How to Fix Bic White Out Correction Tape
ฝัง
- เผยแพร่เมื่อ 8 เม.ย. 2017
- Picture of Inside Bic White Out Tape
photos.app.goo.gl/FiiWGQ9ngNB...
as you can see in the picture, the new tape goes underneath the guide. the old (clear) tape goes on top of the guide. The new tape is on top above the red reel. The used clear tape is being wound around the red reel on the bottom.
Step 1 - Use a blade to pry open tape housing
Step 2- Pry out the bottom red or blue tape reel with the used up tape on it. The brand new tape sitting on top will come up with it. Take off the red or white tape guide piece as well and set aside.
Step 3- Now that you have both tape reels removed from the housing, wind the tape back onto each reel one at a time keeping the tape straight. Use a small piece of clear scotch tape to keep the white out tape on the first reel while you do the other one.
Step 4- Now that you have both tape reels wound up tightly carefully remove the clear tape holding the white out tape in place and put the bottom reel into the housing first and then the top reel with the new white out tape on it.
Step 5- This will be the most difficult part. You have to install the red or white tape guide piece with the tape going around it in the correct way. Use the picture links above to figure out how the tape is supposed to go. It's okay if you have excess tape coming out of the front of the guide. We will tighten everything up in the next step. Just make sure everything is facing the right direction like the new white out tape is facing down so that it can do its job.
Step 6- Once you have the tape in the right position going over the guide piece in order to tighten it all up you are going to push down onto the red or blue bottom reel to keep it from moving while also pushing down and turning at the same time the top reel of brand new white out tape. You are turning the brand new tape reel in order to bring the excess onto the reel so that everything will be good and tight again. Don't worry about wasting a small bit of new white out tape. You should have plenty left over even if you don't use a few inches.
Step 7- Everything should be nice and tight and facing the right direction. Now just snap the top lid of the housing back on and try using the White Out Tape on a piece of paper to see if you repaired it correctly. It make take a few tries to get all the parts moving smoothly again. I think mine took about 5 tries.
Well that's how you repair a Bic White Out Tape should the tape ever start coming out of the front guide incorrectly and it's not possible to push it back in.
#whiteouttape #correctiontape - แนวปฏิบัติและการใช้ชีวิต
![How to FIX a BROKEN [BIC] White-Out EZ correction Tape 👀 FAST & EASY FIX👍](/img/n.gif)
What happened to the close up photo of the tape, you said you were going to add to the comments?
The photo link is in the description
Thanks so much for the video, I got mine fixed thanks to you. Took about 45 minutes, so frustrating, but I was determined not to throw it away and buy another! Came close a couple of times!
@@lindagottleber2570 Good for you. Way to stick with it. Glad I could help.
What link description?
@@YM-zz5qq photos.google.com/share/AF1QipOKit8AE4edUVjSKmiMZZ1nE8RdUCa4hh-yHPZIXl2GE0iEIFYzCX5P82r-a5XtHg?key=QmFBUjVkQ044OHlMOEF1aWxackhSQmF1NWk5cnd3
I compliment you on your infinite patience. A few weeks ago I tried doing this myself, got confused, angry, frustrated, drove me nutts. Ended up just buying another one.
kudos for trying. i wanted to throw mine across my office. lol... I GIVE UP :)
I watched about three videos and I got so frustrated, I threw the whiteout aside. Now after about 2 months, I decided to go at it again and thanks to you my whiteout is as good as new!
Perseverance paid off!
I thought I was the only one bent on fixing it!!!
Many thanks! It helped me every step of the way!
Great job!!!!
Way to go man! You just made it so that I didn't have to go out and buy a new one in the middle of the night. Thanks!
Just fixed mine thanks to your photo! It has a problem where the wheels won't turn, and I found out that I have to hold it where the logo is. Thanks for sharing this video!
I'm glad it helped. That's interesting that holding it in certain places causes it to work or not
Excellent video on fixing the Bic Whiteout. It was exactly what I was looking for. Also the link leading to a photo showing exactly where each part of the tape is supposed to go was most helpful. Thank you!
My question is not for you. You are the man with infinite patience. My question is for all the companies that make this product. DIDNT THEY TEST IT AND SEE THAT IT DOESNT WORK? I am really embarrassed that I actually bought it more than ONCE! I am the dummy. But an optimist, so I guess thats whyI will buy a shitty product again, hoping they improved it.
I’m going to be honest after watching him roll the white out on the two rolls I stopped watching and figured it out on my own. It’s very easy once you figure it out. I did watch over again and I did it different than he did. I got it working again that’s all that counts. Thanks for the video it was very helpful.
Hahaha, my husband was trying to fix one of this and he can’t do that. I told him go to the TH-cam and he told me I didn’t think there is a video about how to fix a whiteout. And wow!!! I am surprised that I found a video about it. TH-cam has everything that you can imagine.
years later and it has been SO helpful, thank you!
Whoever thought of making Bic whiteout should take a permanent vacation and be sued...🤣🤣🤣🤣🤣🤣
You're a better man than I, Gunga Din. My old one has now been flung into the wastebasket. Thank Vishnu I had just purchased a new one.
Thanks for linking a picture in the info section! That helped a lot, and I was finally able to fix mine after 2 weeks of trying on my own.
Thanks Marshal…..you can learn something new everyday. My Dad cut the tape with a scissor and I was trying to figure out how to fix it and along came your video. Thanks again!
Ugh thank you. I've literally never been able to fix my white out until now. The video was a little blurry you were clear enough that I got it and could follow along.
While my frustration was heightening while doing this fix. The process was quite smooth, thanks to your video. Thank you kindly!
Great job, Marshall. Thank you for taking the time to record the fix.
OH MY GOD, HE SPEAKS!!! First one of these I've seen that the person actually TALKS!
I know, right
You are a hero. This would be impossible without this guidance. The photo you posted really helped too.
I should admit at first It’s seemed to be wasting of time but actually you really helped a lot with your video and I fixed my tape thanks to you! I appreciate your help and thank you 😊🙏🏼. Wish you luck with everything.
Glad i was able to help you fix your tape
The time it takes to study how this thing goes back to working order makes this product unworthy of purchase. Thanks for putting up your video anyway.
It’s 1:37pm and I’m supposed to be studying but this is where my ADHD has led me… 😅😂 thank you for helping me fix my whiteout tape that I randomly decided to pull apart
I'm the same way. There's always time to fix something
I really believe it would be a lot easier to just buy another one next time you go to the store. Plain and simple 👍🏻👍🏻
Better yet, save yourself a trip and have one delivered to your door by Amazon. I put a link in the description
Mine was AFU right out of the package. Back to the store... will buy a different brand. Bic needs to address this!
I couldn't get mine fixed but thanks for posting. Frustrated this thing tangles so easy. When it works it's amazing. When it doesn't 😤
I just threw it in the garbage. Why can't the engineers just put a wind up thingy?
Mine is now in the trash, where it belongs.
Video was good although could easily be condensed. The close up pictures were what I really needed. Thanks for making the video (and taking pictures).
Your thumb nail was good enough for me thanks!!
Thank you for your video! It helped me so much. My little niece messed mine up and didnt let me know......
This is awesome !! You can’t find a how to for literally anything 😂😂😂🍿🍿
You are a very patient man. Good job!
You never know what kind of useful things you'll find on youtube...
Thank you so much.
You are a very patient man. 🙏
Thanks for your help - awesome shirt, too!!!
great video! really lets you see the patience required to fix this buck in a half item. only wish there was a close up on how the tape goes in the tip.
Didn’t they used to make them with little winding things on the top!?
Took a look at it for a sec, threw it in the trash, picked a new one.
wisdom prevails. not worth the time to deal with such a product unless you have nothing else to do.
Thanks, you convinced me to just go buy a new one
Thank you Marshall!
Thanks for the instructions
Thanks for posting the video!
My White Out tape wasn't twisted it was just pulled out too far but believe me I still cursed 🤬at the dang thing but what helped my sailor mouth was a nail file. I gently pried it open along the edges and which I also used the file to guide the oh so gentle tape around the tape guiders since tips of fingers just fumbles everything up and this way went smooth as butter. Id like to also suggest holding the top reel with fingers while using an eraser tip of a pencil to rotate the bottom reel.
Nicked my finger while trying to pry it open. Now, I have blood on my laptop. I guess some things are better left unfixed.
Hey man! Thanks for the tape, you save my life!
Glad I could help!
Your life?
The photo helped. Thanks for sharing.
Thank you! From Russia with love!
I wont be buying anymore of these. 4 of them did this. There is definately a flaw design that Bic needs to address and fix. I e-mailed them & let them know. If everyone started e-mailing them they would be forced to address this.
I agree. This thing is just ridiculous. I'm also going to be emailing them about this subpar tool.
“When you’re done it should look like this.” I can’t see it from here lol .Please show the contraption up close?
photos.google.com/share/AF1QipOKit8AE4edUVjSKmiMZZ1nE8RdUCa4hh-yHPZIXl2GE0iEIFYzCX5P82r-a5XtHg?key=QmFBUjVkQ044OHlMOEF1aWxackhSQmF1NWk5cnd3
I'm pretty sure I saw you on Shameless. Kevin Ball, right?
thanks for doing this video for us!!!!!
Omg help i couldnt understand ur steps can u plz explain it simpler this is my only white out and it wont come out
Stabilizing both wheels with fingers is essential. That's what I gleaned from watching your struggles, and I managed to reload mine pretty quickly. But the thing still doesn't work right because the take-up waste wheel isn't turning, just the top supply wheel. So the tape just loops out. There must be some mechanism between the wheels that locks them together so take-up and feed are equal, but they aren't locked or I wouldn't have been able to turn each separately to remove slack during the repair. Any advice as to how the large take-up wheel is supposed to turn would be appreciated.
It's been a long time since I made that video and I've only done one additional fix on the tape since then so I'm going with an educated guess here and I could be totally wrong but I think the take up the slack wheel turns at the same time as the dispenser wheel because it's sitting on top of it. The two are pressed together.
@@MarshallBLewis I finally took the wheels apart. They aren’t pressed together, but the top one has 3 plastic prongs that fit in a slot in the lower wheel, to provide tension between the wheels. It’s not enough; the waste wheel can slip and not turn. Especially if the straight guide post gets tacky from tape that didn’t go onto paper and that “contaminates” the device inside. That post is meant to guide slick, whiteout-free empty tape. Between drag at the post and the iffy wheel tension prongs, I couldn’t even get whiteout to strip off the tip. I finally tossed it. My old PaperMate brand has never given me any trouble.
@@hafcanadiana318Gotcha. Sometimes it's worth tossing something cheap than spending lots of time trying to fix it so it sounds like you made a good choice
I just threw mine out after 20 mins of trying to fix it, Never Again will I buy this lemon 20 mins of my life wasted and lots of cursing
This has never worked, seems good in theory, but mechanically not feasible. I'll stick with the brush.
Thnx u helped me alot
Annoying twisted roller☹
Yea....mine ended up in the garbage can. You are more of a man than I am bro, I didn't have the patience etc.
Best idea is to buy white out fluid, these tape reels are total bulls**t--I bought a two pack and neither worked. After 45 minutes of jacking with wheels and white sticky tape I figured my sanity and time are with more than the $5. Who the hell is in charge of QC at Bic.....
Agreed. It's a crap product not worth the money and definitely not the time to fix it if at all successful to do so. Just toss it and go white out fluid.
A dumbass...😂😂😂😂
Con tan solo ver la imagen de fondo lo arregle es lo q necesitaba para solucionarla esq no sabia como ivan las guias
If I use white out will I disappear?
Thank you! I did it!
Me fue super útil, mil gracias. 👍🏻
Thank you
Thank you so much!!
Thank you 👍🏻
When you clicked on this video only to see the He is greater than i shirt XD
So, does the takeup tape (clear) go UNDER the little guide thing at the edge, and the white out tape goes through the guide? You may want to film this again, and mount the camera OVER the white out unit. It’s too far away to tell exactly what’s going on!
Here's a picture I just took myself to show exactly what you need photos.app.goo.gl/FiiWGQ9ngNBngifv6
as you can see in the picture, the new tape goes underneath the guide. the old (clear) tape goes on top of the guide. The new tape is on top above the red reel. The used clear tape is being wound around the red reel on the bottom.
Thank you so much!!!! 😊🤙🏻
I have a broken correction tape holder that I want to fix and take some close up with my phone camera. Dilemma: how can I see if I'm pointing in the right direction if the camera is aimed down at my counter? Maybe I can livestream it 🤔 i guess I could just reverse the camera, duh 🤓
Thanks man!
OMGosh! Thank you sooo much!
I was very delicate with mine by smashing it to pieces then buying white out liquid
Thanks!
Bottle of white out dried out so fast that I thought this would be better. WRONG! I don't have the patience for that but was satisfied to leave a bad review on Amazon at least.
You are nice person. Thank you very much！
Muchas gracias gringuito no te entendi de madres pero arreglé el corrector gracias a ti❤
thanks i tried. I have a noname white out dispenser from staples. i tried taping the rip together with sticky tape. it unravelled and went downhill from there. the tip piece also bounced off my table and have yet to find it. but listening to this was relaxing. you should do asmr videos :D
this helped so much! finally figured it out, thanks!
Best bet is BUY ANOTHER ONE
Obrigadoooo vc foi o único q tem um corretivo como o meu bgd😷
¡Gracias!
Thank u !!!
Love your tshirt ❤
Guys just ask your teacher problem solved lol
It’s hard to see what you’re doing and you don’t explain which side out how to connect the reels.
Back to the bottle!
well the video did,'t help, but right when u said which goes on the bottom and which goes on the top, i understood what i did wrong. i put whats supposed to be on top on the bottom and whats supposed to be on the bottom on the top. thanks!!
nah wait im raged now it didnt work for some reason the tape just starts going crazy and pops back out im so mad
thanks for trying to help anyway
Thanks alot
Saludos me sirvió de mucho lo hice en 5min.
Can they just toss it off the self
Returning to store screw that thing tried for 30 minutes out of package like that
Don't know why mine failed after working for 6 months. Tried to fix but after 20 minutes gave it up and bought a new one. The new one was bad to the bone right out of the package. With this video i have a chance to fix it. Thanks Marshall would be more helpful if you shot a few top views. Shame on Bic. I'm going to look for liquid Wite Out, not as good but not fragile.
Mine didn't cut the tape and i broke mine😞
THANK YOOUU
next time put the camera a little closer but anyways thnx
Love u so much king
Its not helpful at all if you dont move your hands so we can actually see what its supposed to look like