ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- Make a very strong and small cutting torch with a few broken lighters
.
.
t.me/creative59
creative596484
handmade#
handcraft#
#torch
#get
#fire
#tool #creative #tools
#tools
#burnout
#tool
#creative
#minitools
#tool #creative #tools
@creative4979
#@creative4979
#creative
#torch #cute #cat #soldering #welding #cutting #cutter #fire #minitools #tools
Link to similar videos👇👇
• How to make a burner w... • How to make a small an...
• How to make Jet engine... • How to make a Jet torc...
• How to make a standing... • How to make a high tem...
• How to make a small an... • How to make a mini tor...
• Making a jet burner wi... • How to make a gas and ...
• How to make a standing...
Amazing! Changing the gas canister must be fun😅
A home made bomb to be sure
Excellent video ! 👍
good idea but you need a gas bubbbler so no back explosion when gas runs low
Excellent tutorial...
This gentleman MUST be Russian. If not, I apologise. Although it is very interesting, I have concerns over its safety. Commercial torches have flashback arrestors, which do not allow the flame to travel down the tube and into the gas bottle. I did not see such a device on this. If I have missed seeing such a device on this tool, then I must apologise once again. If it is safe then it will be most useful to jewellers so that they can "weld" jump rings, such that closed link chains can be made. Please carry on making these "unusual" items, stay safe so that we can enjoy your work for many years. 👍
Гасители обратного воспламенения ставятся на водородные горелки, пропан в трубке не воспламеняется
Был бы русский, то болт и спицу приварил бы к баллону 😁
Nobody cares what you have to say
He's Russian,Nicaraguan or Cuban.
Flashback arresters are normally only used where there is an oxygen supply, as there is no oxygen supply that’s why he did not fit one. But considering a jewellers butane torch can be bought for about $40 I would buy one of those and know I was safe.
nice! work thanks for sharing...😊
Be careful I work in the metal industry and often use cutting torches risk of flashback is very high.
I don't know nothing. Having said that, is there a way to prevent that?
I came here in a serie of "DIY hidrogen gas from water" videos and wich they said that to prevent the flashback a guy put ciggarette filters in the pipe, another guy put glass fiber; and another guy put (i think) like... ...(don't know how to say it, i'm from Argentina)... the metal shaving for wash the dishes.
Also in all those diy hydrogen they use a second mini vessel with water and air between the hydrogen production and the blowtorch. Could it be implemented in this kind of proyect?
Are these workarounds effective?
That's cool, and for all of the effort, you get about 10 minutes of burn time, LOL !
Excellent. Thanks for sharing.
Creative and handy, but there are ready made long nosed flame gadgets available without hustle and risk of bursting fire. In fact, there are so many propane attachments and bits available online that could make a fantastic yet safe project like a breeze. All in all, great job for something to demonstrate as doable.
The music kept me from wanting to watch the video. Best of luck to your channel.
Thanks for your new idea and tactic nice talent , Norman Wray 😅
درود بر شما. به به به این هنر ظرافت واقعا عالی بود. ❤❤❤
very good very nice
Finally a way to rid the world of used popsicle sticks and melt solder into little balls...
Great idea, thanks for the video.
So far so good, still waiting for the "metal _ Mini Cutter" part: There is nothing wrong with the project as it is, but I guess click baiting must have become a habit by now.
Awesome diy continue
Thanks for sharing!
That is an excellent idea. Thank you for sharing.
Thanks for sharing 👋👍
واقعاً عالی لذت بردم ❤❤❤❤
Indeed a handy little tool, a longer tube mabe, nice vid
سلام..دستت درست استاد🎉🎉🎉
Creative is very handy with his hands it must be said - well done fella
SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER
Thinking quickly, Dave crafted a butane torch from copper tube, wood, glue, and a butane torch!
Indeed. The only benefit here is flexible head & low profile for tight reaches
良いアイデアと簡単な方法、サポートします
I love it. Greettings from Argentina.
I will stick with my mini torch...it does the same thing. But, this is pretty cool.
Amazing work brother
Tweakers Dream Toy
Awesome! Wanted to make one of these for a while
I tried it making when I was 15 but I was making burner also but failed due to making smaller holes to pass the gas hole was 0.70mm so gas coming out was not so brilliant, today when I saw it it reminded me of my memories....
Great job but still needs more improvement....
It's not the rugged one....
Lebih irit gas untuk pematrian logam 👍👍👍👍👍
How do you shut off quickly the can of gas if it has a leak and flames are coming from it. 🤣🤣🤣turn that wooden knob . Oh so funny.😂
Seems like a neat fun project. Don't know if you have limited access to tools or what but here in the states they make small butane torches for as low as 5 bucks.
As others said PLEASE be careful... a tip over COULD go very bad.. not saying it will... just saying.
Neat little project though!
Merci j'aime votre technicité c'est genial
😮👏👏👏👏👏👏💯 you so cool 🎉
Good Job ! 🤩👌💪Not like a most clickbaits with patents that don't work . Greetings From Poland ✋👊
Really appreciate your ideas
I had problems with bracelets soldering cause of tiny pieces. Now you solved it, thanks a lot 🙏🏼
8:00
Nothing gives me more pleasure than watching someone teaching how to hold by hand a piece of wood and throw a drill at it to make a full length hole into it! Safety first, I presume!
Great Idea sir
Nice and excellent
Well Done....
Very interesting
Ah y d wow na wow😂😅
فوقالعاده بود🎉🎉🎉
aw mate this is awesome thanks for showing me how i can blow myself up but seriously i am quite surprised by this lokks hot enough anyway
Когда есть такая в арсенале - это неплохо👍
Good idea
I feel like I'm on a list after watching this
Very nice
I couldn't help feeling like I was looking over the shoulder of a bomb maker.
Great Job. Cool! 👍👍
Nice..... can't wait to see the show when you have a back flash happen!!!! (btw, anyone watching this don't make one like this guy did! There is no safety feature stopping this setup from back flashing, then..... Boom goes the dynamite all up in your face!)
Absolutely, this is not a safe tool. I've used a variety of torches over many years and I would never use something like this.
Nice idea
way cool
It's a cool little device. Should be able to slice right through brake discs with that champ right there. 😄
Awesome 👍🏻
Looka lika meth smokaz dream torch!!
Nice work, just a little disappointed when it came to the metal cutting part. If you can actually achieve that, maybe you would really have something there.
What type of torch tip u r using u didn't say anything about it my friend ?
Excellent!!!
Thank you for sharing!
It's almost 3rd grade art class with a touch of freshman High School Shop class
Someone buy this man a drill press.....he'd be unstoppable
Nice bro
سلام احسن ابداع
سلام اون لوله مسی رو از کجا میشه گرفت؟
I tried using a lighter. But it didn't work. What am I missing?
Stümperhafte Arbeit
Ficou top!!!!!
Cool😮
Love it
Can use it for brazing copper or cannot...
It looks very good, can this flame be good enough for brazing ?
Impressive. But needs better mods.
So creatife and very simple to use the tool
Just buy a bernzomatic brazing torch??
Sangat kreatif sekali..!
Да, круто!!! Сварганить из ничего вполне рабочий инструмент!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺
Sehr primitiv ! 😮
Espectacular 🎉 súper sencillo una herramienta de gran utilidad gran trabajo 👍🏻👍🏻👍🏻
👍🏻👌🏻👏🏻👏🏻😃❕ G-G.
So what would be the purpose for this little torch? I mean, what would you use it for?
Litterly hundreds useful things.
Like It may be 100% required in manufacturing and repair of Jewelry, soldering, shrinking heat shrink tubing. So many in fact I'm having trouble thinking about it.
👍👍👍 Bellissimo ,bravo
I think I could buy one faster and easier.
thanks
Neat!!
самое больше мне понравился коммен этого, который написал: он наверно русский!!!
I would have the can upside down. When you fill up a lighter you hold the can upside down as it is fluid.
Good sir
Brilliant
What kind of glue are you using
Instead of glue holding the mechanism on the gas can why not use pipe clamps. Just a thought.
Ok prfekt👏👏👏👏👏
is it possible to connect two nozzle ?
I didn't get any of the allahuakbar notices before commenting but I am pretty sure you can get small torches that hook up to proper propane/butane tanks for around 20-30€!
Awesome but to much time for so short of life in such small canister. Again AWESOME project. Thanks for sharing
it works with propane as well, hook it up to a BBq tank and off you go ..