Wire And Configure An Encoder To An Allen Bradley Micro850 PLC
ฝัง
- เผยแพร่เมื่อ 1 มิ.ย. 2024
- In this lesson we wire our encoder to our Allen Bradley Micro850 then configure the high speed counter in Connected Components Workbench. The HSC high speed counter can be configured in ladder logic, function blocks, and structured text. In this lesson we show you how to configure it in both function blocks and structured text.
Get the full details of this lesson at twcontrols.com/micro800-conne...
Items used in this video:
PLC Trainer twcontrols.com/plc-trainers
Stepper Trainer controls.tw/steppertrainer
The above links make these videos possible. Please use them!
Support these videos while you advance your skills courses.twcontrols.com/ - วิทยาศาสตร์และเทคโนโลยี
![[TH] 2024 PMSL SEA GF D1 | Summer | แข่งที่ไทย ต้องใส่ให้สุด](http://i.ytimg.com/vi/Jkuf7nCS7jI/mqdefault.jpg)
Can you please show how to store a variables value to an array and retrieve them other way around in CCW.
I don't think I have done one specifically for CCW but it is the same as Studio 5000, here are some videos to help.
th-cam.com/video/Rl9nT029Zsc/w-d-xo.html
th-cam.com/video/6uuWHXoKjFE/w-d-xo.html
th-cam.com/video/qDIdvvGIgE4/w-d-xo.html
@Tim Ho to change encoder Input points on PLC
How do you do this on a Micro 820 with HSC plugin. It doesnt have the HSC block it only has the HSCE
If I recall it is nearly the same, seems you select a different channel number...it has been a while since I did one with a Micro820.
Sir for another sme (2nd ) encoder what we need to set changes...?
I will use input 2&3.
Great Vid!....Question....?...Are you able to make a video on setting up security, ie....passwords for PB and screens?...
Familiar with FT View security, but scratching my head trying to setup on Micro 800 HMIs.....THX!
Hi Henry, yes, it is on the list for the next set of Panelview videos.
Hi Tim, Could you do a video of how to create buttons on the Panelview 800 HMI to control the PT on a TON in the Micro 820? I'm so confused.
Here you go Stephen. th-cam.com/video/7TwFu2VQWkM/w-d-xo.html
@@TimWilborne Thank you so much. You are my hero.
How HSC is assigned for 2 nd encoder? How Hsc1 and 2 both set up with 0-1and 2-3 input ?
No, check the manual but I believe it is 4 and 5.
@@TimWilborne thank you sir for responding. But in accumulator valve is not changing...any imp. Parameter need to change in HSC instructions ...? I m using 850 plc.
Hello Tim good video, but you not listen my request to draw logic ckt with encoder plug-in module on 850 qwb plc model with hmi design
Still my request is in your pending list.
I'm not a wishing well, the schematic would be the same.
@@TimWilborne no friend schematics isn't same in case of hsc plug in module
@@svojasakdant2180 Then it sounds like you've already found the schematic.
@@TimWilborne yes friend with the help of other friend but still it bounced