Nice...I love Level 5 tools... I'm going to buy it....I wouldn't use red dye for anything...but it's a promo skit.... should have used blue tint and nobody would mention it.....😆
I broke down and bought the hydraulic level 5 tool. It uses a piston to push the mud out for you. problem solved. it's expensive though @@nathanbier2277
We sometimes use chalk line pigment on base-coats and touchups, so you don't miss sanding or where you left off. Finish coat and primer takes care of the slight color difference. He used Alot more pigment than a dude usually would, to demonstrate mud coverage. Get your weight up!! Lol.. 🛠
best to use tint. looks like you have a lot of what ever it is in the plaster. if you've used chalk or food coloring its going to bleed through the paint judging from how bright that is.
Nope never use any kind of colors, Gonna wreck the paint job, And never use dish soap in your mud nether Just mix it right!! And keep it tight, BOOM THAT IS HOW YOU DO IT.
La heramienta no importa si savez usarla es lo que importa yo tengo muchas años usando todo tiempo de heramienta y es lo mismo saludos desde los ángeles 🇸🇻
As I’m sitting here barely able to move after hand taping for 6 days alone…… I’m not a full time taper but I can’t see how I can NOT get all these tools. One job would save me insane time. Only issue is how do you justify charging someone the same price when it takes 1/10th the time to do.
That's business. Your job as a business owner is to make as much money as efficiently as possible. It's not about how long it takes, your hours of work do not correlate to the price. Discuss price up front, tell them you do not work hourly and get a signed contract before starting. I use it as an upsell, tell them, i can be done in half the time and get your build moving forward faster than three guys with hand tools. Builders eat that up, charge a few hundred less than the hand tool guys and finish in half the time. Then you're superman. Especially if they've never seen auto tools. Don't let them in on the secret, but usually the cost of entry prevents most guys here from switching over. Good luck!
@@maxgilbert18 great comment, by doing something long doesn t mean you do it good, and with this job always buy best tools so your efficiany will be best....fast job fast money and do it again
I used red food coloring to dye my texture. Only did it once, red bled through so many coats of paint. Had used blue a ton of times. They sell a mud tint, specifically for drywall mud. Stuff is great. Good for touch up.
Delko Zunder Drywall Banjo Taper with FibaFuse tape (not too pricey and lets you lay the tape on without too much mess and no bubbles) Wish the inside corner roller for a taped inside corner were cheaper though. Use thin setting compound (90min) for laying the tape in, just make sure to clean out the equipment before it starts to set.
@@VC-Toronto I would advise only using 90 minute mud if you're going to add glue into the mud. It'll work much better. And I'd advise staying away from quick setting mud if you're not familiar with it. There are some things to know about it before using it. Like the fact it's very difficult to sand, and it doesn't sand the same as normal mud. It doesn't shrink. Etc
@@emmanuelleallen I've installed acres of board and run miles of tape, and have never had a problem with using 90 minute mud. If you are using it for repairs over a painted surface, then yes, adding some wood glue has merit. I'll use 90 minute to set the tape, setting my corners, for the first coat on top, and for first coat on screws. After that I'll use pre-mix unless it's first coat feathering out a corner. 90 minute mud does shrink, it just shrinks less that pre-mixed. I recently picked up a Can Am flusher set (2.5 inch and 3 inch) and tried them at a friends place. Wish I had bought them years ago.
You must not be a finisher. We use chalk line pigment on base-coats and touchups, so you don't miss sanding. Primer or finiah-coat takes care of the slight color difference. He used Alot more than a person usually would, to demonstrate mud coverage.
Not what we're sayin, @ all. If i have 10 punch-out hot mud touchups to do and im using 20 min set, i'm not trying to overlook anything. Pre 1st coat mark is pencil, 2nd coat is done with pigment and your finish mud covers said pigment. Anybody, who has missed a spot and had to spend an additional 3 coats worth of time, knows the value. Thx..
I need to ho pop my neck and back for that guy. When I was younger I worked fast and hard now I'm getting older and I'm feeling every day of it. I still can run circles around some ppl but I'm almost an old man still out here working
Co to za Arabska robota znowu i wynalazek. Od kiedy sufit malujemy na różowo lub w innym kolorze jak sciany ? 1 raz na 50 robót ? Przez 20 lat robót w Paryżu nie wiem czy 5 razy robilem kolor na suficie. W Pakistanie może tak sie robi w kolorze żeby nie bylo widac pozniej jak muchy sraja na suficie.
@@mikecollins9869 So you're telling me that someone spent 8 minutes in each apartment unit.?! A complete coat in each one. A livingroom, kitchen, bathroom, bedroom (or two) and the closets?? Walls and ceilings? And angles??? What about dragging the machine from one unit to the next!? Mixing the mud??? The material hose and the air line? Does that part count towards the 2 hours?? All this single handedly?!? No! I doubt that! Someone was smoking crack. But I can't figure out if I was him or you. Don't believe everything someone tells you bro. And next time you decide to troll someone, you better have your facts straight 💯 All that system does is make the pusher less tired at the end of the day. Using the regular drywall tools is still faster and a whole lot more portable.
Lol 😂 the room he just started was already finished with 2 coats minimum and sanded before this guy Came doing the edges that were already done . This is like washing your dishes before putting them on the dishwasher
When we tape the angles we use the roller & glazier- this barely covers the tape. No angles on the double but I run the angle box with the 3.5” on the flush. This is pretty widely accepted. The guy in the video is good.
I've been really pleased with Columbia tools. When I got started I bought a budget brand of auto tools called "finish pro" .. well the boxs would leak, the blade-bar would stick, my pump seized up, handle brake snapped, $3500 of tools in the garbage in 6 months. AND they went out of business so warranty was useless. Won't ever go with a budget brand again.
It just keeps getting better. You guys rock. . Not sure about the music.
I think primus my name is mud would of been a good choice
@@RookLuke
Ay no
Ok am 20 years working in tape and bead and this guy know what his doing 👍👍👍👍
Nice...I love Level 5 tools... I'm going to buy it....I wouldn't use red dye for anything...but it's a promo skit.... should have used blue tint and nobody would mention it.....😆
How did you get so much mud to come out? The angle is nice but I've never been able to get it to feed mud like that
Me neither
I cant speak for these guys but i run my mud thinner, lube the gasket before use and i like to use a product called no pock (it glides much better)
I broke down and bought the hydraulic level 5 tool. It uses a piston to push the mud out for you. problem solved. it's expensive though @@nathanbier2277
We sometimes use chalk line pigment on base-coats and touchups, so you don't miss sanding or where you left off. Finish coat and primer takes care of the slight color difference. He used Alot more pigment than a dude usually would, to demonstrate mud coverage. Get your weight up!! Lol.. 🛠
I liked it.
I will try it with soft blue( easy clean)
@@JuanRodriguez-pj1zn Cool.. 😎
Whats that set up you using cost im try this out looks good
That size five cornerhaed looks amazing. My boss makes me use 2.5 during taping and skimming. It sucks. But that size prolly uses up so much mud
Tell me how much does a guy makes knowing how to use those tools
@@joanrock398 $10 hr plus free meth.
@@joanrock398 in iowa a journeyman finisher will make between 25 and 35 per hour
He’s pumping angles with that level 5 over top of angles that have already been pumped. Big waste of time and not true advertising of the tool.
Fica lindo teto rosa rs, esta ferramenta pinta tudo de uma cor só, vcs são gênios. Faz canto, parede e teto, show de bola... Kkk
Essa ferramenta não é para pintura, e sim para barramentos de juntas de Pladur
Very very cool work
Nicely done
Keep the guy who designed the tool. Fire the guy who chose the music.
🤣😂🤣 I second that motion!
Plot Twist: It's the same guy. 👀
So fucking badass pro status! These cats don’t even know why you dye the mud!!! I’m looking to purchase a full set , you’ve inspired me
Why does he dye the mud?
@@uchihazero8635 So you can see what you're angle tool has missed and fill the voids right then making less work for later.
Great tool
Good stuff
Super 👍
Did you add red chaulk?
best to use tint. looks like you have a lot of what ever it is in the plaster. if you've used chalk or food coloring its going to bleed through the paint judging from how bright that is.
Yup. Never red or black. Use a little blue.
Most likely Never-Miss Coloring Gel.
That stuff don't bleed through.
Nope never use any kind of colors, Gonna wreck the paint job, And never use dish soap in your mud nether Just mix it right!! And keep it tight, BOOM THAT IS HOW YOU DO IT.
La heramienta no importa si savez usarla es lo que importa yo tengo muchas años usando todo tiempo de heramienta y es lo mismo saludos desde los ángeles 🇸🇻
Perfect!
As I’m sitting here barely able to move after hand taping for 6 days alone…… I’m not a full time taper but I can’t see how I can NOT get all these tools. One job would save me insane time. Only issue is how do you justify charging someone the same price when it takes 1/10th the time to do.
That's business. Your job as a business owner is to make as much money as efficiently as possible. It's not about how long it takes, your hours of work do not correlate to the price. Discuss price up front, tell them you do not work hourly and get a signed contract before starting.
I use it as an upsell, tell them, i can be done in half the time and get your build moving forward faster than three guys with hand tools. Builders eat that up, charge a few hundred less than the hand tool guys and finish in half the time. Then you're superman. Especially if they've never seen auto tools. Don't let them in on the secret, but usually the cost of entry prevents most guys here from switching over.
Good luck!
@@maxgilbert18 great comment, by doing something long doesn t mean you do it good, and with this job always buy best tools so your efficiany will be best....fast job fast money and do it again
MAGNIFICENT!!!
show how to adjust the anglehead to have more mud on the tape
What did you use to dye the mud?
Probably food coloring lol
Chalk
@@MainnEvent beetroot ;)
I used red food coloring to dye my texture. Only did it once, red bled through so many coats of paint. Had used blue a ton of times. They sell a mud tint, specifically for drywall mud. Stuff is great. Good for touch up.
Maybe they tinted it just for the video, looks kind of cool. Matches the tool also
Eh ferramenta dos meus sonhos 🙏🙌
Eu nao entendi.retoque cor diferente
@@jonascoelho3215 a cor serve como referência de onde e quanto foi aplicado.
where can i buy the coloring
We're 2 order one of those??????
Quantity or quality as usual.
Вери найс, гуд найс🤟😁
4”angle head for people who like to sand… tape with a 2” finish with a 3”
As someone from the UK, what is that you are doing?
He is promoting a tool that spreads mud on walls.
That angle head is HUGE! Lol
I’d hate to know how you describe your dick
@@dkln888 small, very small
@@tylerkrug7719 hahaha I love a team player! Touché, tiny tool ☺️ x
🔥🔥⚒️⚒️
لااله الا الله محمدا رسول الله صل الله عليه و سلم نبينا وشفيعنا وحبيبنا يوم القيامة
Beautiful! Curious...what tools would you recommend for a beginner DIYer who may only do several small to medium projects per year? Thanks again!
Pan 5 inc and 10 inch knife
Delko Zunder Drywall Banjo Taper with FibaFuse tape (not too pricey and lets you lay the tape on without too much mess and no bubbles) Wish the inside corner roller for a taped inside corner were cheaper though. Use thin setting compound (90min) for laying the tape in, just make sure to clean out the equipment before it starts to set.
Don't
@@VC-Toronto I would advise only using 90 minute mud if you're going to add glue into the mud. It'll work much better. And I'd advise staying away from quick setting mud if you're not familiar with it. There are some things to know about it before using it. Like the fact it's very difficult to sand, and it doesn't sand the same as normal mud. It doesn't shrink. Etc
@@emmanuelleallen I've installed acres of board and run miles of tape, and have never had a problem with using 90 minute mud. If you are using it for repairs over a painted surface, then yes, adding some wood glue has merit. I'll use 90 minute to set the tape, setting my corners, for the first coat on top, and for first coat on screws. After that I'll use pre-mix unless it's first coat feathering out a corner. 90 minute mud does shrink, it just shrinks less that pre-mixed. I recently picked up a Can Am flusher set (2.5 inch and 3 inch) and tried them at a friends place. Wish I had bought them years ago.
Darn it Jim I said use the taping compound! Not the cakes pink icing!!
How much is that set up?
1-3k
@@garnetnard4284 fullset here in Croatia around 5k euros
What’s that pink stuff?
Chalk line powder in mud
Pink mud ??
I saw a big dirty blister in one of the horizontal internals!!
Why the mud whit color??
Felipe Contreras skim coat, easier to see if you have imperfections
@@dshel560 Yeah, angles and joints will require more applications and dry time. I would do the screw heads last.
Thanks
Nothing like putting your hand and eyes right up on it I bet you have to go over it by hand and does this come with brake light warranty?
I don't get why the color? Just for the video?
Just so you know it’s applied evenly
whats with coloring your mud? painters must love you
You must not be a finisher. We use chalk line pigment on base-coats and touchups, so you don't miss sanding. Primer or finiah-coat takes care of the slight color difference. He used Alot more than a person usually would, to demonstrate mud coverage.
@@lovellbadgett1965 so if I don't blast colors on my mud I must not be a finish taper ... Lol ok champ
Not what we're sayin, @ all. If i have 10 punch-out hot mud touchups to do and im using 20 min set, i'm not trying to overlook anything. Pre 1st coat mark is pencil, 2nd coat is done with pigment and your finish mud covers said pigment. Anybody, who has missed a spot and had to spend an additional 3 coats worth of time, knows the value. Thx..
That thing sure leaks mud from the side! And I see you have to go over it twice. No thanks. Sticking with my northstar
Your brain leaks poop. Lol. Jokin
My northstar leaks also... just a matter if time.. keep your gaskets lubed..
I'm going with a mudrunner until I get the continous flow system
How much is it?
about $250 USD without the handle
Price tell me
Nice
Nothing going to change the brush
Y los clavos pa cuando?
Never seen pink mud, obviously it dries white but is there a purpose?
Just a visual to show the coverage. Also indicated when dry for next coat
👍
Was that paper tape, Asking for a friend..
👍
#Shermaster tv welcome
what is the purpose of that?
Speed
You make it look easy but it's not all that easy I got one
rs kitna he iska
Nice handle tho.
Pues está con madres si va todo del mismo color si no k chinga hay k recortar todo el cielo o las paredes depende k vallas a pintar
Es tinte en la masa no pintura. Es para dar terminado en el angulo. No para pintar
Si ya ví es k acá en el rancho no tenemos esa tecnología todavía hahaaaa...dejando de broma está con madre te ahorra chingo de tiempo
Top
👌
That seems cumbersome and iffy
Ппц штуковина где можно достать?
I need to ho pop my neck and back for that guy. When I was younger I worked fast and hard now I'm getting older and I'm feeling every day of it. I still can run circles around some ppl but I'm almost an old man still out here working
Dang!
Funny tools..
Co to za Arabska robota znowu i wynalazek. Od kiedy sufit malujemy na różowo lub w innym kolorze jak sciany ? 1 raz na 50 robót ? Przez 20 lat robót w Paryżu nie wiem czy 5 razy robilem kolor na suficie. W Pakistanie może tak sie robi w kolorze żeby nie bylo widac pozniej jak muchy sraja na suficie.
Chingon.
Ak milega kiya
Did anyone else notice that they didnt even finish drywalling the window seals and corner bead before taping? I would get fired if I did that.
You don’t have to if they’re going to use wood and trim
@@DavisThaDoN lol that guy is stupid
Niezłe...... Jaja
حلو
Time of month
Shit, and pink? Seriesly?
Nice but lose the noise 🤷🏻♂️
Too much red in the mud
No good
Yodoes anyone here no the meaning of apla tech ....
Jesus
No, what does it mean?
We had that. It was easier to push a box but man was it slow! Had to drag an airline everywhere I went.
@@precision_Air I was on the phone with the creator of alpha tech... buddy coated 15 apartments (an entire floor) single handed in 2 hours. Slow??
@@mikecollins9869 So you're telling me that someone spent 8 minutes in each apartment unit.?! A complete coat in each one. A livingroom, kitchen, bathroom, bedroom (or two) and the closets?? Walls and ceilings? And angles???
What about dragging the machine from one unit to the next!? Mixing the mud??? The material hose and the air line? Does that part count towards the 2 hours?? All this single handedly?!?
No! I doubt that! Someone was smoking crack. But I can't figure out if I was him or you. Don't believe everything someone tells you bro. And next time you decide to troll someone, you better have your facts straight 💯
All that system does is make the pusher less tired at the end of the day. Using the regular drywall tools is still faster and a whole lot more portable.
widać było że niedomalowane
Lol 😂 the room he just started was already finished with 2 coats minimum and sanded before this guy Came doing the edges that were already done . This is like washing your dishes before putting them on the dishwasher
You don't know nothing about finishing drywall.
When we tape the angles we use the roller & glazier- this barely covers the tape. No angles on the double but I run the angle box with the 3.5” on the flush. This is pretty widely accepted. The guy in the video is good.
??????poderia ser melhor...
worthless piece of iron,do not buy!
fy
jingle bells would have been a better song
So glad I’m out of that work. I hated every second of it
Micky D management material!
Lose the music its unnecessary
Five thumbs down for music. Screw this techno garbage. Although with sound off I enjoyed. I utilized my freedom of not listening
Im faster with a 12in,.. and. He's not even getting the corners right that tool is stupid!!!!!!!
Level 5 is shit. If you’re serious about increasing production, spend the money and buy Columbia, you will get what you pay for
I've been really pleased with Columbia tools. When I got started I bought a budget brand of auto tools called "finish pro" .. well the boxs would leak, the blade-bar would stick, my pump seized up, handle brake snapped, $3500 of tools in the garbage in 6 months. AND they went out of business so warranty was useless.
Won't ever go with a budget brand again.
What’s with the idiotic crazy ass techno crap??
Not very good on internal or external corners