$900 Predator 212cc Rebuild & Dyno ~ Subscriber Engine Part 2
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- On last video we go an engine from a subscriber that he couldn't get run. He spent $900 on the build of his Predator Hemi 212cc engine. We ended up rebuilding his engine because we found metal in the block. On this episode we rebuild, ride, and dyno it. Lets see what it makes!!!
Parts Used On This Build -
Predator 212cc Hemi - bit.ly/2VBPOjW
Billet Flywheel - www.eccarburet...
Billet Side Cover -
Billet Side Cover O Ring - amzn.to/46vyn7g
Billet Rod & Wisco Piston - amzn.to/47PX9A1
26LBS Valve Springs - amzn.to/3GhfNF7
Chromoly Pushrods -
1.2 Ratio Rockers -
Super X Cam -
Predator Carb Jet Kit - bit.ly/47uusca
MSD Coil Pack - bit.ly/3wn8uX2
Valve Cover Spacer - amzn.to/3GcPIHv
Stainless Valves -
Billet retainers -
Merch & Events - bit.ly/33YbmtO
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Machinery- Siegmund Welding Table - bit.ly/36PHm6G
- Nargesa CC60 Bender - bit.ly/2xWDVxj
Prime Weld Tig 225x - amzn.to/3L4U3MG
Prime Weld MIG180- amzn.to/3KVUPvn
Amsoil Affiliate - bit.ly/3TWtrmM
Benchmark Abrasives (cut-off wheels, flap discs..) bit.ly/2SENg4f save 10% REDBEARD10
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Facebook - redbeardsgarage
Instagram - redbeardsgarage
TikTok - redbeardsgarage0
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #RedBeardsGarage
Again, thank you so much man. I can’t wait to get it back and take it for a spin. This is only the beginning ima always cherish this moment - Jose 🏁🔥🙏
Nice lil build Jose! But like Greg said port that head bro an do a slide carb upgrade! I think a 26mm flatslide nibbi would do that build wonders🤘🏽😎
@@Minibike-Isaacyeah ima have to look into that Forsure bro
Pretty awesome to see your engine here and is a great learning experience for everybody. Good job for your first build. For sure upgrade your carburetor and it will up the horsepower.
Hey, forgot to ask if you used the longer rod than factory, if so which did you get TIA
I used chromoly NR racing 5.260 push rods and they seem a bit shorter then the stock once but idk just my opinion
That was nice of you to help him out by giving him that block in 36 lb Springs!👍
It's so nice to see someone helping young people get interested in building and working on engines. Back in the early 1970's, I learned from Mike Demarist and Bill Schultz. They built Drag Racing engines for some of the top Drag Racers back in the day but they were never too busy that they couldn't help a young guy learn the ropes. It is a learning process and I built 5 cars until I had got to the point where I had a fast car. I then went on to spend a career in the Automotive industry as a Mechanic. It was a good career. Thank you again for helping Jose. And to Jose I say, keep at it.
Very generous of you he is lucky you helped
Thank you sir. He should have a good runner.
What a great thing to do for Jose. He'll never forget it and this will be his first step to becoming a great small engine builder!
Yeah a moment im always going to cherish that’s Forsure just gotta keep pushing further sir -Jose
That hot glue on the valve lapping tool is a good idea
"inflating their dyno numbers"
100% a jab at GPS.
So glad he has finally wised up and gotten away from them. Now hopefully EC does better.
You the GOAT because nobody else with your reach and a channel of your size would be willing to help out one of the subs with a project build. I could be wrong but if everyone starts doing this you set the blueprint
Yup,ur a good man for helping out the way you did on his motor,these days there aren't many like you around,God bless u and everyone.
It's a hard lesson to learn,and I am sure he will learn a lot from watching your video ,he won't make this mistake again and that's the best way to learn ,best wishes to all
You are a good man to help out a viewer so well. At the same time I’m glad to see all your skill and direction in fine tuning small engines. Your experience is beyond helpful! Glad for your channel.
Good for you both! Being able to offer up your build to diagnose and fix, and to RBG to help us all as we learn. Good run, enjoy the motor!
Love it! Thank you for helping a brother out. It gives me hope to see good people doing good things. I just got a $50 Baja Warrior in fantastic condition. I cannot believe the difference with just a vm24, exhaust, and CVT. Pulls wheelies and tops out @ 48.7mph!
fist engine i did at 14 i put my pston in backwards /1986 it200 yamaha 2 stroke .need less to say brand new wisco piston with bent piston ring stuck in sideways piston i clean up damaged piston with gouged smoothed over as not to scratch up my new bore that got nicked up in my failed rebuild so i installed new rings and it ran great for a long time .crap was stupid expensive back in 1995 think that piston was 69.00 then so in now prices be around 175 or so
I do not own a mini bike, but the information shared and explained in this channel is excellent. Kudos for not turning into a gatekeeper.
Found a race go kart in the metal bin at my job. Missing a wheel. Needs engine. I have no clue what to do. Lol. This is now my new favorite channel.
Salute RBG...you should do more of these videos
I will be on the look out for more people to help this was fun!
Great learning experience for all of us.
Bravo Mr RB! My 1st video... Great info and build. I'm sure this will all come back to you tenfold. Thanks for spreading the good word. All the best! Jeff
Even though you were riding on grass, not asphalt, or gravel, it sends shivers up my spine, to see bare legs and hands. The first few times I rode my 212 Predator, non hemi mountain bike, I had trouble keeping the front wheel on the ground, when I accelerated away, in traffic. Once, when waiting for a traffic light, My pants caught the long throttle lever, sticking out from the carb, and, over she went. It was more embarrassing, when the same thing happened after I picked the bike up, and remounted it. After cutting off the excess throttle lever, and some head scratching, I figured out the fast rebound setting on my front forks was causing the front end to jump up when accelerating, so I switched it to slow rebound, and the front wheel began to behave itself. I know a 212 Predator is not really legal, In Canada, with no license, plates, or insurance, but, it looks like a Monster 90 engine, only more fun. I try to keep it under 100 km/h so as not to attract too much attention, but, being partly blind, and mostly deaf, with no sense of balance, and 70 years old, it's my only transportation. Why don't you DIY guys build a motorized mtb? They are a blast, and much more road worthy. I did stretch the frame to fit the 212, but the Monster 90 engine fits with no mods. Go Power Sports were nice enough to GIVE me a Juggernaut clutch, when they first came out with it, and it is a game changer. COMPLETELY maintenance-free, smooth, and delivers power, when it's needed. It is definitely a Swiss watch among clutches. I'd really like to see you put together a motorized mtb, to see what you come up with. PS, I was a little concerned, when I saw the stock flywheel you pulled off that engine, but, then I saw you replace it with a billet alum one, good call. that stock flywheel won't keep it's magnet, at that RPM, and they become a bullet, at 6,000rpm. Nice work.
A great and wonderful gesture. Further proof to resist the urge to order stuff that one thinks will gain a ton of power. Been there done that.
2 Kings 9: 20
Great video and love how genuine of a person you are and since your first videos till now you haven't changed at all. Still remember when i messaged you a pic of my first build and you actually responded and complimented it. ❤
Great job as usual! Would have been cool to try a vm22 on the engine while it was on the dyno just to show the difference on the mild build. I'm sure it would have made some difference to show Jose. Thanks for sharing!!!
Well, you’re a very nice guy for doing a favor for free I like people like you
Really kind of you to help him out . Enjoyed this series
Live and learn! Hopefully this helps others too.
I think it's great what you did for Jose I did watch one and two nice job. The world needs more people like you.
God bless you.
This small series you did was amazing, would love to see more like it. Thank you for doing what you do, you have taught me a lot.
This should be a learning lesson for all backyard kart builders. I followed the road to hp videos and built my 212 and got great results for way less money. Greg made a great point. When starting your build, trash the stock card and go for the slide carb. Don't waste your money trying to improve the stock carb. I tried and it is a waste of time. Great learning video on how to spend your money wisely.
You totally should make a video on how to port a head. Your one of the few TH-cam’s i trust to show me how to port my head properly.
More good info on engine building.
Super kind man to help this person. You will be blessed 100 fold
Looking forward to seeing some 25+hp engines dynoed
Go for it Jose!!!
It's really cool to see you help someone out with an issue like this. Keep the videos coming.
Great videos Red, thanks for sharing and bless you for helping Jose. That'll spark him to keep going with the sport and keep learning.
You might want to shim the springs that RB installed in the head since he cut the spring pockets for you. He has you in the safe zone at .060" and rightfully so, considering the build, but there is some HP, torque, and RPM that might be left on the table without shimming the springs to .030" of coil bind. Just a thought on your "Road to Horsepower" Good luck , Jose and thank you RB for another awesome video!
Thank you buddy -Jose 🙏
Right on RBG! Keep learning & going Jose, Now you gonna rock!
You are the man Greg!
Thank you sir
Thanks for the great content, and for helping out one of your fans.
Very valuable info at the end.
God bless him. This is how you learn. The knowledge he gained from his build and your help was worth what he had invested into that engine.
I really like both of these videos. You remained humble and offered awesome advice. We all make mistakes and that’s okay.
dang it red... you done called me out.. now i cant troll the guy... but seriously... im glad u did this vid and im glad he had this problem, your tear down was seriously helpful i ended up having a vacum leak on the varb as well when i put a chinese vm22 i bought on amazon on her and it made a world of a difference that i seen this and went strait to checking if thats what had happend to me... had to order the right gasket for the stock predator manifold...
Red beard you are a class act! Great info for the people. Im a side builder that knows all this stuff from building ATV motors. My personal was a honda 400 making 51 hp on the dyno. Keeps up the great videos and the proper information to the future builders!
Good man
Takes a real good man to do this
Respect is refreshing
best channel for minibikes
Your the real deal! Thanks for helping him. It takes more energy to lift someone up than to put someone down. Great video for people learn.
Can only gain experience through experience.
Very cool that you helped Jose so much.
This is one more reason I love Red beard garage❤❤❤❤
That takes me back to the early 80s riding our mini bikes.
That GPS : perfect
Was funny 🤣👊🏻
You can teach a man to fish. You have been way too kind. I hope Hose appreciates your kindness. It's great to see guys just sharing time because of their good Christian nature. You're a good dude. Two thumbs-up and thanks for the video, & another something I really need in my life 😅
While watching your video and listening to you speak, I was reminded of Proverbs 22:1
“A good name is to be chosen rather than great riches, loving favor rather than silver and gold.”
Both riches (silver and gold) and an honorable reputation (loving favor, i.e., respect) are good. But if one has to choose between them, Solomon says, “Choose a good name.”
You're such a nice guy. I hope you hit the mega million jackpot for your actions.
How far you've came red beard and family. Geez. I'm so proud of yall.
I really enjoyed this series
Thanks for info about that piston.
Awesome what you did for Jose. I laughed when you played the first run in high speed because it sounded like a nitro RC engine.
Good looking motor. 👌
Thank you brother - Jose 🙏
You are one of the best mini bike TH-camrs for helping one of your viewers. God bless you man .
God bless you to
You, the man, and pretty awesome helping out, and I enjoy your channel.
You are awesome dude I'm sure not only did you educate some of us but you did Jose a solid with that block swap Over and above the call of duty
Awesome, Jose should know how now 😊 ever think of a Gravybones minibike a larger scale mini be kool 😉☮️
Thank you bro 🙏
Thanks so much for making this content. Just got my first mini bike and will be using you videos for motor builds. You about to save me so much money I can already tell
YOU MUST SEE MANUFACTURING TUTUK FACTURY IN INDIA....... OMG. I WAS ALMOST HAD A HEART ATTACT. MUST SEE THIS.
I've been following you for a long time, Im so happy your doing good enough with this channel to do stuff like this. This was a really cool job you did for Jose. Your shop is looking incredible!
Hey brother I'm into 2 stroke Rc truck.. I really liked how you step up to help him..
I worked with a guy back in the late 90s! They raced carts and was telling me some of their refreshed engines was around $700 back then!!!
There you go Jose Greg has set you up for a great engine with plenty of mods you can throw at a solid base have fun matey enjoy all power to you and redbeard of course...john...Australia...😊😊
Like he said he could of got to where it’s the fastest but I’m actually glad he left me some work to do my self, only way we learn by being hands on - Jose
You're a good guy!!
I learned so much from this video. Thanks for boht helping Jose and myself out big time!
Great to hear!
Wow… that is shocking for only 10.81 hp.. I have a 212 HEMI and when it was brand new we put valve springs to rev 6k rpm and a Briggs 206 animal carb with a black slide, and a fuel pump powered by the vacuum from the engine block, and it reached a whopping 14 hp. It was 100 bux for the engine, and 2-300 for the other parts. And those other parts were even used too haha
It's way under-carburated. Needs a properly set up 22 or a sloppy 24.
Note that too big won't work, either; and matching the carb and ports, then properly tuning the carb, would get him smiling.
You are amazing; an impressively smooth engine. I like the tank mount on this bike and will probably use it on my next bike.
Awesome video
Thanks!
Jose take care of that engine buddy. Great series
I honestly wanna put it in a trophy case and only take it out in go kart meets or shows 😂 this a moment ima always cherish 🙏- Jose
A lot of good info in this short series. Simple mistakes a lot of people could make. Spend wisely.
I’m so glad I watched the road to hp. My 212cc ripps.
I built several "okay" engines before I built a winners circle engine . It's part of the learning curve . Jose is on his way to building great engines .
HEY! You stole my hot glue on the lapping stick trick!
This is the first time watching on of your videos but they are very well produced 👍
Also awesome job helping out this subscriber
My name is Dan & I’m a 63 year old kid! I’m about to start building these small engines & I like what ur selling & ur knowledge from what i have seen!! In my younger years i did small block building engines but theres alot of demand for small engines so let’s see what you can teach a old man!! Great job on the hemispheric engine!! Look forward for more!!
I have built several of these engines for my karts and buddies and I’m still learning I have found that instead of buying random parts or these all in one kits it’s better to order parts from a place that has been building engines awhile get in touch with them tell them what your budget is and what you want to achieve and they will tell you what you need.
Heck yeah! I have almost the same build, thing runs pretty good. I already have a big carb and i was thinking that porting is what I'm missing from making it run excellent.
thank you for the last 2 videos. new upgrades for my 420 for sure
Thank you brother !!!
I caught the last video and it was the first of your videos I had watched! I was impressed and subscribed and now watching the videos that follow! Looking forward to watching all your content! Let us not grow weary of doing good! “God bless” my brother! 🙏🤗❤️
Rbg for the win! Dude i love these build videos so much helpful informative content, and your overall Generosity thoughout this video Astonished me! Keep doing gods work, good sir, you and your family have the utmost respect from me.
I remember when I was around 15-16 and built a custom pitbike with one of those walmart baha bike frames. Bought that frame on craigslist for $40 and repainted it blue and got a predator 212 engine and put a stage 2 performance kit on it. That thing was so much fun and probably went 35-40mph and got great smiles per gallon puttering around my neighborhood.
love the content! keep up the amazing work
I like that old dent side out there.
Red Beard you are awesome! I can appreciate someone who wants to help someone with less experience so they can learn from their mistakes. Thank you for this video!
Just an awesome video! Great job!
I just got my first engine build done it all started with a Honda gx160 I had laying around hopefully it’s a beast when I get to run it
correction...God bless you!
Red beard, your videos are awesome man. Love your content so much!
941 you must live in palmetto or bradington fl? What a nice guy! He did probably close to $1000 dollars worth of work and the new parts. Look how many views he go just from helping out a subscriber. Might want to think about doing more videos like this. Just in the views might have paid for everything he did for you. I have some big motors if your interested and live close to st Pete fl keep up the great work and videos
Yeah brother im in palmetto Fl thank you for tuning in -Jose
Great advice lot of information . Keep the content coming very interested in your nitro conversation.