Just bought my ADV160 last week and mukhang may puntahan nko for DIY Maintenance, Aftermarket parts and Accessories How to. I only subscribe sa detailed and clear mag explain at wala nang paligoy ligoy pa, straight na sa topic. Kudos sir!
@@MOTOBEASTPH thank you.... here Honda recommend to use the same 10w30 oil that you use in the engine, no special gearbox oil.... isn't it crazy how the recommendation changes from country to country
How does the bike calculate its speed? If the speed sensor or ECU calculates from any point upstream of the final drive gear you installed, then is it displaying the correct speed on the speedometer? You were likely going faster than the indicated speed on the speedometer. If the speed sensor is in the final drive gearbox then the displayed speed would likely be correct. If the ECU was remapped, did this allow for correcting the speed displayed? Very interested in this as I am considering doing this upgrade as well. Thanks for uploading this video. Very interesting!
Palagi ko angkas si obr kap. Bali naka 1200 center and 1000 sa clutch ako then 12/13 flyball sa adv 160 ko. Mas okay ba pag nag 14T ako? Hric pulley set JVT Lining and Bell. Sana masagot sir salamat!❤
14T gear is for light weight riders only, and one's who don't carry a pillion. What happens is it can reach a higher top speed, but at the cost of torque.
Nice upgrade! Mas ramdam siguro POV ng bilis ng takbo mo idol kung naka 24 or 30fps lang frametime ng camera na gamit mo, pansin ko lang naka 60fps kaya parang saktuhan lang takbo mo. RS po!
@@MOTOBEASTPH Yes Idol definitely may motion blur na pag 24fps or 30fps, ganyan frametime lang kasi ang true to life na nakikita ng mata ng tao. That's why mas smooth at halos no motion blur na pag 60fps and up na. Thank you napansin mo din idol comments ng viewers mo, keep it up lang lodi!
Good day kap gusto ko mag try ng 14t torque gear currently naka straight 17g ako na flyball, & 1000rpm for center at clutch spring ok lang ba kung ikasa ko ang 14t torque gear, o kailangan ko mag magaan pa na bola? Any recommendations will appreciate thank you
kap motobeast.. kakapa set ko Lang ng straight ST mismo kay mazo.. Mofify TD, DF, Pulley.. planning ko sana gayahin ung mismong set mo.. what do you recommend.. 90kgs ako na rider.. same ba ng degree si mazo sa df pulley kay ecu tech? need ko ba mag 14t din? pati springs ko? sorry sa madameng tanung.. ikaw Lang kasi maayos mag explain ee.. hahaha.. avid follower kap!
@@MOTOBEASTPH yep balak ko na mag adjust . kasi 1500 pala ung ksama nung assy.. tapos 1000 ung center.. 16g ung bola ko.. papatuLong ako sana kung saan baseline ulet ako pwede mag adjust pra sa 90kgs na rider.. stock clutch ba.. mag 1200 paba ko ng center? tanggalin ko po ba washer.. saLamat kap! sorry masyado matanung hahaha
@@DaCedPH Iba kasi degree nyan 13.5 kaya baka di pasok sa set ng ECU Tech na 13.8. Pwede mo try mag 1k clutch tapos timpla ka sa bola. Kung kulang sa hatak, try mo Showar GY6 1200.
Sir kung mababasa mo to, ano po mas magandang gear para sa click160, stock or high-speed? O magpanggilid(cvt set) muna ako bago mag upgrade ng gearings? Thanksss sana mapansinn
@@MOTOBEASTPH nagchange na ako ng springs and flyball sir, bka magawan mo ng video ang proper positioning pag combination ang flyball, parang 16g at 19g. Salamat po. Dito ako nanonood pag nag ddiy ako😊
Ung skin po idol , airblade 160 nka pulley set kalkal ako 1k center , 1200 clutch nkremap pro hirap dumulo halos ntry ko na mgtono ng ibat ibang bola pinaka mtaas ko lmg 124kph straight 16g
Sir pag 15T kalkal Pully set 13.8, 13G Straight flyball, NGK laser iridium SP. stock na lahat sir. Ok kayang combi kahit walang remap? Or anu saggestion sir?
Just bought my ADV160 last week and mukhang may puntahan nko for DIY Maintenance, Aftermarket parts and Accessories How to. I only subscribe sa detailed and clear mag explain at wala nang paligoy ligoy pa, straight na sa topic. Kudos sir!
Napaka ingat gumawa ni bossing.kung may shop ka nagpagawa na ako sayo
pag ikaw bumabaklas easy na easy madaling ma gets ang directions ... salamat boss ... si beat naman next naka beat po kasi ako eh
Meron ako vlog kay Beat ng gearing, bro.
Very informative bossing. Nakakainspire mag DIY. Tools nalang kulang. Hehe
Nice!!! roller 15grams?`14T. top speed 126?.. how many KG rider? Im 80kg should i go 15gram roller? i have Click 160. less weight bike then ADV.
You can try it and see if it works for you. I'm 62kg.
adjust siguro sa bola mga 12 para mas ma rpm kulang sa rpm, di pa naman umaabot sa limit niya
Happy riding together, ride safe! Solid vlog! Solid fan from Maryland, USA.
you deserve more views bro.. salamat sa mga info.. subbed!! RS! 🔥🔥🔥
Sir do you have a link to buy that ecutech? Thank you so much. More power🤙
May link sa description, bro.
Paps baka pwede mo ako bigyan ng video kung paano magkalas at paraan para iwas gasgas ng mga cover at fairings ng ADV 160 nten.. salamat paps,,
Which Viscosity does the Honda gearbox oil that you used have ? 75W or 80W or 80W90 ?
There are no viscosity info on the bottle, but it's what Honda recommends on the user manual.
@@MOTOBEASTPH thank you.... here Honda recommend to use the same 10w30 oil that you use in the engine, no special gearbox oil.... isn't it crazy how the recommendation changes from country to country
I think the weather is something to consider. @@ramiretz
@@genesisyt4843absolutely yes 👍🏻
Naintindihan ko nice pgka explain
Kamusta po difference ng 13T sa 14T overall? Salamat lalo sa arangkada. Thank you
Binanggit ko sa vlog, bro.
Idol try mo nanan 15t tapos ipag compare mo sa stock at 14t
How does the bike calculate its speed? If the speed sensor or ECU calculates from any point upstream of the final drive gear you installed, then is it displaying the correct speed on the speedometer? You were likely going faster than the indicated speed on the speedometer. If the speed sensor is in the final drive gearbox then the displayed speed would likely be correct. If the ECU was remapped, did this allow for correcting the speed displayed? Very interested in this as I am considering doing this upgrade as well. Thanks for uploading this video. Very interesting!
Speed sensor reads the rotation of the bigger gear next to the small one, so changing the small one does not affect it.
@@MOTOBEASTPH Thanks for the clarification!
Sana ganito maghigpit ng nut lahat ng mekaniko 😢
How much faster did you get bro? Was it worth it? ❤
Max I got was 132kph, but it takes too long to reach it. For open roads, it's worth it. For city driving, I'd stay stock.
sir pwede pala mag ride ride diyan sa Expressway na yan ng 160cc lang? db diyan lang yon sa tibig
Nice lods very informative talaga mga vlogs mo madami talaga ma tutunan dito
Should we install 14t or 15t in pcx 125?
Plus 1 teeth from stock.
Same kaya sila ni pcx 160 ng gear box cover
Same. Kaso stop production na si ECU Tech sa 14T gear.
Idol hindi ba magastos o malakas sa consumo nga gas ung upgrade mo.
From 42kpl to 41kpl.
May tutorial kaba boss paano gamitin torque wrench
Ito, bro.
th-cam.com/video/ClH3FLlCvEA/w-d-xo.htmlsi=5MZ1T0vG8A4yRGAx
Kap tanong ko lang anong RPM ng center and clutch spring mo? Thank you kap
1200 center, stock clutch springs.
kap motobeast.. ilan ba RPM ng stock springs nten??
Boss paano malalaman sucat ng higpit sa bawat size ng bolt or nut?
May link sa description ng torque specs, bro.
Boss hnd ba lalakas sa gas cunsumption pag ganyan set and pwede ba pang long rides salamat idol
From 42kpl to 41.2kpl.
Palagi ko angkas si obr kap. Bali naka 1200 center and 1000 sa clutch ako then 12/13 flyball sa adv 160 ko. Mas okay ba pag nag 14T ako? Hric pulley set JVT Lining and Bell. Sana masagot sir salamat!❤
Okay na stock gear, bro para malakas hatak.
Idol san ka umorder ng extension pang impact? Pati sockets?
May link sa description, bro.
Goods pala sa All stock dagdag pa unti² lang muna 14t . Meron po ba geniune parts nyan 14t?. Salamat.
Wala, bro. Stop production na din si ECU Tech
Paps question. Ano yun may angkas kapa nun nung napa 128 mo with 9k rpm?
Solo.
idol yung sa torque spec b ng adv kapareho lang ng sa pcx160?
Same lang sa CVT
Safe ride lagi sa inyo idol.🙏🏻
Boss ask ko lang, gusto ko mag palit ng 14t tapos jvt na pagilid ayus lang ba yung ganun na set?
Try mo lang, bro.
@@MOTOBEASTPH boss pabulong saan mo na score 14T mo
ka adv white present 😊, ala pko nabago sa gilid..
nice vlog kap! rs lagi 🤙🏽
In your experience... can you share your opinion in English. Would love to hear your experience..
14T gear is for light weight riders only, and one's who don't carry a pillion. What happens is it can reach a higher top speed, but at the cost of torque.
Maapektuhan po ba gear ratio/final drive if naka rimset ka na 17s?
Basta nabago circumference ng gulong, iba na reading sa speedometer.
Nice upgrade! Mas ramdam siguro POV ng bilis ng takbo mo idol kung naka 24 or 30fps lang frametime ng camera na gamit mo, pansin ko lang naka 60fps kaya parang saktuhan lang takbo mo. RS po!
Mismo, bro. Wala din yan motion blur.
@@MOTOBEASTPH Yes Idol definitely may motion blur na pag 24fps or 30fps, ganyan frametime lang kasi ang true to life na nakikita ng mata ng tao. That's why mas smooth at halos no motion blur na pag 60fps and up na. Thank you napansin mo din idol comments ng viewers mo, keep it up lang lodi!
Bu parçalar DAYANG VORREİ ADV 150 uygunmu yani 14T arka dişli takılabilirmi?
I'm not really sure if it will fit.
@@MOTOBEASTPH thank you
How many nm did you tighten the gearbox?
23nm
Sir tanong lang.
ADV 150 yung saakin. Ano ppwede na Transmission Gear na available ngayun sa Lazada or Shoppee?
Sana makahingi lang po ng tulong
17T
@@MOTOBEASTPH Sir pwede kaya 15T?
Good day kap gusto ko mag try ng 14t torque gear currently naka straight 17g ako na flyball, & 1000rpm for center at clutch spring ok lang ba kung ikasa ko ang 14t torque gear, o kailangan ko mag magaan pa na bola? Any recommendations will appreciate thank you
Adv 160 user din ako
Need mo mag gaan bola. Okay yan gearing kung solo ka lang at puro patag. Tapos makakadulo lang siya sa mahabang daan.
idol ask ko lang pwede po ba yan sa pcx 150 sa pcx 160??
160 pwede
What is Original size T?
13
Ano tono ng pang gilid mo boss para sa 14t
13x15
Idol,pnu mkakuha torque specs Ng pcx160? Pra pg diy ko,Slmat
May link sa description, bro. Same lang sa engine.
Slmat idol solid u tlga..rs stin lagi
59nm
49nm
Ano po tawag sa pang higpit mo po boss
Torque wrench. May link sa description, bro.
Ang linis ha, pano mag maintin ng ganyan kalinis? Any tips po?
Pinapa motorwash ko lang, bro.
Idol ano magandang power pipe kay adv 160
JVT V3 kaso wala pa pang ADV160.
Boss Pwede mag 14t gear kahit nka cvt panggilid ako na arangkada 14g 15g bola ko tapos 1k center spring lakas ng arangkada kaso 100 lamg top speed
Try mo lang, bro.
Yung dr pully ba pedi lagyan nang grasa dahil hindi nman sya bilog?
Wag, bro kasi kakapitan ng dumi.
kap motobeast.. kakapa set ko Lang ng straight ST mismo kay mazo..
Mofify TD, DF, Pulley.. planning ko sana gayahin ung mismong set mo..
what do you recommend..
90kgs ako na rider..
same ba ng degree si mazo sa df pulley kay ecu tech?
need ko ba mag 14t din?
pati springs ko?
sorry sa madameng tanung.. ikaw Lang kasi maayos mag explain ee.. hahaha.. avid follower kap!
Sundin mo lang muna base set nila tapos adjust ka springs at bola. Stock gear lang para di humina torque.
@@MOTOBEASTPH yep balak ko na mag adjust . kasi 1500 pala ung ksama nung assy.. tapos 1000 ung center.. 16g ung bola ko.. papatuLong ako sana kung saan baseline ulet ako pwede mag adjust pra sa 90kgs na rider.. stock clutch ba.. mag 1200 paba ko ng center? tanggalin ko po ba washer.. saLamat kap! sorry masyado matanung hahaha
@@DaCedPH Iba kasi degree nyan 13.5 kaya baka di pasok sa set ng ECU Tech na 13.8. Pwede mo try mag 1k clutch tapos timpla ka sa bola. Kung kulang sa hatak, try mo Showar GY6 1200.
idol izak ba pangalan ng shoppee na pinag orderan mo at isabela poba yung place nung seller
sana mapansin thanks
Yes, bro.
bro wala na available or dead na ung link@@MOTOBEASTPH
@@DaCedPH Stop production na sila, bro. Alternative is Pitsbike although di ko pa na-try ito.
s.shopee.ph/3fl2nUTbB5
Sir sana magkaron ka ng shop mo. Gusto ko sayo magpa pms sayo nitong ADV 150 ko hahaha!
pde kaya sir ung dr pulley na bola sa click 160
Pwede pero mas compatible siya sa stock pulley.
boss good day baka may top speed naka nito para may idea din kami sa pag upgrade ng motor ko advance thankyou
Meron ako vlog nyan, bro sa flyball tuning.
bro…if use 15t? can u explain? better with 14t or 15t?
14T is good enough.
what tightening touque when use touque wrench for gearbox?
@@poklohdekut23nm
what difference if use ball 13g x3 and 15g x 3 with 14 x 6? tq
@@poklohdekut Can't you calculate the total? Omg
puwed ba yan boss sa click 125 v3? salamat po sa sagot
Try mo yung Racing Monkey 14T pang Click.
Ano reading ng fuel consumption mo Kap sa ganyang set up?
41kpl.
Boss motobeast pano mo nalalaman lahat ng bolt torque nm? Napaka detalyado nyo po mag vlog
May link sa description ng torque spec sheet, bro.
@@MOTOBEASTPH salamat idol
San mo na score bell holder boss
May link sa description, bro.
Bro anu tawag jan sa tools mo na my clickings
Torque wrench. May link sa description, bro.
@@MOTOBEASTPH salamat bro. God bless🙏
pasok ba sa adv150? pwede kaya palit ganyan pero all stock pang gilid?
Iba pang ADV150, bro. 17T
@@MOTOBEASTPH sir saan mo nakuha torque specs ? baka pwede pa link pang adv 150 po
Yuuun new vlog bro 🤘
Waiting sa pipe bro hehe.
Goods na goods po ba gumamit nang highspeed gearing kahit na remap lang at naka panggilid ka idol? Hindi na hirap ang makina na stock?
Hindi naman, bro pero okay lang siya kapag solo lang tapos need mo mahabang daan para maka dulo.
Sir kung mababasa mo to, ano po mas magandang gear para sa click160, stock or high-speed? O magpanggilid(cvt set) muna ako bago mag upgrade ng gearings? Thanksss sana mapansinn
CVT muna, bro. Gearing pang magaan na rider or kapag solo ka lang. Hihina konti hatak.
@@MOTOBEASTPH nagchange na ako ng springs and flyball sir, bka magawan mo ng video ang proper positioning pag combination ang flyball, parang 16g at 19g. Salamat po. Dito ako nanonood pag nag ddiy ako😊
Cllex around cabanatuan ka boss?
chief, ok lng ba yan lagay at stock lahat pa? thanks
Mas okay siya kapag naka CVT set na para mailabas power.
Hnd po ba mahiyaw msyado pg nka gearings po
Bumababa yung rpm pag nag high speed gear.
Ung skin po idol , airblade 160 nka pulley set kalkal ako 1k center , 1200 clutch nkremap pro hirap dumulo halos ntry ko na mgtono ng ibat ibang bola pinaka mtaas ko lmg 124kph straight 16g
Ntry ko nrin po ng 14t pro prng mhiyaw po ang makina idol... Ngtry rin ako ng mas mbabang bola
Idol kmustq nman arangkda ng 14t at dulo
Anu po gmit nyo center at clutch dto sa 14t gear
3\8 size bah gamit mung torque wrench lods or 1\2???
1/2 and 1/4
lods meron kba tiktok accnt, diq kasi mahanap hehe @@MOTOBEASTPH
dapat yong gulong nya sir yong manipis na pang racer para mas tumolin
Hindi na accurate speedometer reading pag ganyan, bro.
Sir paano po kayo makontak
Applicable to sa PCX 160?
Yes.
spark plug link bro thanks
NGK Laser Iridium: shope.ee/2VOJ1ML3mF
Boss throttle body naman next! Haha solid vlog all in!
32mm. 😁
@@MOTOBEASTPH lezgooow! wait namin yan! haha
boss saan kya mka bili nyan ng 24t?
May link sa description, bro.
Pwede din yan sa pcx160 diba?
Yes.
Nice bro.
High speed gear solid
bakit nag papalit ng gear?
nawawala ba acceleration pag nag papalit ng gear?
Tono lang sa bola para ma-compensate acceleration.
hindi siya pang daily??
1k center, stock clutch kung stock ang lining.
Boss naka stock clutch spring kalang?
Yes, bro.
Tono spring. Torque
New subscriber po.😁 Pag nagpalit po ba pang gilid si adv kailangan po ba sir remap?
Optional lang kung gusto mo added performance. Pero syempre doon ka sa legit tuner dapat magpa-remap.
try mo paps mag bawas pa ng bola?
Mag baba pa ng onting bola idol mabigat na masyado ikot tono nalang ng maganda sa pang gilid
Sir pano malaman mga torque ng bolts?
May link sa description, bro.
Omg
Present 🤘
Ilan rpm ng clutch spring mo boss
Stock.
Bro saan kaya ito pwede bilhin? Hindi na kasi available sa shopee
Stop production na sila, bro.
@@MOTOBEASTPH bro last question, same ba yung gear ng adv 160 sa pcx 160?
@@aerialperspective2847 Same lang, bro.
@@MOTOBEASTPH Thank you sa info bro!
Paps, wala na bang ka partner yang 14T gear pagnagpalit?
Wala na, bro. Magiiba reading ng speedometer pag pinalitan yung malaki.
🔥
Sir pag 15T kalkal Pully set 13.8, 13G Straight flyball, NGK laser iridium SP. stock na lahat sir. Ok kayang combi kahit walang remap? Or anu saggestion sir?
Trial and error pero para sakin mas maganda ma-remap.
Solid bro, ride safe!
Kumusta arangkada? Nabawasan?
Adjust lang sa bola kapag nawabawan arangkada.
Naka off ba hstc boss?
Idol may online shop kb kilala makakbili ng mtrt 13t?
Sa vlog ko nun may link, bro.
Bossing san k nkabili ng 14t gear? Salamat
Stop production na sila, bro. Try mo Pitsbike brand meron sa Shopee.
@@MOTOBEASTPH salamat bossing 😊
@@MOTOBEASTPH bossing pasok din ba yung 14t crankshaft n gamit mo sa pcx 160? Thanks
@@Harry11999 Yes. Same lang.
boss hindi ba nakarimap yun
Naka-remap na.
Rock on 🤘
Question boss, lower teeth = more torque, tama ba boss? Rs po palagi.
Yes, correct
Thanks boss, wala pala nabibili online na mababa ang teeth. Palit na lang ng bola para lumakas torque. Rs boss.