DIY: Cut Square Glass Bottle In 3 Simple Steps
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2016
- In this video I'm cutting square glass bottle by using regular glass cuter and thermal stress (hot and cold water).
Glass bottle cutter: bit.ly/34nM9e8
You could support me and my content creation by buying Well Done Tips official outfit: teespring.com/welldonetips
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips. - แนวปฏิบัติและการใช้ชีวิต
![🔴 EASY CUTTING BOTTLES 👉 HOW TO MAKE a homemade Glass Bottle CUTTER [SIMPLE and EFFECTIVE]](http://i.ytimg.com/vi/nSqBm4cOH-A/mqdefault.jpg)
Note: Beautiful and almost perfect work. We leave the alert for you who do not have professional protective equipment such as glasses, masks (it cannot be any one), gloves etc. The dust produced during the making of this work is dangerous and deadly. Never do this type of work without protection because in a few days you will see the effect of the glass dust entering your nose and also in your throat, causing a groove that can bleed your upper airways. If that same dust hits your lungs, you will need urgent medical attention. This is a warning from someone who wants your good.
Thanks!
Good to know! Thanks!
Comment should be pinned
"Crystalline Silica
Glass is manufactured using sand otherwise known by its chemical name “silica dioxide”, forming two distinct groups of silica, crystalline and amorphous. Although glass is silica, it is not crystalline silica. Crystalline silica in the form of quartz has longterm health risks and can lead to silicosis and other respiratory diseases. The World Health Organization classifies crystalline silica as carcinogenic to any animal or human.
Amorphous Silica
However, glass dust is classified as amorphous silica dioxide. This type of silica poses no health risks. Why? Well, during the formation of amorphous silica dioxide, the rate of the cooling process is sped up immensely. This causes the molecules within a given material to have no alignment or arrangement. As a result, the lack of alignment or arrangement reduces the toxicity levels in the materials. In fact, silica is found in foods and drinks today such as water, whole grain bread, beer, and green beans. It is even used to strengthen elastomers in products such as toothpaste, resins, and paints.
[...]
Glass dust is not an inhalation hazard; therefore, a respiratory mask is not required."
From Terrazzco "OSHA Silica Rule: Misconception of Glass Dust"
I would still wear an ffp1, because its common to have one at hand since covid and its still dust you are emitting, but it does appear not to be as harmful as most think.
"Be prepared to fail." Nice. Having realistic expectations reduces disappointment.
he's just talking about the idiots among us.
He did not use rubber bands or tape when cutting. I reckon that's why he failed
A suggestion to improve the process: With a small paint brush, apply a light oil (e.g. cooking oil, motor oil) to the area that will contact the glass cutter AND dip the glass cutter into the same oil. This should allow the glass cutter wheel to move more freely and not become jambed with tiny glass particles as the bottle is rotated.
I think this is a joke, that wheel needs to scratch not to glide
@@leonardleonard890 You actually use glass cutter oil, look it up.
No this is correct. Any light machine oil or wd40 will do. However you can buy cutters that hold the oil in the handle. The wheel is spring loaded and when depressed on the glass supplies a nice thin stream oil. These produce superior scores.
Using oil keeps the cut open, I always use oil when cutting glass of any kind not just bottles 👍🏻
Nice suggestion. I have two whiskey bottles here that I wanted to make into glasses. This is the first video and response that I checked out, win win. I'll go expensive tomorrow and get my glass cutter from Lowes, not harbor freight. I'll try the cheapo on beer bottles
Thank you for taking the time to post this very helpful video. The extra tips like sanding, smoothing and fixing mistakes are really helpful. THanks again.
One the the best bottle cutting videos. Very easy to follow perfectly. Thank you.! Cant wait to try this
Best bottle cutting video I’ve seen and I have watched many. Thanks!!!!!!!
For best results do not attempt after immediate consumption of bottle contents.
Nathan Scantling 😂😂
😂😂😂
Good!
hahahah:)
I thought he could’ve at least paid homage and added a shot of JD to the coke !!!!!!!
Nice video...best bottle cutting and finishing video out there!!!
love the tutorial. especially the kettle boiling! helped me perfect my tea making skills drastically
👍
thank you, great video, I like your work methodology, very organized, I am inspired!
Thank you for sharing this info. I am doing some bottle crafting with husband"s empty bottles and just found this video!
THANK YOU FOR YOUR SENSIBLE, INGENIOUS AND INFORMATIVE INSTRUCTIONAL VIDEO!
You answered my question with out asking.
Thanks for mentioning the sandpaper. I was wondering how to smooth the sharp edges to make it safe for use. Great video!
Very nice tutorial! (Y) I also like the soothing and calm voice going like "don't worry of you don't succeed, happens! Just try again. Don't worry." :D so sweet :D
I simply adore your charming accent !
Very helpful too
I have a square vase that broke
thank you for making this videos, i've only ever seen vids on how to cut round bottles. this is such a help, thank you so much
Thanks for the tutorial. Hope I can transform the throw away bottles into beautiful art pieces now.🙏💕
That so simple. thank you for sharing this :D
Thank you... made it look so easy. Great tip about single scoring glass. I have double scored on plastics, but only with a straight edge. Glass not so forgiving. Cut, sand, done.
Genial Maestro !!!
You are a Master, this is great !!!
Thanks from Ciudad de México and greetings for all the audience.
Awesome! Good to know this can be accomplished without special tools, and with some basic tools.
117cyxfqqoqp
unbelievable! 2 hours ago I kept similar bottle and thought how to cut it precisely)))
Dmitry Lyashuk
I see your name Dmitry and I'm a believer.
cool that is unbelievable ! And how did you find this video ? did you search it ? what a coincidence
If we belief about who realy we are, we`ll live amazing life experiences for ever. We are already all conected but we live as in short circuit.
Your phone was watching you.
Great job! I had about the same idea and made some cool signs with my cut bottles. Thumbs up
Your tutorial is the best one on the Tube!! Thank you so much
unique vase, total slav moment.
i was waiting for him to pour jack into the cola XD
Me too! :-)
What if he originally emptied the jack into the cola bottle, and then he poured it back in?
I was waiting for him to pour Jack into this glass.
👍👍👍
Jajajaja me too!
Thank you for this video. Everything is described briefly and to the point. Thanks for the information about the gradation of sandpaper - unfortunately, the Internet gives different values, but the effect from your video leaves no doubt. Greetings from Poland
Very NICE. Love the way you safely use the sandpaper.
"crack where you don't need it" made me smile
You're holding that cutter so tight - your hand is turning purple ! Good cuts are hard to get on bottles. I use a dremel tool with a diamond wheel. Thanks for the video.
Do you cut it all the way off with the dremel? I have one but idk if I have a diamond wheel
@@thewakinghero wondering same thing
@@thewakinghero your asking CHATTY KATHY
The best tutorial for cutting glass bottles. Thanks so much
A really good video, I been looking since a long time ago how to cut an square bottle.. Thanks for sharing this great video
Take off the cap before, that will give you a smoother result on your cut and a higher success rate. You can hear it pop once it parts in your video this is because when you hit the bottle with hot and cold water you will have a pressure build up inside the bottle with the cap on, if you take the cap off you eliminate this and will get a smoother cut. Try this method and let me know how it goes ;-)
no. Heating the bottle causes the glass to expand and then pouring cold water onto it makes the glass shrink suddenly causing the crack to split open. this technique works alot better if you heat both sides of the score line and then pout cold water only onto to side which will be discarded.
Yeah, as mentioned, you are creating a weak point in the glass, and then using temperature changes to stress the glass (via expansion and contraction). If things go well, the glass fails along the weakened line..
That said, internal pressure would probably make the bottle break more easily, although I don't know if that translates into a more clean break.
Ed Va Because you would have to boil way more water.
That was a very good tip! Thanks!
Great
Best Video I've ever seen on the topic.
I subbed.
Thank you!
Ha! I watched it before I looked at the name of your channel and I was coming to comment to say “well done!”😄👍🏼
I appreciated your method, showing imperfections and also different uses. Well done!👍🏼👍🏼
there was some drops of whiskey left in that JD! :)
I keep cracking mine so I’m now having to drink another bottle. Hello I’m joe the reason I’m an alcoholic is because of a TH-camr teaching me how to break jack Daniels into two pieces
This got me good
The best DIY glass cutter demo I found in TH-cam. Bravo!
I would say it really isn't. The best way to cut the glass bottle is to use the wire and DC power supply.
Really helpful. Too many bottles in my room. Now I know what to do with them. Thanks 👍
...2:34 you scared off a poor mosquito! :D
De inglés no entiendo absolutamente nada perdón me rectifico solamente Hello Bye y tenkiu pero entendí todo a la perfección tú muy bien 👍😘
Que se tiene que hacer? Xc
muchas gracias por compartir, te han quedado perfectos, estoy encantada con el metodo que expones, voy a probarlo
This was totally cool to watch and more importantly a great project.
When the bottle breaks at a bad angle , that is most likely because you had a ( Skip ) in that spot when you scored it with the cutter.
I say this because I worked in a glass shop for 12 years , so I know a little about glass.
Cool tutorial tho 😎👍🏾
@David Lee
I have drilled holes in bottles sides , bottoms , necks so I think I know what I said to be true. How many bottles/glass blocks/flat glass have you ever split apart or drilled holes in ? I've done hundreds. And yes splitting one apart is not that big a deal , his cutter ( skipped and he went back and tried to rescore over the same line , sometimes it works , but usually it causes a bad run because glass isn't ment to be scored more than 1 time in the same spot.
Doesn't matter what shape bottle it is. Fill it with engine oil (new, but cheapest will do) up to the level you require to cut. Plunge in a red-hot poker quickly and (8 times out of 10 - mileage may vary) the bottle will shear at the oil level. A good fine diamond file can tidy up sharp edges.
Try to ensure oil doesn't touch the sides when you pour (funnel) - important to get level right first time - absolutely no trace of oil above the line.
I've used this method for years to get vases from bottles.
I've never heard of this and now can't wait to try it, probably this weekend! You should make a video, I'm sure there are many who would like to see this in action!
That looks like its fresh out of a factory mass produced. It looks that good. Bravo
WOW. Impressive. Well explained & demonstrated. Thank you.
it works better if you clamp the glass cutter to the jig so you can hold the bottle with both hands
Ivo Kolarik
good idea
If you add just a touch of oil to the cutting wheel of the glass cutting tool it will make better lines and not grit grind the glass up leaving a smoother edge
My CR Laurence glass cutter is self oiling. I have been playing with glass for years, I worked in a glass shop as a field Manager.
Right on! Thanks for the video!
Awesome tutorial, thanks for the detailed steps.
hello bro thanks for sharing this video may i know where to get the Cutter as show in this video thanks you
Happy Miow He said that: "I am using regular glass cutter, which you can get in any hardware store".
o....thanks
Tip: You can just use a hose clamp as a guide. Just make sure the band is wider than the adjustment drive or use another band without the drive and tighten down with one that still has the drive.
Another technique is to use a hose clamp and score all along the bottle except the part where the worm drive is and then readjust the band so you can score the rest.
Finally, I skip the water step, I use a Lazy Susan turn table and spin the bottle while precisely hitting the score line with micro-torch. It's a lot faster.
The sandpaper starting with a rough grit covers a multitude of sins.
Happy Miow k
Johann Fuchs usjdjdjxkxjcjxjdjdjdjdusuzuxuriduzUjzdjsjjjjjjmqj ufifudejruwusiaooodď§vçß
Disclaimer: no Jack was harmed in the making of this video!
Dear Mr. Well Done Tips. This is the Safest, Simplest method in all the videos i have seen. Truly Well Done. Thank you for sharing.
i really like that. never thought of cutting a liquor bottle before . really cool.
Remember gloves when working with glass!!!
I'll try and remember my gloves. I think they're in some cabinet or something, but guess I'll find out when I remember them. Unless I'd have to wear them... then I'd be in trouble.
Lasse Ibsen i
And goggles ,incase of shatter
No
Safety glasses too
It looks to me, that you have way too many of those bottles laying around... I wonder why it is... Hic!
hhhahahahah
😂😂😂
Sounds like he's either Russian or Ukrainian. Either way, they can pound the liquor!
Why r u watching vids about JD in youtube man? HIC. Oh come on whe all hicsters here.
@@josephsmith961 - of course ,,, what a load of crock.... you would be an exceptionalist American ?????
Awesome, I'm going to try this. Thanks!!
Thanks for that great tip!
All the drinks in my new cup taste like blood!
Kim Cornell 😆😆😆
Did you Polish the edges ??
i think you just skip the last step XD
This is natural..Happens all of time... Think nothing of it... This is how we protect our lips from bruel winr wins.That's why you use glass. So you see when you have let too much blood escape from your lipss... Apology I have new cup.
Third Herd
Then it should be the best one in the house to use for knocking back Bloody Marys with and edge.
When the top came off it jump scared me 😂
nice ideas with glass bottles
Thanks for all information and I am so happy to see you didn't waste water
3:42 RIP headphones users
Its 2:30 in the morning and I'm watching an instructional video by a slightly foreign man on how to perfectly cut a glass bottle of Jack Daniels... So I only have but two questions, 1) What exactly am I doing with my life? And 2) Does it work on glass bottles of different brands?????
It's actually a pretty awesome video. I LOVE THIS. I believe he is Eastern European. Just guessing.
He's not Russian, or that bottle would have been vodka. Square or not square.
THANKS FOR YOUR INSTRUCTION...HAPPY 2021!
thanks for the tip, man 👍
You could attach a string to the top piece and wear it like a birthday hat.
Fill the bottle with engine oil to the cut line. Dip in, red hot metal poker. It will separate at the cut line.
You don't even need that much oil. Fill in with water, add a few drops of any oil to cover all of water.. touch oil with heated piece of metal.
OpossumPetya Can you explain how it works? Oil transferring heat better than water?
yes, oil will heat up instantly, but you need to shock the glass only in one place, so you only need oil in the place where you want to "cut" the glass. and because oil will float on top of water you can use water to bring oil to the needed place. and for better results (for faster heating of oil, to have better shock) use wide piece of metal, like thick razor blade, or similar shape piece of metal.. once heated touch the oil with flat side of the metal piece.
OpossumPetya Thank you! Quite interesting!
Thanks, Mercy, Danke, Gracias!
I like your creative videos. thanks for the great ideas
Сильный славянский акцент...
He is from Lithuania.
Method the same as on round bottle.
Дмитрий Староверов Almost the same. It is more complicated and difficult. round bottles do not face uneven cuts!
You can make a different type jig for round bottles, one that allows you to spin the bottle in place while holding the cutter steady. The rest of the process is pretty much the same tho.
Rotating the score above a candle flame and then going around it with an ice cube works perfectly. Same principle as my vintage K-Tel bottle cutter that still works great.
Thanks for your video. Helped me a lot.
I’ll never use these 3 simple steps, nor get them 5minutes back .... damn you recommendations
And the Germans said that Slavs never contributed to anything....
Excellent video!!!! very helpful 😊
Wow, thanks for showing this.
For ultimate results use two shots of Russian vodka prior to application
Tak , Nasdrowie !!
This guy sounds like he's a living, talking Google translator.
Thank you for sharing very in formative x
Nice tutorial in simple easy to follow steps, Thank you
great way to cut your hands
Claire B hiiiii
Claire B hiiiiiiii
Claire B b
Claire B ..0
man that was awesome I'm gonna try it hopefully I get it right
thx...
what a great idea ...thanks for sharing 👍
you should really wear some gloves...
Hi this time I will show how to Cut Square Glass Bottle In 3 SIMPLE STEPS (keep the last three words in mind):
Step 1: Find a glass bottle
Step 2: Create a Simple 2 piece jig
Step 3: Find a workbench clamp
Step 4: Use the bench clamp to clamp the jig to a worktable
Step 5: Start cutting!
Step 6: Start Boiling water
Step 7: Wait for the water to Boil
Step 8: Pour the hot boiled water onto the glass cuts (over a bucket;)
Step 9: Take a bottle of cold water and pour it on the glass cuts immediately
Step 10: Might not work...so keep pouring!
Step 11: Doesn't really cut straight (might not cut all the way, give a little tap to finish the process)
Step 12: Start to sand your glass now, so that you don't go to the hospital with a finger missing or a torn lip ;)
Step 13: Try to find something to do with this whiskey bottle!
Wow, that sounds like way more than 3 steps... Phew, clickbaits are always there!
Not everyone is a dimwit ;-)
Holy shit what a dumb comment OP
Thanks . 😊I'll put into practice
good job ...professional work..Thank you
Yikes! People - if you cut glass, for christ's sake, wear protective eyewear!!
Mate you are better than the best . I'm missing all those cool bottles which I throwed to trash 😔 but no more 😄
Simple and great,, thanks!
mate, fantastic idea. thank you
Thank you for detailed explanation.
Awesome idea, thank You a lot !!
Thank you so much. Very helpful the video.
great and innovative work! cheers and happy new year 2022, Jan 3.
thank you very much for your information and your honesty salute