How to change a front shock strut on BMW 330i 3 (E92) [TUTORIAL AUTODOC]
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- How to change a front shock strut on BMW 330i 3 (E92) 3.0 Coupe 01.2005-12.2013 [TUTORIAL AUTODOC]
Shock strut on BMW 1 Hatchback (E81) (09.2006 - 12.2011) / BMW 1 Coupe (E82) (10.2006 - 10.2013) / BMW 3 Touring (E91) (12.2004 - 06.2012) / BMW 3 Saloon (E90) (06.2004 - 12.2011) / BMW 3 Convertible (E93) (05.2006 - 12.2013) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce shock strut: MONROE, STARK, KYB, SACHS, RIDEX
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co...
Springs: www.autodoc.co...
Springs for BMW 330i 3: www.autodoc.co...
Shock absorber: www.autodoc.co...
Shock absorber for BMW 330i 3: www.autodoc.co...
Strut mount: www.autodoc.co...
Strut mount for BMW 330i 3: www.autodoc.co...
LIQUI MOLY Chain Spray: www.autodoc.co...
WD-40 Grease Spray: www.autodoc.co...
LIQUI MOLY Fast Cleaner: www.autodoc.co...
All video and pdf tutorials on BMW 330i parts replacement: download and watch at AUTODOC CLUB - club.autodoc.c...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ www.youtube.co...
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► BMW car repair tutorial - • BMW car repair tutoria...
► BMW 330i 3 (E92) car repair tutorial - • BMW 330i 3 (E92) car r...
► How to replace air filter on BMW 330i 3 (E92) - • How to change air filt...
► How to replace front springs / front coil springs on BMW 330i 3 (E92) - • How to change front sp...
Mobile Shop: m.autodoc.co.uk
📢 AUTODOC in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
TH-cam: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
© 2019 AUTODOC GmbH All rights reserved
![How to change rear shock absorber on BMW 330i 3 (E92) [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/1xdeRNNju_s/mqdefault.jpg)
![How to change a front shock strut on BMW 3 (E46) [TUTORIAL AUTODOC]](/img/n.gif)
No need to take apart all control arm links and tie rod end, just LOOSEN the inner ends of 2 control arm links and the whole thing will drop, allowing the strut to be removed.
Thanks, even the workshop manual didnt call to remove wishbone
Well filmed and helpful, tech was handy too. Should always change the top mounts at the same time. Whilst the bearing may feel okay, the rubber in the top mount had flattened and needed replacing, should sit higher than that (7:00)
Old vs New shot would demonstrate the difference in height to justify replacement :)
They're relatively cheap and the customer will feel the difference in ride quality.
I had to go back and put in new top mounts because I didn't replace them and they were giving me problems... so this is good advice.
Extraordinary detail ! Super helpful !! I learned lots !!! Thanks mate . 👊🏼 🎯
If my tie rod is rubbing on the sway bar is it because I installed the tie rod first and it wasn’t straight or is something else wrong
Nice video - the only thing missing on required tools was the four post ramp! Working outside, on the floor, in front of my house I don't have access to one......or a garage. That's obviously not the fault of the video - which I can't fault except to say that everything came undone very easily
Thanks for the clarification, we will take that into account in the next videos.
AUTODOC
I mean frankly I do this on 4 jack stands no issues. Wish I could have a 2 car large garage but eh it's not that bad.
Good video..Slow and smooth recording..
Thank you for your feedback! Our specialists do their best to make or videos look as good and informative as possible. Thank you for staying with us. Best Regards, Autodoc Team
True
at 10:30, the screw of the control arm should be the other way in!
Thank you for your feedback.
A slight error is allowed when assembling the suspension.
We will certainly try to prevent this from happening in the future.
Best regards,
Autodoc team.
Excellent observation ! Thanks for sharing detail .
Excellent.
Yeah
good
What is the tightening torque for the 18 hex. nut on the stub axle?
Good 👍👍👍
Hi there, great video. I have an LCI 2013 bmw e92 320d with M Sport suspension. I cannot seem to find the exact difference between parts for normal suspension and M Sport. Would these same parts in the video fit and keep the same type of ride quality/height?
Same dude same
@@Mdot401 wrong, M sport have different shocks and springs
I tested 2 visually identical cars e93 same day one had m sport suspension and another one didnt,non m sport was a lot softer while m sport a lot firmer
Do you need a wheel alignment after this job?
Yes.
Yes, after any work related to the suspension of the car, it is recommended to carry out the alignment/camber correction.
You do not need to do all that that to remove the shock. Make a new vid
Thanks for your comment. We are constantly working to improve our videos.
So you know how to do it with less work? Why don't you just make your own vid 😂
Can you please elaborate / specify what the simpler alternative method would be ?
@@ThunderbirdRocketI wrote this over a year ago and had to watch the video to remind my self what he even did 😅. Basically you don’t need to disconnect all the suspension arms from the wheel carrier. Loosen the tension arm at the sub frame , don’t need to remove the bolt. Jack up the strut to remove tension from anti roll bar link, remove the top bolt, slide out the anti roll bar linkage from the strut. Now you can unbolt the strut from the chassis and top mount. The whole mechanism will drop down. Just be careful of the fender and you can unbolt the wheel carrier strut bolt and slide the strut out.
In short you’ve loosens two bolt compared to removing all the arms as seen in the video.
@@zureairesponse for you, if you want to make a video 😂
Врх !
😘😘😎😊😘😚😘😘😘😘😊😊😊😊😎😅😊😘😘😘😘😅😗😅😊😗😗😅😊😅😊😅😅😊😅😗😅😊😅😅😗😅😁😊😅😅😊😅😅😅😅😊😗😄😅😊😗😅😅😊😗😅😅😊😗😅😅😊😗😅😅😊😗😗😎😅😊😊😊😊😅😊😗😗😎😅😊😗😗😎😅😊😗😗😊😅😊😊😊😊😊😅😗😗😗😘😘😊😚😎😎😎😅😎😎😗😗😗😗😗😗😗😗😗😅😗😗😗😗😅😊😗😗😅😎😊😗😗😅😊😊😗😗😎😅😊😗😗😊😅😊😗😗😅😎😊😗😗😅😊😊😊😊😊😅😊😗😗😅😎😊😗😗😎😅😊😗😗😎😅😊😗😗😎😅😊😗😗😅😎😊😗😗😎😅😊😅😗😃😊😅😅😗😃😁😆😆😆😅😅😁😆😆😆😄😂😁😀😀😀😀😀😄😆😆😆😅😅😁😆😆😆😆😅😁😆😆😆😆😅😁😆😆😆😆😆😆😅😗😃😊😅😗😃😊😗😗😗😅😊😗😗😗😅😗😗😗😗😗😗😗😗😗😅😗😗😗😗😗😗😗😗😗😗😗😗😗😗😗😗😗😘😎😊😗😗😗😗😗😗😗😗😗😚😗😗😗😘😎😚