When I read your comment that you have to see the plug for your opinion is when I found out the spark plug was loose😄 I tighten it up it runs better 💯 I appreciate you for watching!! your comment matters a lot!!
I found out the spark plug was loose and never knew I tighten it up and it runs way much better but from the exhaust prospective it is leaking which means there's an air leak and I need to fix it with a new gasket but I'm going to keep looking for a new exhaust soon to change 💯
Sounds lean. You might have an air leak. When you rev it, It takes too long for the idle to come down. Buy a can of brake or carb cleaner. Spray around the intake, at the carb and the engine side. If you hear a change in engine speed, you have a leak. Also use the spray and check the crank seals 👍🏾😁
I 100% agree with you I care about this motor so much I don't want nothing to happen to it if I don't fix minor problems that will turn into something big and leave me peddling again which is still okay but an assistant motor is way much better 💯
I have someone in the comments that needed to see the spark plug for their opinion and when I check the spark plug after reading that comment the spark plug was for sure loose about more than three threads out I tighten it up and it runs perfectly fine but if it wasn't for that comment I would have never looked to check because in my mind it was still starting I guess it is okay to check the spark plugs sometimes they come out a couple threads without anyone knowing when it comes to owning a motorized bicycle 💯
your definitely lean..its taking way too long to idle when ya rev it so more than likely an air leak or your carb needle setting is too high...and your idle needs to be slowed...get the idle to the point that the endgine will die then give it a 1/4-1/2 turn the other direction and youll be good..and find what is causing that lean condition quick or it can get bad quick...didn't you put new gaskets in recently?...did you go back and retighten the head bolts after a run or 2?..that may be the culprit...great vids by the way..we relate in alot of ways..keep it up!
Id have to see the plug to giv my opinion
When I read your comment that you have to see the plug for your opinion is when I found out the spark plug was loose😄 I tighten it up it runs better 💯 I appreciate you for watching!! your comment matters a lot!!
Making that money
What your mix ratio?!
Currently using 40:1💯
I found out the spark plug was loose and never knew I tighten it up and it runs way much better but from the exhaust prospective it is leaking which means there's an air leak and I need to fix it with a new gasket but I'm going to keep looking for a new exhaust soon to change 💯
Sounds lean. You might have an air leak. When you rev it, It takes too long for the idle to come down. Buy a can of brake or carb cleaner. Spray around the intake, at the carb and the engine side. If you hear a change in engine speed, you have a leak. Also use the spray and check the crank seals 👍🏾😁
I 2nd mybikes motion 😁👽👍🏻
@@Op1zilla 3rd, it doesnt sound bad, but it can cause damage if left unfixed.
I 100% agree with you I care about this motor so much I don't want nothing to happen to it if I don't fix minor problems that will turn into something big and leave me peddling again which is still okay but an assistant motor is way much better 💯
I have someone in the comments that needed to see the spark plug for their opinion and when I check the spark plug after reading that comment the spark plug was for sure loose about more than three threads out I tighten it up and it runs perfectly fine but if it wasn't for that comment I would have never looked to check because in my mind it was still starting I guess it is okay to check the spark plugs sometimes they come out a couple threads without anyone knowing when it comes to owning a motorized bicycle 💯
@@yomontOME everything on these bikes get loose even the spark plugs lol! But I’m glad you caught the problem 👍🏾
your definitely lean..its taking way too long to idle when ya rev it so more than likely an air leak or your carb needle setting is too high...and your idle needs to be slowed...get the idle to the point that the endgine will die then give it a 1/4-1/2 turn the other direction and youll be good..and find what is causing that lean condition quick or it can get bad quick...didn't you put new gaskets in recently?...did you go back and retighten the head bolts after a run or 2?..that may be the culprit...great vids by the way..we relate in alot of ways..keep it up!
Just found out that exhaust gasket is no good I will replace it soon 💯
Thanks for watching!!
Merry Christmas and a happy new year to you and your family ✌👀👍
Merry Christmas