Royal Enfield Hunter 350 - HandleBar Risers Installation!
ฝัง
- เผยแพร่เมื่อ 3 ก.ค. 2023
- A quick how to clip on fitting the Enfield handlebar risers to the new Royal Enfield Hunter 350. Next up will be a test ride to see if the ride experience has improved.
- ยานยนต์และพาหนะ
Quickly becoming...ok...I lie...already one of my favourite YT channels. Love your stuff Warro.
first of the mods so i will have to get into all the other accessories soon
Looking forward to the ride. The slight lean and reach angle to the bars was about the only thing holding me back on buying the Hunter. I hope it now feels just a bit closer to my Classic 350 - even tho the foot controls are a might back, too. But I think I can live with that.
Some risers also have a rearward offset. That might me what I would try if the cabling will allow it.
Thanks for taking the plunge, Warro! Your videos have helped a lot of us with our bikes and choices!
all good i have a 50 klm hard dirt road ride testing the risers....its up next
@@ridewithwarro Sounds good! Bedtime here. See ya in the mornin’. G’day mate!
I did see these on your previous video of the Hunter in the dirt👌 Those are probably exactly what you were hoping for to give your shoulders a bit more comfort. Took you no time at all to install them 👍 Will you be doing a ride & try review? Good job Warro🙌 Hoping to hear they have done the trick for you🙏
next clip out my thoughts on a bit of harder dirt riding using the risers
Another good clip! Thx!
Glad you enjoyed it
Warro thanks for posting. I have same bike and short arms. Having watched you I am going to give it a go, just a bit worried about brake and clutch lines. Will let you know how it goes. Cheers.
No worries. ride clip thought out next clip
Good stuff Warro
thanks
Easy to follow and make the bike a bit more comfortable
the full ride review out shortly
The more I see of that little Hunter the more I like it. Could not believe the agility of that Hunter in the last clip. Moderate nobbies and great all round bike. Thanks Warro.
had myself in a very risky position hill climb wise about 2 days back. won't go back there again thats for sure....lol got a clip on it too so consering the circumstances i got out of it ok.
rain here now for a few days so rides are out of the question or for me anyway
That's a great way of getting an extra inch rise easily. I could do with a slight rise on the Classic but unfortunately that is not possible because of the bar mounts.
yeah no way they'd fit there as i too gave the classic an eyeball as bikes parked right next to each other.
front on its easy to pick how much more compact the hunter 350 really is
Looks good, Warro. Nice to see that you tightened them up diagonally, as it should be done. Torque setting? Tight enough, but not over-tight. 👍 😁
so far so good ride wise. review clip to come
G'day Warro, not a fan of raising the night of the handle bars myself have done it in the past and no real benefit, it will be interesting to see what you think, cheers mate, Neil 🤠.
next clip out a better idea there
I fitted 30mm risers on the Interceptor, the fitting was easy enough but everything was tight, the cables and wiring.
It took me longer to sort that out than it did fitting the risers.
I'm interested in what you think of the riding position now.
Ride safe
must admit i too had fitting issues on the interceptor. this crap you hear about teasing out the cables etc....lol yeah sure.
this was how i fitted the bar risers on the hunter...that easy and quick.
remove handlebar cable rubbers first...i never did that. undo 4 bolts and take bar caps off. sit new risers inand bolt back up. all done and fit rubbers back on
i did have to go back in and lift bars slightly as throttle was too close.
ive done 50 klm on them now through some very rough dirt track country so will give review shortly
It seems to be a common gripe about the Huntr's cramped stock bar stance, so that's an economical aftermarket success story !
next clip out on the ride has more detail there
Hi Warro, would these risers also fit the Reborn Classic 350? and if so, would I need to alter any cables?
Thanks for your videos, they are always enjoyable and informative.
sorry no fit there. handlebars mounts on classic 350 reborn totally different to the hunter 350.
pity too as i'd fitted a set myself but so far no luck anywhere with risers for classic 350 or for that matter the 500.
@@ridewithwarro thanks for clarifying that for me 👍
@@Blakey51 all good i actually checked that when i first got the hunter. pity too as i like the idea and would be good on the classic 350
as you know Warro I certainly appreciate and sympathize with the hard work you put into the channel, don't let the bastards get you down . Nice to see the bars were tight, Derek from solomotouk bought a scram last year and the dealer didn't tighten the bars and they came loose on the motorway!
must admit that would be one hell of a situation to be in. i bet he was packing it....lol
i recall one day on a brand new classic 500 the steering was too tight from factory and lock dead ahead at 80 kph and i went straight off the road and into the ditch..out the other side and stopped near a large white box tree.
if that tree had been 20 metres closer...my bet is i would have damaged the bike....lol or worse.
Damn Warro I had no idea it was that simple to fit bar risers 😅
on this bike yes but not so when i had that triumph scrambler 900
Hi Warro, I enjoyed the video but I must say the half moon gap left under the riser looks crappy. Regards Edward
Fair enough! i might even black it out and it probably won't stand out as much. will see how that goes
Hi Worro.
Looked an easy fit.
I agree a spot of black paint would make them less obvious.
Look forward to the test.
I wondered how long it would take for you to fix this issue since you seem to like the bike.
review coming up shortly on this and its more positive too
Is there no filler piece for the bottom part of the original clamp?
what you see is what i got. so i guess thats it there
interested to see how it feels now
got a pretty good review coming up on it shortly
Can we install interceptor 650 handlebar on hunter 350 retro?
not sure there but a pretty good idea i think
Just curious, will those lifters fit onto the Classic?
i'd say no as it would be virtually on the edge of the classic cascade casing.
@@ridewithwarro Thanks
Petrol Tank is being hot for engine heat
could be too. all the best!
Sometines it's a bit of work to get them in and on other bikes it's only takes 5 minutes..
yeah and this is thankfully one of those quick drama free mods
@@ridewithwarro Which brand are those ? China or India, I got mine from Aliexpress.
Up & overs are good if got shorter arms.Looks good Warro.
i think worth a try regardless and not much $$$ involved either
I guess participation on camping videos is not very good, I rather enjoy them. it's sad that you invested so much and got back so little.
i like being honest so heres how i see it. i attract lots of jealous people. have so for 50 years. it really pisses them off i just go out and buy what i want...well within reason anyway.
so on this channel they come and see what i've bought or ride but then leave. they come back again and look and rinse and repeat.
i knew it was a big ask to have them click on the like button as i needed a good result to make the clip get any interest in the youtube algorythm.
so i put 25 hours into that clip -reduce footage to 20 minutes and average 6 minute view time.
thought not good at all.
so i went back out and did a quickie fitting handlebar risers to a hunter 350
did the whole lot and up on youtube in under an hour. 4 minute clip. view time 3 minutes.
plus no $$$ outlay and no 25 hour job doing the clip.
camping clip has 3000 views now and its a pity they didn't co-opperate and i think they missed out on a real good series.
unlike most i'm not afraid to spend a few $$$ to try and get things going -never ask for handouts like those other youtube sponges but thats how the dice rolls.
i'd say the ones who wouldn't click on the like button are happy now but i think the only way i will feel better about this camp venture is ...maybe do a pre-order on one of those new triumph 400 street bikes. that should make me feel a bit better...lol
My comment disappeared. Don't know what is happening.
what comment-try again
@@ridewithwarro On my classic 350 with that unique clamp it was not possible but I found myself taller handlebar replacement that was even cheaper then risers. Long time ago in the pre internet store era, I manufactured risers on milling machine with 50mm rise. It was for Transalp.
The good thing about RE is that they have big slack on the cables.