When exporting variables from Unity Pro to Vijeo Designer software, is it necessary for the programming laptop to be connected to both the PLC and the Magelis HMI, even if the PLC program is already present on the programming laptop?
If you are connecting plc TM200 series with laptop through ecostruxure software, then note following points- 1) In communication tab, remember to click or select usb port. Usb port option will be available only after you connect usb cable Between laptop and plc 2) re-connect plc cable and ensure usb port is selected.
Please continue❤
Thanks for your time to share this information!!!.
Its is posible to have hmi in one segment address and plc in another(with routing working)?
When exporting variables from Unity Pro to Vijeo Designer software, is it necessary for the programming laptop to be connected to both the PLC and the Magelis HMI, even if the PLC program is already present on the programming laptop?
Not necessary
Hello, i get error "failed to open connection to PLC". I have M200 and ET6400. Any idea how to resolve it?
If you are connecting plc TM200 series with laptop through ecostruxure software, then note following points-
1) In communication tab, remember to click or select usb port.
Usb port option will be available only after you connect usb cable Between laptop and plc
2) re-connect plc cable and ensure usb port is selected.
❤
Aap kya traning dete ho