Man Keith this came right on time. Ive been learning about dynamic interfaces, SSID's and WLC's. I just did a video on my channel for them and im going to download this lab to practice.
Years later and this is still a good one. A little tricky with some of the settings that were wrong. At the end it left me feeling a little silly , when I figured it out. So glad to have done this as it solidifies that even the tiniest setting matters. Thanks again. I have been watching you for years. You assisted me with Network+ with the explanations of some of the topics. Keep doing what you are doing. You a legend, and a treasure.
Hi Keith, I did it. Before seeing this video. I thought to rebuilt it from scratch and got stuck while creating interfaces on WLC for Vlan20 and vlan10. Now I watched it.i am going to build it from scratch now. Thank you.
Thank for this. I was having a lot of issues setting this up. The WLC would stop pinging when rebooting after the initial configuration and couldn't figure out why (not sure if this is the issue you are referring to). This video helped me to understand a lot more than reading this subject. I was able to solve the issues yay!. Although, the corp cellphone took me a minute to figure it out hehe
Keith your videos are the best, I have not tried the lab yet but I did notice (or were you leaving a clue?) that in the virtual wlc you did not appear to link the ssid/guest network to the vlan (20?) which you had set up previously. Again this is great info and your presentation style is amazing, keep up the great work.
Hy man, i try but it is very hard for me... I configure interfaces to be trunk, but that wasn't the entire problem, i try other strategies but i can t figure it aut ... Plese help me with some tips... 😔 It's very frustrating
I almost cried when I couldn't get the employee phone connected to the corp wifi, I kept thinking it was something to do with the VLANs, but I figured it out, just! I need to pass my CCNA soon :'(
1) I did troubleshoot and fix the lab, it was awesome thank you, and I will go watch the walk- through for any additional insights. 2) Thank you so much for sharing what the issue is with tagging on the trunk to the WLC. I have worked on a few labs where the management interface is set to vlan id 1 connected to a switch port set to trunk with vlan100 set to Native, and that works, until I decide the management interface should be set to the management vlan, at which point I lose connectivity to the wlc from the management pc. I was scratching my head as to why, if it was a PT thing or WLC thing that I didn't fully understand. 3) You clearly put a lot of man-hours and creativity into finding a way to make this demonstration possible, thank you :)
@@mariusrostand8329 Keith does provide a walk-through of the solution here th-cam.com/video/YzAxl1DHciQ/w-d-xo.html or, if you would like to reach out to me on the discord server I may be able to try answer any specific questions discord.gg/6Pgrqsx
This is awesome. Thanks for all of your efforts. Can you please tell me , how did you add all the notes and image on your packet tracer file. Thanks a lot
Thank you for the question Avijit Deb Nath. I changed the background picture in PT to use an image that I made that included the graphic of my logo, and the instructions.
Hi Keith, I love your videos and presentation, always with smile. I was able to figure out everything except port but I found bandwidth of wireless end devices 300mbps and when I add a new it show 11mpbs only.
Hi Keith, I really appreciate your generosity for sharing all this valuable knowledge. I am working with a large enterprise in San Diego as a Network Engineer and I have access to the Cisco account from where I can download a legal image for vWLAN but I am not sure which version should I go for to replicate 8510 Controller being used in our organization. Please share the download link and walk us through the installation process on VMware Workstation by creating a video on this topic as soon as possible. Thanks!
OMG I was about to say can we do real equipment instead of packet tracer....cause for getting a job in real life I can't just say, Oh I never touch a router in my life but I done it on packet tracer or GNS3, I'll be call a paper CCNA and then laugh out of the room. But luckily your awesome and used real equipment... could please do more physical lab training instead of all this emulation simulation stuff....Thank you for the AMAZING content you always put out
Thank you for sharing, the interesting content, that was the subject of my exam last week! Question: why sw1 and sw2 in your topology? as it doubles the configuration of valns and trunks. just MLS1 is sufficient.
Those switches simulate access layer switches connected with trunk links to the multilayer switch MLS1 which is basically located in a control room, far away from access layer switches and APs in real life topology.
@@KeithBarker At school, we have physically implemented a centralized architecture with 1 router, 1 switch, 1 controller and 1 Ap and a radius server. we can replace the router with a firewall
So the CorpWifi uses WPA2+802.1x. However in Packet Tracer, when selecting 802.1x on the wireless employee device config, it requires you to fill in the WEP key field too for some reason... Was that your experience too? I'm wondering if it's a bug edit: Oh oopsI misunderstood how it works. Client uses the WPA2 account setting, not the 802.1x account setting.
I'm done, problem about port shutdown, power pluging, SSID inactive, incorrect, problem on AAA server such as username, port... . thanks you for very much.
Got both smartphones working but not RADIUS. PT kept asking for a WEP key which I didn't set up, so it was strange it kept asking for that. Great lab, though. Stumped me. Be great to see what the RADIUS setup is supposed to look like.
Thank you Hank Foss for working on that lab! Sometimes PT acts up. In the troubleshooting labs, sometimes I have the incorrect port (between server and RADIUS client). Occasionally I will completely remove the RADIUS pieces, then put them back (to verify them) especially in PT. Way to go on the lab. I think there is a video walk through for this lab in the PT playlist.
@@KeithBarker I am also struggling to understand connecting a smart device to CorpWiFi using 802.1x because of the WEP key. Packet Tracer demands the key be in HEX, but I configured the key with Cisco!23
Thank you for the question marius rostand. Save your config in packet tracer, at the point you are stuck, DM me on my Discord server and attach the file, and I will take a look.
Fix all, but not dhcp. I'm super sad. I excluded dhcp on wlc, not necessary at all. First check was the helper address, but it was right. To me everything was right. Let's see how stupid am i. By the end of January my ccna exams waits for me!
Ahahahaha, just watched the solution video and dunno how, but packet tracer is the guilty! I fixed the lab but dunno how dhcp is broken. There was no dhcp issue to configure! What a buggy application jesus!
Cool Studio Man !!! Great AV quality , and Thank you for sharing the knowledge which is always in demand :)
Thanks for watching!
Man Keith this came right on time. Ive been learning about dynamic interfaces, SSID's and WLC's. I just did a video on my channel for them and im going to download this lab to practice.
Awesome NetworkBruh!
Thank you Keith for uploading this packet tracer lab
Happy to do it, thanks for the feedback Umair
start watching mr. keith barker, from 2017 up to now
and I'm a fan,
Thank you Rome
Years later and this is still a good one. A little tricky with some of the settings that were wrong. At the end it left me feeling a little silly , when I figured it out. So glad to have done this as it solidifies that even the tiniest setting matters. Thanks again. I have been watching you for years. You assisted me with Network+ with the explanations of some of the topics. Keep doing what you are doing. You a legend, and a treasure.
Thank you Drink The Cool-Aid!
I did it, loved it, thanks!
Thank you LegionHelium!
Hi Kaith... thanks buddy 😊
You are great man all.videos are so satisfying....i learnt a lot ......watched video straight 3 hours
Thank you Sameer!
I did it on my own. Slightly tricky :) Thank you! Sir
Thank you acenewark for working on that lab! Hands on practice is one of the best ways to build your skills, and get better. Thank you!
Excelent wireless labs !!! you have a new subscription . Congratulations from MX
Awesome, thank you! Welcome.
Thank you Keith....
Great video, we need more about WLC :)
More to come!
Awesome Jump links.
Glad you like them!
I would love your walkthrough...!! Thankyou for the video.
Thank you Muhammed. Here is the walk-through video th-cam.com/video/YzAxl1DHciQ/w-d-xo.html
Did it... :-) Awesome lab
Thank you Michael Hansen for working on that lab! Hands on practice is one of the best ways to build your skills, and get better. Thank you!
Hi Keith,
I did it. Before seeing this video.
I thought to rebuilt it from scratch and got stuck while creating interfaces on WLC for Vlan20 and vlan10.
Now I watched it.i am going to build it from scratch now.
Thank you.
Thank you M Charan Sai!
Great Lab!
Thank you Paul
Great video, Keith. I look forward to attempting to resolve the issues. I would defenitely like to see a walk-through video. Thanks.
Noted! Here it is th-cam.com/video/YzAxl1DHciQ/w-d-xo.html
Thank for this. I was having a lot of issues setting this up. The WLC would stop pinging when rebooting after the initial configuration and couldn't figure out why (not sure if this is the issue you are referring to). This video helped me to understand a lot more than reading this subject. I was able to solve the issues yay!. Although, the corp cellphone took me a minute to figure it out hehe
Great to hear!
Keith your videos are the best, I have not tried the lab yet but I did notice (or were you leaving a clue?) that in the virtual wlc you did not appear to link the ssid/guest network to the vlan (20?) which you had set up previously. Again this is great info and your presentation style is amazing, keep up the great work.
After you work on the lab, here is the walk-through solution video. th-cam.com/video/YzAxl1DHciQ/w-d-xo.html
Enjoy.
I did it! thanks a lot :)
Hy man, i try but it is very hard for me... I configure interfaces to be trunk, but that wasn't the entire problem, i try other strategies but i can t figure it aut ... Plese help me with some tips... 😔 It's very frustrating
Here is the walk-through video th-cam.com/video/YzAxl1DHciQ/w-d-xo.html
I almost cried when I couldn't get the employee phone connected to the corp wifi, I kept thinking it was something to do with the VLANs, but I figured it out, just! I need to pass my CCNA soon :'(
I did it! :)
Way to go Christian Carlo Mercado!
1) I did troubleshoot and fix the lab, it was awesome thank you, and I will go watch the walk- through for any additional insights. 2) Thank you so much for sharing what the issue is with tagging on the trunk to the WLC. I have worked on a few labs where the management interface is set to vlan id 1 connected to a switch port set to trunk with vlan100 set to Native, and that works, until I decide the management interface should be set to the management vlan, at which point I lose connectivity to the wlc from the management pc. I was scratching my head as to why, if it was a PT thing or WLC thing that I didn't fully understand. 3) You clearly put a lot of man-hours and creativity into finding a way to make this demonstration possible, thank you :)
Happy to do it, thanks for the feedback Morgan Scott.
could you please help me solved that ?
@@mariusrostand8329 Keith does provide a walk-through of the solution here th-cam.com/video/YzAxl1DHciQ/w-d-xo.html or, if you would like to reach out to me on the discord server I may be able to try answer any specific questions discord.gg/6Pgrqsx
Thank you
Happy to do it, thanks for the feedback wesleysish.
I did it!!!
Thank you Ayodeji Oyekunle for working on that lab! Hands on practice is one of the best ways to build your skills, and get better. Thank you!
Wait..a Discord... uweeee im in =)
I got it !
Nice work Dyshun!
This is awesome. Thanks for all of your efforts. Can you please tell me , how did you add all the notes and image on your packet tracer file. Thanks a lot
Thank you for the question Avijit Deb Nath. I changed the background picture in PT to use an image that I made that included the graphic of my logo, and the instructions.
I did it!
I would like to see a walk through as I had a user to add somewhere and am wondering if that was needed.
Way to go Nate.
Here is the walk-through th-cam.com/video/YzAxl1DHciQ/w-d-xo.html
Hi Keith,
I love your videos and presentation, always with smile. I was able to figure out everything except port but I found bandwidth of wireless end devices 300mbps and when I add a new it show 11mpbs only.
Thank you, my guess would be a PT issue there.
Keith can you manage all the AP's from the WLC or do you need to logon to each to administer them?
Thanks Barker,
I have a question plz,
if we have 3 subnet and the vlan 30 is presented on 3 subnet, how we can do it in WLC?
Hi Keith, I really appreciate your generosity for sharing all this valuable knowledge. I am working with a large enterprise in San Diego as a Network Engineer and I have access to the Cisco account from where I can download a legal image for vWLAN but I am not sure which version should I go for to replicate 8510 Controller being used in our organization. Please share the download link and walk us through the installation process on VMware Workstation by creating a video on this topic as soon as possible. Thanks!
software.cisco.com/download/home/284464214/type/280926587/release/8.5.161.0
OMG I was about to say can we do real equipment instead of packet tracer....cause for getting a job in real life I can't just say, Oh I never touch a router in my life but I done it on packet tracer or GNS3, I'll be call a paper CCNA and then laugh out of the room. But luckily your awesome and used real equipment... could please do more physical lab training instead of all this emulation simulation stuff....Thank you for the AMAZING content you always put out
Happy to do it, thanks for the feedback j serr.
Thank you for sharing, the interesting content, that was the subject of my exam last week!
Question: why sw1 and sw2 in your topology? as it doubles the configuration of valns and trunks.
just MLS1 is sufficient.
Those switches simulate access layer switches connected with trunk links to the multilayer switch MLS1 which is basically located in a control room, far away from access layer switches and APs in real life topology.
Good question! Wanted to add a bit of access-layer flair to the PT lab.
@@KeithBarker At school, we have physically implemented a centralized architecture with 1 router, 1 switch, 1 controller and 1 Ap and a radius server. we can replace the router with a firewall
Hello Mr Keith
Please can you show us how to configure Cisco 850 wireless router
Hey Keith. Thank you so much for all info, can you tell me what software you are utilizing that has the pen you use to explain things! Thank you
Thank you for the question Fouad, it is called epic pen. epic-pen.com/
@@KeithBarker Thank you. You are the best !!!
So the CorpWifi uses WPA2+802.1x. However in Packet Tracer, when selecting 802.1x on the wireless employee device config, it requires you to fill in the WEP key field too for some reason... Was that your experience too? I'm wondering if it's a bug
edit: Oh oopsI misunderstood how it works. Client uses the WPA2 account setting, not the 802.1x account setting.
I'm done, problem about port shutdown, power pluging, SSID inactive, incorrect, problem on AAA server such as username, port... . thanks you for very much.
Thank you Heng KAING for working on that lab!
Got both smartphones working but not RADIUS. PT kept asking for a WEP key which I didn't set up, so it was strange it kept asking for that. Great lab, though. Stumped me. Be great to see what the RADIUS setup is supposed to look like.
Thank you Hank Foss for working on that lab! Sometimes PT acts up. In the troubleshooting labs, sometimes I have the incorrect port (between server and RADIUS client). Occasionally I will completely remove the RADIUS pieces, then put them back (to verify them) especially in PT. Way to go on the lab. I think there is a video walk through for this lab in the PT playlist.
@@KeithBarker I am also struggling to understand connecting a smart device to CorpWiFi using 802.1x because of the WEP key. Packet Tracer demands the key be in HEX, but I configured the key with Cisco!23
use WPS2, check username on server, change server port if it is different from WLC.
@@hengkaing2665 Thank you! I now understand there is a difference between the options. It connected right away!
Hello dear,
I need a cisco training and have the training certificate by you, tell me how I can do and I feel good in French
heay Keith i need the solution i could figure out as har as i try thx
can this be adapted to used with any home wireless router
Thank you for the question. Most home router/wifi devices don't support using a RADIUS server with AAA.
Why dont u leave native vlan as default(vlan1)
hi Mr barker , i id not succeed on that t-shoot, all the port is ok greend but i still not have good ip address on those phones,
need you help please
Thank you for the question marius rostand. Save your config in packet tracer, at the point you are stuck, DM me on my Discord server and attach the file, and I will take a look.
Fix all, but not dhcp. I'm super sad. I excluded dhcp on wlc, not necessary at all. First check was the helper address, but it was right. To me everything was right. Let's see how stupid am i. By the end of January my ccna exams waits for me!
Ahahahaha, just watched the solution video and dunno how, but packet tracer is the guilty! I fixed the lab but dunno how dhcp is broken. There was no dhcp issue to configure! What a buggy application jesus!
Would like to see the walkthrough and commentary
Thank you Jason. Here is the link for the walk-through th-cam.com/video/YzAxl1DHciQ/w-d-xo.html
@@KeithBarker got it on my watch list =)
sorry I mean subscriber, by the way , what about telephony ?
I don't know too much about telephony options in PT. Not sure what support it has for that.
GuestWiFi on managment interface?
Thank you Tamás Péter! PT has some limitations, including trunking not working between the WLC and the switch. Good eye.
@@KeithBarker You fixed it in the walk-trough video. I'm big fan of You!
I couldn't connect the employee device
Thank you Bo Villalobos. Appreciate you working on the lab. Here is the walk-through of the solution th-cam.com/video/YzAxl1DHciQ/w-d-xo.html
*I mean vWLC
Got it. :)