💎 How To Scan StarTimes / SES 5 5°E FTA Channels | Newmax Decoder | Pbteck

How To Scan StarTimes FTA Channels On Newmax Decoder
To scan for StarTimes Free-to-Air (FTA) channels on a Newmax decoder, follow these steps:
1. *Connect Your Decoder:*
- Ensure your Newmax decoder is properly connected to your TV and antenna.
- Make sure the antenna is positioned correctly to receive signals.
2. *Power On:*
- Turn on both your TV and the Newmax decoder.
3. *Access the Menu:*
- Using the remote control, press the “Menu” button to access the main menu.
4. *Navigate to Installation:*
- In the main menu, look for the “Installation” or “Setup” option and select it. This may be labeled differently depending on the decoder model.
5. *Select Auto Scan:*
- Within the Installation menu, find and select the “Auto Scan” or “Auto Tuning” option. This will prompt the decoder to start scanning for available channels.
6. *Choose FTA Only:*
- If prompted, choose to scan for Free-to-Air (FTA) channels only. This ensures the decoder skips encrypted channels.
7. *Start Scanning:*
- Confirm and start the scanning process. The decoder will search for and store all available FTA channels.
8. *Save Channels:*
- Once the scan is complete, the decoder will display the number of channels found. Save the channels if prompted.
9. *Exit Menu:*
- Exit the menu and start watching the newly found channels.
To scan SES 5 satellite channels, you'll need to follow specific steps that involve configuring your satellite receiver. Here's a general guide to help you through the process:
Equipment Needed:
1. **Satellite Dish**: Properly aligned to the SES 5 satellite position.
2. **Satellite Receiver**: Compatible with SES 5 satellite signals.
3. **TV**: Connected to the satellite receiver.
4. **Coaxial Cables**: For connecting the dish to the receiver and the receiver to the TV.
Steps:
1. **Align Your Dish**:
- Ensure your satellite dish is correctly aligned to the SES 5 satellite. The SES 5 satellite is located at 5° East.
- Use a satellite finder tool to ensure the dish is pointing accurately at the SES 5 satellite.
2. **Connect Your Equipment**:
- Connect the LNB on the satellite dish to your satellite receiver using a coaxial cable.
- Connect your satellite receiver to your TV using HDMI or RCA cables, depending on the available ports.
3. **Configure Your Satellite Receiver**:
- Turn on your TV and satellite receiver.
- Access the receiver’s setup menu (this varies by receiver; consult your receiver's manual if needed).
4. **Input Satellite Settings**:
- In the receiver's menu, find the satellite configuration section.
- Select SES 5 from the list of available satellites. If it's not listed, you might need to manually enter the satellite parameters:
- **Orbital Position**: 5° East
- **Frequency Range**: Typically around 10.7 to 12.75 GHz for Ku-band (verify the exact transponder frequencies if available)
- **Symbol Rate**: Commonly 27500 Ksps (varies by channel)
- **Polarization**: Vertical or Horizontal (depends on the channel)
5. **Perform a Blind Scan**:
- In the satellite settings menu, choose the option to perform a “Blind Scan” or “Auto Scan”.
- This will scan all frequencies and transponders on the SES 5 satellite and store the available channels on your receiver.
6. **Save the Channels**:
- After the scan is complete, save the found channels.
- Exit the menu and return to the main screen.
7. **Fine-tune and Organize**:
- You may want to organize the channels into a preferred order or create favorites lists.
- Check the quality of the signal for each channel and fine-tune the dish alignment if necessary to improve reception.
Troubleshooting Tips:
- **Weak Signal**: If you have a weak signal or no signal, double-check the dish alignment, LNB skew, and all cable connections.
- **Firmware Update**: Ensure your satellite receiver has the latest firmware updates, as these can affect channel scanning and reception.
- **LNB Compatibility**: Make sure the LNB on your dish is compatible with the frequency band (C-band or Ku-band) used by SES 5.
__________________________________
LINKS
WEBSITE:
www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
t.me/pbtecknology
#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire

[@pbteckinfo]

I hope this video has helped you to solve your problem. Comment below your thoughts or whatever you misunderstood. Help this channel to grow by hitting LIKE, SUBSCRIBE and SHARE button. Thanks For Watching...

[@pbteckinfo]

[@Future-Tech1]

Does it work master decorder

[@pbteckinfo]

Sure, i will be uploading a video using master decoder