I has a 2001 corolla and it was a great car. Its still one of my favorite body styles for the corolla. I hated the Gen that came right after is just didn’t look as slick as this open did. With the right body kits this corolla looked munch nicer than even the Honda civics of its time.
Hey i was wondering where you got the front and rear bumpers on the car towards the start of the vid the ones at 1:10. You really put in work for this car and it shows
So just for clarification, when you custom fabricated the front bumper, you cut the lower portion of the 8th gen bumper off and then replaced it with the lower bumper of a 9th gen corolla and then plastic welded it correct? You didn't just buy the two valence pieces on either side? I'm planning on doing this soon to my own corolla.
Gran trabajo 👌🏻👏 yo tengo mi proyecto de mi Corolla 2000 estoy viendo muchos videos para poder hacer desde la pintura hasta los estribos pero... Solo se que me costará, si llegas a leer mi comentario me ayudaría a decirme cómo se desmontan las puertas y el baul ya que no se cómo quitarle los cables.
I know these corollas burn a lot of oil, considering they have the notorious 1zz. How was your experience with these cars? I heard they were easy fixes, and I was hoping to buy one of these bad boys soon after letting go of a Celica GT (pre-facelift).
It wasn’t as bad on the oil burning until it hit 200k. Between 200k and 300k I had to put a quart of oil at every gas station fill up. You get used to it tho as I managed to get my Corolla to 300k miles. Finally started to lightly knock so I retired It to the state and got $1500 for it.
@@2zzlow Thanks for the input. Love your videos. You’re such an inspiration for small content creators and even aspiring mechanics who want to do DIY projects at home. Keep up the good work, cbass.
I had 2001 Corolla LE. Bought in 2011 used. Had to let it go after in 2015 as it couldn't pass emissions test. Mine burned a lot of oil. Started getting very rusty too. But it was a great car. During the time 2011 - 2015 the car didn't let me down once. I had to put a lot of oil because of oil burning but the car still kept on running and running. it was running even though it didn't pass emissions test but that meant I couldn't cross the boarder so I had no choice to send it to a junkyard. After that I had bought a 2007 Toyota Camry LE with a 2AZ-FE engine. That engine also considered to be easy to work on. It also burns oil but only a little bit even though its at 325,000 KM. Really love these cars.
So u got a 9th gen front and rear corolla bumper add ons....was it a direct fit? What did u had to do exactly to get it to fit?? Also what did u lower it on and how was the ride?? Very nice btw
Not a direct fit. A lot of cutting and plastic welding had to take place. The fronts I cut material off of them and the rears I had to add material to them. They do keep the original curved to them. My car was lowered on TRD springs by eibach with tokico blue shocks. Very nice handling...
Disculpa estoi mudificsndo el mio siguiendo tus pasos ya tebgo losnlaterales y losde atras corolla 2007 pero no logro entender como colocar los de enfrente nome cuadran son solo las vistas o unistevla defensa comoleta del 2007 al 2001
Damn bro so sick I am going to be building a 00 Corolla and maybe 01 Corolla S this vid just give me some ideas of what I could do thanks and sick car bro
@@2zzlow yea man I was looking at your vid and I was like oh man i never thought of doing that so yea i am all happy and getting ready to start my build
Front is a half cut top 01-02 oem bumper with a half cut bottom of a 05-08 oem bumper both from Corolla S plastic welded together. Rear bumper is a modified 98-02 Corolla “Bomber” bumper which is a replica to the bomex
![[UNCUT] บอสพอล แผลงฤทธิ์ บอสพระ-นักร้อง ก. โดนแฉยับ! I คนดังนั่งเคลียร์ I 21 ต.ค. 67](http://i.ytimg.com/vi/XKf6HeftoPI/mqdefault.jpg)
I know this is 4 years (or whenever ur reading this) old, but this is one of the most “simple” clean Corolla builds I’ve seen.
that was my plan all along. I much prefer the final phase it went as it got most of the attention from the half cut bumper.
I has a 2001 corolla and it was a great car. Its still one of my favorite body styles for the corolla. I hated the Gen that came right after is just didn’t look as slick as this open did. With the right body kits this corolla looked munch nicer than even the Honda civics of its time.
i love this gen but the xrs is a better car
That looks very beautiful I eventually want make mine car like yours thanks for the slideshow my car Toyota Corolla is 2001 year
No problem man, loved the way the car turned out but I owned that car for over 7 years and had to move on to a manual one.
Hey, I know this video is quite old now, but if you see this would you tell me where you got your valve cover !?! (:
Nice!!! Respect for these cars. Built to last forever!
Exactly, thanks for watching the videos...
Looks good. I like it because its not over done...doesnt scream riced out
thanks fam!
Excelente 😍😍😍😍 tengo trabajo que hacer con mi Corolla ♥️
Gracias primo!
@@2zzlow amigo y como los uniste?
Hey i was wondering where you got the front and rear bumpers on the car towards the start of the vid the ones at 1:10. You really put in work for this car and it shows
ebay bomber body kit. bomex replica
never have seen a 9th gen front bumper on an 8th gen. very unique.
So just for clarification, when you custom fabricated the front bumper, you cut the lower portion of the 8th gen bumper off and then replaced it with the lower bumper of a 9th gen corolla and then plastic welded it correct? You didn't just buy the two valence pieces on either side? I'm planning on doing this soon to my own corolla.
2 bumpers fused together
Gran trabajo 👌🏻👏 yo tengo mi proyecto de mi Corolla 2000 estoy viendo muchos videos para poder hacer desde la pintura hasta los estribos pero... Solo se que me costará, si llegas a leer mi comentario me ayudaría a decirme cómo se desmontan las puertas y el baul ya que no se cómo quitarle los cables.
Did you measure and cut off the front bumper to replace the flip or how did u do it
Wow.. that can out surprisingly well
Somewhat lol 😂
Looks good. Where did you get the rear window spoiler? Ive tried but can't find anything like it. All I've found is lower junkier looking ones.
Try eBay, that’s where I bought it...
I know these corollas burn a lot of oil, considering they have the notorious 1zz. How was your experience with these cars? I heard they were easy fixes, and I was hoping to buy one of these bad boys soon after letting go of a Celica GT (pre-facelift).
It wasn’t as bad on the oil burning until it hit 200k. Between 200k and 300k I had to put a quart of oil at every gas station fill up. You get used to it tho as I managed to get my Corolla to 300k miles. Finally started to lightly knock so I retired It to the state and got $1500 for it.
@@2zzlow Thanks for the input. Love your videos. You’re such an inspiration for small content creators and even aspiring mechanics who want to do DIY projects at home. Keep up the good work, cbass.
I had 2001 Corolla LE. Bought in 2011 used. Had to let it go after in 2015 as it couldn't pass emissions test. Mine burned a lot of oil. Started getting very rusty too. But it was a great car. During the time 2011 - 2015 the car didn't let me down once. I had to put a lot of oil because of oil burning but the car still kept on running and running. it was running even though it didn't pass emissions test but that meant I couldn't cross the boarder so I had no choice to send it to a junkyard. After that I had bought a 2007 Toyota Camry LE with a 2AZ-FE engine. That engine also considered to be easy to work on. It also burns oil but only a little bit even though its at 325,000 KM. Really love these cars.
I heard the KIA cara burn mucho oíl, not Toyota
So u got a 9th gen front and rear corolla bumper add ons....was it a direct fit? What did u had to do exactly to get it to fit?? Also what did u lower it on and how was the ride?? Very nice btw
Not a direct fit. A lot of cutting and plastic welding had to take place. The fronts I cut material off of them and the rears I had to add material to them. They do keep the original curved to them. My car was lowered on TRD springs by eibach with tokico blue shocks. Very nice handling...
Hermoso, just beautiful
Thank you very much!
I know im pretty late but can you drop me all the things you used i wanna make mine look like this!
all the things? please be specific as to what
2zzlow body kit name
2zzlow where did you get the front lip at bro?? i been looking everywhere but no one seems to sell them
@Cristian everything was custom made to fit from a 2005-08 Corolla S
May I ask where you got the front and rear bumper etc from ????
custom made
DAmm bro never ever would I believe a Corolla 01 would look clean af I git one 2
thanks fam
Disculpa estoi mudificsndo el mio siguiendo tus pasos ya tebgo losnlaterales y losde atras corolla 2007 pero no logro entender como colocar los de enfrente nome cuadran son solo las vistas o unistevla defensa comoleta del 2007 al 2001
Nice build
Thanks
Also how did you get side skits and replacement new bumpers from front and back?
eBay, everything was purchased from eBay and I modified it to fit better.
2zzlow can you link it? So i can find it
You still have the Corolla? I’m looking for parts 👀 Hmu if you still have it !!!
no i dont sorry
How much would you charge for this body work but from 03-04 to fit a 2001-02
too much work for sell
Where did you get the Corolla S interior parts i been looking for one for me???
from a close friend and the junk yard.
2zzlow Thanks
Damn bro so sick I am going to be building a 00 Corolla and maybe 01 Corolla S this vid just give me some ideas of what I could do thanks and sick car bro
Awesome, that was the point of me making this video and im glad you found it useful.
@@2zzlow yea man I was looking at your vid and I was like oh man i never thought of doing that so yea i am all happy and getting ready to start my build
What's the name of the front and back bumper? at 4:09
Front is a half cut top 01-02 oem bumper with a half cut bottom of a 05-08 oem bumper both from Corolla S plastic welded together.
Rear bumper is a modified 98-02 Corolla “Bomber” bumper which is a replica to the bomex
Do you know how to fix engine starter on the corolla
replace
nice work
Thanks!
Honestly insurance companies will declare yourself total to hail hits it or if there's just a freaking crack in the windshield.
True true, its crazy how little they charge for the car even after they cash you out.
You put a lot of work on that one
Yes I did, I miss it a lot
I was wondering where did you get the spoiler from i would like to find one for my corolla
I actually made a mold out of the TRD spoiler and made a fiberglass replica then molded it onto my trunk.
Clean
thanks!
Por que no haces esos bumbers para venderlos? Yo te lo compro si lo hicieras y se que muchos toyoteros igual.
mucho tiempo para construir
How did you remote all the bumpers and stuff? Can you make a video of possible?
You can find a couple of tutorials online but it’s honestly very simple.
How did you modify rotor to fit rear
I had to use a drill press to make the 5x100 rotor into 4x100
I have a 2001 Toyota Corolla car, but looks different 🤔
The complete name is " NEW Corolla" ( 2001) nafta engine 1,5
where u get the interior
from a friend
how much did all this cost you?
It wasn’t how much it all cost, it was how much time I dedicated to it.
@@2zzlow damn bro bet it was worth it right
do you still have this car?
no junked it sadly
@@2zzlow y😡
I wouldn’t trade my 2001 Corolla for the whole lot of new cars (unless if only to sell them for money) and buy another 2001 corolla.
i regret getting rid of my first car but it was a solid champ for 300k miles
What's the name of the first song
eternus by saxion7
@@2zzlow thanks
Nice, love it
You a place to fix car frame?, tx.
Thanks, Im just a passionate car owner. No body shop
How did you modify the intake? I have one and its ready to go in my 02 corolla but it doesn't seem to fit.
you need to cut the hole bigger where it goes down under. where the stock tubing goes through. its not a 100% fit
2zzlow yeah I did that but now the intake isn't clearing the battery
Needs more LOW
cars gone sadly
Omg...
Lol wtf
What’s up?
2zzlow do uk if the auto S model and the manual S model use to same axle?
2zzlow and I wondered wat have to the manual 90s corolla
yes they do....My friend gave me a manual axle and i used it on my auto.
2zzlow got it str8 ty thoe bro