Very excellent video.i.have a question when we disconnect this from 12volts power supply all settings will be reset or it i will safe the previous setting?
One more question. I just bought one of these. How do you get the temp alarm number to appear in the P6 menu. I only have in and off. But I see you pushing the buttons while I’m P6, and the 39° setting comes up. Mine won’t do that. Thank you
@@Umairworkshop Man I just can’t get it. It’s tricky. I go to P6, then I click both buttons so it blinks, then I set to “on”. But after that, nothing seems to work to get that number. I’ve clicked set again, both buttons again, I’ve pressed and held them as well as held the set button. Are some programmed different? Maybe mine doesn’t have that? I know if I set P2 at a lower temp, it will alarm when it goes over the P2 value. Can you make a video for this? That would be awesome. Thank you again for the reply.
@@Umairworkshop Can you tell me if this controller can be used with a variable voltage thermocouple to speed up and slow down a fan and the voltage to a cooling unit? Or is there a similar controller that can do that? You have been a great help by the way. Thank you!
Great info. Can this be set to activate both at a high temp, then switch circuits to activate again at a low temp? I want to run a peltier, but I want the polarity switched to heat and cool. Thank you.
Two questions; If power is lost, like turn key off in automobile, will it loose its setting? Also, bottom switch/button has C/F, is this able to switch from Celsius to Ferinheight? Thanks for video as these two changes may help many! Liked & subscribed.
if you set it is setting it will not lose it is memory unless you press the two button at same time for 6 seconds , yes it can change to Celsius to ferinheit
Thank you for such a useful tutorial of 1209wk. I have a question. Does w2809 and 1209wk are same? If yes then does both wiring are same like simple 1209k controller. Because i bought same but model is written as w2809. Can you please share video link of wiring. Thanks
Bro every product you have the quality is just exellent where can i buy this type of great quality product... Where you buy these products nd where do you live ?
Hi Umair, i learn a lof from ur videos. I have used w1209. But this version is new to me. I want to use this one in my new incubator project. Can u plz tell me which one is better? W1209 or this one? Thanks!
Good video but I wish you would have addressed the wiring in the back more thoroughly.
Thank you
you are wonderful and many many many thank you . you are THE ONE . REALLY THANK YOU
Ayman
You are welcome ,good to see it helps
Very excellent video.i.have a question when we disconnect this from 12volts power supply all settings will be reset or it i will safe the previous setting?
Thank you, it will keep the setting which it set in even after plugging out
Do you or does anyone else know if the "high-temperature alarm" can be switched to be used as a LOW-temperature alarm instead?
It works on one way only either high temperature alarm or low temperature alarm if set on cooling
@@Umairworkshop oh, that's good to know, thanks
@@jasonpotts6490 you are welcome
One more question.
I just bought one of these.
How do you get the temp alarm
number to appear in the P6 menu.
I only have in and off. But I see you pushing the buttons while I’m P6, and the 39° setting comes up.
Mine won’t do that.
Thank you
When you click on p6 it will show on and off , click + to on then press set button then it will show the number on which it should be alarm
@@Umairworkshop
Man
I just can’t get it. It’s tricky.
I go to P6, then I click both buttons so it blinks, then I set to “on”.
But after that, nothing seems to work to get that number.
I’ve clicked set again, both buttons again, I’ve pressed and held them as well as held the set button.
Are some programmed different? Maybe mine doesn’t have that?
I know if I set P2 at a lower temp, it will alarm when it goes over the P2 value.
Can you make a video for this?
That would be awesome.
Thank you again for the reply.
@@dstdrummer if it is not working as video it might be different version
@@Umairworkshop
Can you tell me if this controller can be used with a variable voltage thermocouple to speed up and slow down a fan and the voltage to a cooling unit? Or is there a similar controller that can do that?
You have been a great help by the way.
Thank you!
Great info.
Can this be set to activate both at a high temp, then switch circuits to activate again at a low temp?
I want to run a peltier, but I want the polarity switched to heat and cool.
Thank you.
No it works only on one mode at one time
Two questions; If power is lost, like turn key off in automobile, will it loose its setting?
Also, bottom switch/button has C/F, is this able to switch from Celsius to Ferinheight? Thanks for video as these two changes may help many! Liked & subscribed.
if you set it is setting it will not lose it is memory unless you press the two button at same time for 6 seconds , yes it can change to Celsius to ferinheit
Thank you for such a useful tutorial of 1209wk.
I have a question. Does w2809 and 1209wk are same?
If yes then does both wiring are same like simple 1209k controller. Because i bought same but model is written as w2809.
Can you please share video link of wiring.
Thanks
it is same product you need to follow same instructions
Sir kya supply cut karde or thodi der bad on kare to kya hame maximum and minimum Temperature firse set karna padega ?plz reply
aik dafa set karny ky baad set rehta Hai
W1209 tamperature controller me bhi aisee hee hoga?
@@gujjug5219 yes w1209 mein bhi aik time set kartay hain set rehta hai
Thanks
hello bhai incubator k leye konsa acha rahay ga 12volt incubator hai
w1209
w2809
ya ye wala
w2809 is high quality than w1209
Bro every product you have the quality is just exellent where can i buy this type of great quality product... Where you buy these products nd where do you live ?
I got it import from China that's why it is high quality , I am in Karachi
Sir please provide me contact or web or procedure how can i get these products or can you make full video on it
Hi Umair, i learn a lof from ur videos. I have used w1209. But this version is new to me. I want to use this one in my new incubator project. Can u plz tell me which one is better? W1209 or this one? Thanks!
Thats great ,W1218 is better to use
@@Umairworkshop alright, thanks. I will use it.
ONE MORE QUESTION : haw Many degree - ( -) The maximum temperature can be measured + or - ?
I think its lower is -50 and 50 Celsius limit to sensor
Brother, may we know the type of DC input you are using?
It is 12v from power supply
If cut off power the setting will reset or not
first set the p0 setting then set the temperature then close now if it reset its malfunction
i have one of these but when i connect it to power all i get is clicking sound and a blink "0". Is there anyway i could fix this?
did you connect the sensor wire correctly
Umair's Workshop I connected them the same way you did. But I don’t know.
@@demarkingmaybe you need to change the circuit
Umair's Workshop okay, what do you think I should change it to?
@@demarking I think circuit have fault try other circuit
Bro ye wk wala version kha sa mila ga aur kya price hai
Yeah apko olx ya Daraz py search karna parega
hello, do you know what the max input voltage is on device? I have the voltage in my vehicle set around 15.5v but no more than 15.7v on cold days.
Max input is 12v as written on manual
@@Umairworkshop thank you!
I set mine to hear the audible alarm, but you don't hear anything when the fans kick on due to high temp
Awesome video by the way!
Thank you for good information
Brother, let me know if the alarm goes off when the temperature rises or the load is too high?
Yes the alarm will be on when temperature is over
I want one can you sand me
You can search on Google it's model