BEST VIDEO OF ANNOYING KNOCKING NOISE,NISSAN TITAN
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2015
- I created this video with the TH-cam Video Editor ( / editor ) I STARTED WITH TAKING OFF A BOLT HERE AND THERE, BEFORE I KNEW IT. I WAS IN TOOOO DEEP AND WAS AT A POINT OF NO RETURN. I WAS GOING TO TAKE IT TO THE MECHANIC ON A MONDAY, SINCE IT WAS SATURDAY I POKED AROUND AND GOT MYSELF IN SOME OFF THE DEEPEST $$$$ I HAVE EVER BEEN IN. HOPE THIS SERVES SOME SORT OF HELP. MY FIRST EVER.
At exactly
Whhoooaaaaaaaa dude, all you gotta do is remove the lower plastics, gas pedal assembly (3 12mm nuts and 2 8mm bolts) and then about 4 or 5 10mm bolts to drop the BOSE amp and bracket and you have access. Took me a little over 2 hours. This is the epitome of OVERKILL
Hell yeah, tear it all down! Yes there is an easier way to get to the faulty air mixer but I can appreciate you digging until you hit bedrock. You learned plenty while others are looking for the magical, TH-cam shortcut. Sometimes you just gotta handle your shit.
Thanks for the video. I just finished replacing mine. Took about 3 hours, though should have been about 2 if I had read below about pulling the gas pedal and amp bracket. Fairly straight forward with once you figure out how to get all the screws out. Used a combination of the 5.5 socket and wrench for the actuator, a 6mm wrench for the heater plate I shouldn't have had to take off , 10mm socket for the amp bracket and a 12 mm socket for the gas pedal. The video above helped out with seeing where the screws were, and VERY glad I didn't have to take the dash off!!!
Just FYI you don't have to take that much off. I just removed mine & didn't take long. Remove the black box w/ 3 plugs that is between that actuator & the OBD2 connector. Disconnect the gas pedal assembly & swing it out of the way, then the metal bracket & aluminum module that the black box bolted to will slide down & out. You can then get to the actuator bolts.
Quality video showing most of us that own one of these older models of Nissan Titan, Armada and Infiniti QX56 which are pretty much all the same Truck/SUV, just what is behind the dash. Also, I like that you showed us the exact location of the problem Blend Door Actuator as I can hear my issue in my truck too. Yes, I heard there are easier ways to do this, but the video still was very informative. Just being able to see the faulty BDA makes me more prepared to replacing mine. Now I know how to get to the Heater or AC components on the Passenger side that I hope never fail, behind the glove box compartment. BTW if you are still in that zip code LMK.
Thank you for the video. I was like whoa!!!! That sure is a lot of work to replace that part. But indeed you didnt have to do that. There are other videos that show how to replace that part with a little less intrusion. This video reminds me when i decided to see how a tube tv worked. It was unplugged and i touched the compacitor and it blew me across the room. I was 13yrs old and put a streak in my pants. :)😂
I have the exact same make and model Nissan.....I also have the exact same problems with it. When I turn the truck off or very shortly after ignition there is that annoying thump...thump....thump....now my horn just suddenly stopped working as well as my cruise control, and volume button on the steering wheel.....thanks for sharing this video it will definitely help me to resolve the problems.
What a mess, thanks for the video you have helped me out big time. FYI you can not get to that paticular acuator from the stereo and glove box. good job man.
My InfiQX56 does the same exact thing, but after I shut the truck down if I turn the head light switch to off it shuts the tick.
7:11
It's called the steering column air bag Clock Spring. the cruise control might not be working as well or the volume control on the steering.
Just did mine today and it was a lot quicker - take off the trim and steel plate below the steering column. Then remove the airbag controller and RF amp (if equipped). The bracket that held those two pieces is your worst enemy. I trimmed about 3 inches off mine (only the side closest to the center console) with a dremel because that piece prevents you from having easy access to the actuator. With it trimmed, the whole operation is not too bad. How much have people been quoted at the stealership to get this fixed?
Bro! Wow thats like everything, Hey man I Understand good job man because nowadays we gotta fix our own stuff, its better than paying $ we cannot afford, plus learning is priceless 👍 This the only video of underdash harnesses I've seen, I also have a Titan, electric gremlins having a party in there I look everywhere for more information, your video helpful to me i appreciate it. Best luck
that actuator has good rhythm....i was making a beat to it. lol... nice man
just saw the video you were referring to,notice the accuator he is replacing is driver side air bag is. the one I replaced is above the gas pedal. not even close. I knew there is no way,trust me I would have loved to show a better way.
great video michael...thanks for sharing.
I just replaced the blend door actuator,put everything back but now my truck won't start.I charged the battery and all Inhear is a
way to stick with it. Nice job!!!!!!
I was not gonna film it,but I figure my mess can help someone it would be worth it.