Being an elderly, almost 80 years old, I like to keep my mind active but because it is difficult to see which is the right or wrong side of the fabric on the band, I find it difficult to figure it out. I'll keep trying. Thank you.
I’m trying to make this hat for a 12ft skeleton. How do you come up with the rectangle size for pattern piece 3? I managed ok with pieces 1 & 2. The head circumference is 45 inches and the front to nape measurement is 27 inches
@@jackphilly I'm sorry to leave you hanging. I ended up just winging it. I just checked and I still have my pattern so I scanned it in but my photo scanner wasn't big enough so it's folded in half. I'm going to upload it now and I'll respond to this comment with the link.
Hey! For the 3rd pattern, just make sure the total measurement of the 1st curve is the same as your eyebrow tip to eyebrow tip measurement when measured along the hairline. The height of the brim will remain the same. For the 1st pattern, i marked 7.5 to make a smooth curve. Just draw a straight line and slightly curve it to the outer side.
Taking 57 cm /6 = 9.5 when you add the seam allowances of 1cm on each side you are left with a head circumference of 45 cm? I think the measurement should 11.5 centimeter?
What fabric did u use? Linen ?
Hey! It’s Premium cotton.
How pattern 3 measurement is done
Being an elderly, almost 80 years old, I like to keep my mind active but because it is difficult to see which is the right or wrong side of the fabric on the band, I find it difficult to figure it out. I'll keep trying. Thank you.
You're such a live saver! Been trying to find a way to measure a hat that can fit my head instead of just following premade pattern. Thanks!
Glad to be of help❤️
Wow. The bill part of the hat was a simpler idea than I thought. I'll try making this then! 🙌❤️
Because of videos like this one, we needs special category or some kind of a special Like Button on YT. Extremely useful. Thank a lot!
Glad it was helpful!
Your tutorial is so detailed!
This is exactly what I wanted. Thanks for your sharing !
@@pnc3500 you’re welcome. Glad you found it helpful!
Great video, thanks 👍🏾🙏🏾
Thank you very much. I was looking for an explanation of how to create the pattern. And you have done it excellently
@@JoseMunozRojas I’m glad you found it helpful ♥️
Love this! I always find baseball hats that are too big for my head, so thank u very much for the tutorial!
Glad you found it helpful♥️
How she has measured pattern 3
I appreciate your talent and Hardwork.
@@sahilkaler Thank you so much!
I'm so thankful!! I was looking for one forever
Happy to hear that❤️
thanks for a fabulous tutorial, guidance and pattern, well done, off to the sewing room
Ee vettiyathu eandhanu A4 pepar ano please reply
@@fidhahanna2515 yes! A4 paper aanu
@@BrownGirlDIYs ok thanks daa❤️💕
Nicely done!!
Thank you❤️
Thanks for giving me this video, and now I will make my own cap👍👍
Happy to hear that❤️
Perfeito! Muito didático, muito obrigada!
Nice. Thanks for sharing.
Thank you! Glad you liked it♥️
Thank you! This is so useful and easy to follow
Thank you! Happy to hear that❤️
I’m trying to make this hat for a 12ft skeleton. How do you come up with the rectangle size for pattern piece 3? I managed ok with pieces 1 & 2. The head circumference is 45 inches and the front to nape measurement is 27 inches
Hi there- did you end up doing this? How did it turn out?
@@jackphilly I'm sorry to leave you hanging. I ended up just winging it. I just checked and I still have my pattern so I scanned it in but my photo scanner wasn't big enough so it's folded in half. I'm going to upload it now and I'll respond to this comment with the link.
@@srhsodaI would love the pattern for the Skelly as well.
Muy interesante gracias por compartir saludos
تسلم ايدك انتى مبدعه
What type of thread and needle is used for this project please
@@soldiercoleone Hey! It’s all purpose sewing thread and needle
One of the nicest hat constructions I've seen. I am not seeing the link to the patter so I can try this myself.
the first few minutes of the video show you how to make the pattern specifically to fit your head.
How can I get the pattern?
Great video, Can you make a video designing a Men's baseball cap?
Hey! This cap can be used by men too
Hi pattern 3 on wat basis should i measure if HC is 43cm and on 1st pattern how 7.5 plz tel i wanna make for my baby of 4 months
Hey! For the 3rd pattern, just make sure the total measurement of the 1st curve is the same as your eyebrow tip to eyebrow tip measurement when measured along the hairline. The height of the brim will remain the same. For the 1st pattern, i marked 7.5 to make a smooth curve. Just draw a straight line and slightly curve it to the outer side.
@@BrownGirlDIYs thankyou by the way very great descriptive videos helps a lot
@@creative7885 Happy to hear that♥️
Wow i am inrestng❤
The button was genius!
Thank you!
Thank you so much❤️
👏👏👏👏👏
Hello, should there be a correction in the length, you show 13.5 centimeters should it not be 16.5?
Hey! Length = half front to nape - 3cm = 16.5-3=13.5
@@BrownGirlDIYs Well, you should see the result when I did it like that, really really small. 1 cm seams. I now tried 16.5, still too small.
Taking 57 cm /6 = 9.5 when you add the seam allowances of 1cm on each side you are left with a head circumference of 45 cm? I think the measurement should 11.5 centimeter?
شكرآ لكي تحياتي 😊😊😊
im confused. how did it become so flat at 9:50?
Hey! Cut notches, make sure not to cut the stitch line. Then top stitch as shown in the video
@@BrownGirlDIYsthank you so much💗💗 im a beginner and im so excited to try to make this hat. lovely tutorial😊😊😊
@@deffonotissy Thank you! Glad you liked it ❤️
You should press each time you turn things inside out. Just sayin' . It will look much neater! 👍
Thank you for the tip!♥️
Работает или нет эта хрень? Хотел своему заказать на Алиэкспресс такую же подругу
it would be better to use a buckle instead of velcro, I think.
@@dony1065 Yes! Both works great.
I appreciate the tutorial, it's a nice pattern except, the seam allowance was not calculated in it.
Hey! The seam allowance was not added when making the pattern but the fabric was cut with seam allowance
Do you have a free pattern?
U have to use the measurements from the video
Hi plz reply
te amo
594❤
Que te pasa no es la misma que la carátula del video 😂
Remedy: $4.99. 2 for 1 deal at the Carson T-Shirt shop 😆
Hers is much cuter! 🎉