimsy USB connector!
Hi Can you please help? I have installed the gimbal (H3-3D) and the gimbal doesn't pan and whenever I try to record with my GoPro the leg is always in the shot. How do you think I can fix this? Thanks
Hey man, big fan, I've learned a lot from your videos but i just wanna share my experience with the pins being installed the way you recommend. I had an unsuccessful first flight due to an unnoticed chip in a rotor blade after a minor crash. Once I put it back up, the Phantom 2 went up and over my head at a severe angle and before I could shut it down, it cracked off of a tree limb in my neighbors yard. Upon impact, all the momentum of the gimbal/camera moving forward stressed out the upper plate causing it to snap off in the front. When I found the Phantom, the plate was there with the two front holes/dampers missing, along with the rest of the gimbal and Hero 3+. It appears that if I had put them in the way DJI recommends, the back pin would have helped spread out that stress to the back of the plate as well and probably kept the gimbal attached. Granted it's a low probability of this happening and my crash was rare, but I've been without a gimbal and Hero 3+ since it snapped off and fell somewhere under 2 feet of snow in my neighbors yard lol. I'm impatiently waiting for the snow to melt since I've been unsuccessful in finding it up to this point. Just something I wanted to mention so others know that the plastic mounting plates aren't made of metal anymore. God knows flyaway induce panic and terror but add onto that the damage of a Quadcopter AND the loss of the gimbal/Hero; that's alot of money to be missing. Anyway, hope my experience gives others something to consider and please keep making great vids, they're all very informative and I learned a lot before i even started flying my own.
Just picked up this Drone w/ the H4-3D. Awesome Video Playlist, thanks for the assistance.
good explanation but I'm interested in how to mount the gopro 5 Black - the DJI Phantom 2
Mine doesn't have that USB ribbon cable that yours have. Mine connects to the camera through a special built in connector in the gimble that goes connected in the back of the gopro, no cables needed whatsoever...Probably mine was an upgraded version of it.
Nice video...Thumbs up!
hi
Thank you for the informative review/guide which has helped me greatly
The removal of the connection to the charge feed the camera does have positive function.
I have lost many micro SD cards costing many hundreds of dollars on equipment with no cover.
Micro SD cards can spring out of receptacle at very inconvenient times also very difficult to find
If you look at 7:14 the gimbal can't touch the securing pin. The gimbal is programmed so that it can't touch it.
Tygo Wouthuis Correct ;o)
iftibashir Its still a perfect video with the perfect explanation, except for that. +1 sub +1 like
Tygo Wouthuis Thank you. I didn't realise the gimbal didn't pan that far when powered. A silly mistake really!! Will take more care in future. ;o)
Thanks for this tutorial, it saved me from messing up my drone
Can I use the gimball with a different action cam, or It works only with a gopro?
I have nearly the exact same setup as you, DJI Phantom 2, H3-3D gimbal, and GoPro Hero 3+ Black Edition. Do you notice any buzzing sound or any sound at all while the gimbal is on? I've noticed a low operating sound, do you know if this is normal? Also, my gimbal tends to vibrate louder than normal when tilted at extreme positions, have you came across this problem? I also noticed how your GoPro remains level even when the gimbal is off, how did you manage to balance the GoPro so accurately? Any other recommendations regarding how you perfected your gimbal? Thanks in advance!
Hello. i have phantom-2-vision can i mount the H4-3D? and how do you see the image of the go pro 4? thank you very much
Nice video! Mine will be here tomorrow!
hello, fantastic review many thanks! I want to ask if i can mount the sony actioncam on that H3-3D thank you
I'm just getting the vision +
hello friend. Does it work with gopro hero 4 silver?
Will a GoPro hero+ fit onto Zen house H3 3D gimbal onto a Phantom 2
where can i buy the adapter for gopro?
HEY, at 4:30, why do you tell us to install clear plastic pins in "diagonal" and then later tell us to move both pins up front? We just had to mount the bracket twice because of this. Other than that, great videos bro.
Strategic Aerial Photography The pins are DJI's method, so I wanted to show the 'official' way and then my recommendation.
Good point raised though ;o)
iftibashir We use our setup for aerial videography. We found that by NOT limited the movement (as you show), we get the landing gear legs in the shot. Our preferred solution was to put both pins in the BACK. This prevents the camera from capturing the legs on fast turns. So in the end we installed the plate 3 times total (DJI way, both pins in front, then both pins in back). Fortunately DJI sells a package of pins which are not expensive and there are 10 pins and clips in the package.
I have a H3-3D Gimbal suddenly I stop working, I checked it and it does not turn on any of the bulbs that are in the back part, and it gets hotter than the base of the camera go pro, could you help me solve the problem?
Can i use walkera to phantom 3 standard ?
how many meters for the wi-fi video signal before getting lost?
Work with gopro hero 5?
HI, can i install a Phantom 2 vision+ camera (with gimbal) to a Phantom 2 standar?
Can you control the gimball that iT looks down?
Thanks a bunch for the excellent video iftibashir.
If the Gopro was not being used for FPV and Gopro charging was being done via computer USB. Could the USB ribbon be taped to the back of the gimbal plate and not used? Seems like a fairly delicate item that will wear out after constant use.
Cheers. Thanks again.
Baz Davies If not being used for FPV or charging then there is no need to use the ribbon cable ;o)
will the DJI pilot app (phone FPV) still work ???
Are you meant to install the GCU included in the box? You didn't mention installing it and i am very confused. I have a phantom 2. Thanks :).
Check earlier videos in the series ;o)
Most informative video I've see Thank You
You need to have an affiliate account with b&h or something alike.. I watched all 5 videos because I'm in the market for one of these set ups, and I would gladly buy it through your link if it was available. Great videos!
gnicklin Thanks! Next video in the series is coming soon!
My first H3_3D gimbal fitted straight into the gopro without the little gimbal ribbon. Why would they change to this terrible system?
I ordered this gimbal after watching your video. However, the parts I received did not match your video and there was no power adapter that would even power the gimbal up so it was useless. I'm sending it back. Now, my original camera will not work. I'm having difficulty connecting to the Phantom WIFI, too. I've done the reset/power down and up routine but it keeps dying. What was a good, working drone is now basically worthless to me as I use it to film. Do you have ANY ideas on what I can do to save this thing? I would really like a three-axis gimbal for smooth shooting. Thanks, Jim
You should have contacted DJI and asked them for the missing part - it should come with everything in the video - although bear in mind the video is also 4 years or so old now!!
Also note that the GoPro needs to be running an older firmware, since GoPro released an update which stopped the FPV feed!
Onde eu compro esse ginbal?
How can mount go pro 2 please answer me.
Thank you great video, waiting for FPV :)
Excellent video...
SmoovMedia Thank you
gr8 vid! just what I was looking 4
tnx
Great vid i only have phantom 1 ut its so good
But*
Does it work with a HERO 4 Silver? It should be the same size.
LPMoritz Yes, works exactly the same.
why did they remove the connector from the H3-2D going into the back of the GoPro?
Steen Pedersen It was never GoPro-Approved in the first instance. Nevertheless, it made for a much neater setup - not sure why they dropped that for a flimsy USB connector!
hey, i was just wondering why you only used 2 of the anti drop pins on the dii phantom?
Jack Sharkey Thats all you need - using all 4 is overkill and not required.
Hi
Can you please help?
I have installed the gimbal (H3-3D) and the gimbal doesn't pan and whenever I try to record with my GoPro the leg is always in the shot. How do you think I can fix this?
Thanks
And I have the Phantom 2
What do you use to control the movement on the gimbal?
+Sam south all - The gimbal follows the quad and remains facing forward. You cannot control the movement of the gimbal.
+iftibashir how do you get the camera to tilt down then?
+iftibashir how do you get the camera to tilt down then?
+iftibashir how do you get the camera to tilt down then?
Sorry I thought you meant side to side movement also. Tilt is controlled by a small lever on the rear of the controller.
who knows, what is the name or where I find a USB adapter like the one in the movie?
Thanks
Which adapter - where abouts in the video?
And can you run this on a phantom one
The app doesn't work with my DJI phantom 2...
Do you have to have a anti interference board
stupidchannel1000 No - although apparently it helps with the image quality on the FPV screen?!
will it work with the hero 3 white edition?
ThatCheapDrummer Should be fine as its the same size and weight
iftibashir I have a hero4 blk edition will I need additional software to support it?
Does it work with DJI phantom 2 v+ ?
Love Photography yes
It does, I did install it but I can not make it to appear in my camera view in my phoneapp
Do you have to install the anti interference board?
+Garrett Combs - You don't have to, but if you have it you may as well!
Whene the Gopro hero4 ? :-)
Working on the Hero4 review at the moment. The review will cover all 3 new gopro cameras, so stay tuned!!
thank you keep it up
I got some Gopro 4 black videos, check them out :)
mine doesn't have the pins
That is a problem, search EBay and see if you can find anything.
Will a GoPro hero+ fit onto Zen house H3 3D gimbal onto a Phantom 2
Hi, do DJI Phantom 2 and H3-3D Gimbal work with Xiaomi Yi cam?
Will a GoPro hero+ fit onto Zen house H3 3D gimbal onto a Phantom 2