DB KILLER VS CATALYTIC CONVERTER/AKRAPOVIC MUFFLER SILENCER INTALLATION.
ฝัง
- เผยแพร่เมื่อ 27 ต.ค. 2019
- What's up mga pardz! Check out my review, installation and comparison of this two different kinds of universal 51mm silencer.
51mm TRADITIONAL DB KILLER vs 51mm CATALYTIC CONVERTER.
ALIN NGA BA ANG MAS MAANGAS?
DON'T FORGET TO SUBSCRIBE! 😁👌
#Z200s/x #Catalytic #DBkiller
Check out the installation and review of my akrapovic dual outlet muffler with 51mm stainless elbow.
Watch on the link below. 😁👇
th-cam.com/video/tb1JrV-rKV4/w-d-xo.html
Congrats2x KaMotoFriends at Happy New Year 🎉
Try both catalyst to install sir i'm waiting for that review
hihi, I'm from Indonesia I thank you for the results of the trial you did, it really helped me in choosing which one is best for the ears of people around 🤟
Great job. Thank you for putting the clips one after another which helps a lot with comparison. Could you do the same with a phone and dB meter?
Thanks for the appreciation, once i get a chance i will use db meter for better comparison. Thank you ride safe
Ayus paps, gusto kong madinig ang effect ng mga yan mero kasi kasa "traditional" db killer yung pr2 na nabili ko.. maganda pala tunog. Ayus yung video po thumbs up👍
sir ask lang how if pag sabayin install catalytic and db killer, mag fit po ba and ano kaya posible na tunog?
Mas ok sakin yung screen type na silencer, mas less impact sa performance. Mas ok din tunog. Hehe. Nakagamit na ako ng dalawa. Pero mas ok open walang sakal. Haha. Nice vid!
Salamat sir, plano ko din mag open n lng talaga bahala na si batman pag nahuli HAHAHA salamat po, RS po sayo lagii
@@dangzkie-moto4283 mahirap pag open, baka ma puruhan ng mga buwaya.. hahaha
@@RussTeeRider oo nga e hahaha
Ginawa ko yung lumang air filter na cone mas malalim yng tunog
Have you tried both catalytic and db killer installed and hear the sound of it? I would appreciate if you could give it a try bro. Thanks
I did it in my MT 09, the sound was much lower while in neutral. But during acceleration the sound is loud as nothing being used inside it.
@@THFerrari you are right db killer and converter suppress the sound only in low rev
Nice review 💪 its a big help
tip ko lang po is get a dB meter. para makita namin kung gaano kalakas. meron din apps na pwede magsukat ng dB.
Highly appreciate your suggestions! Thanks and rs always
bago lang ako sa youtube channel mo idol and nka subscribe at nka notification bell ako sayo 😊😊
Maraming salamat po, keep it here im going to upload more videos soon! More power and ridesafe!
ayos paps😍
Salamat paps, more power and rs always
Thanks - kind of poor audio tho - but young man, do they let you ride in those fish fins? I've seen everything but that would top riding 6-up.
Galing nyo nman boss.
HAHAHA ganun lang pala style sa hayup na spring na yon. Thanks brad
Sana kinabit mo sabay para mas humina at mas ma-bass yung tunog
Can i install this in Austrin racing gp1/r in zx10r or you can suggest me the best way to reduce the sound of austrin racing with out any compromise
It is possible but, i don't recommend. It will restrict your exhaust air flow so hard that may cause your engine to get choked and loss some power. If you really want to reduce the noise of your exhaust then, go for big and long mufflers instead. Hope it helps, ride safe!
@@dangzkie-moto4283 ok
Use elbow with catalytic installed if you still wanna use your Austin Racing. Modern engine nowadays requires catalytic (stock elbow and pipe)
Can we install both catalyst convertor and db kiler?
Yes you can install both, there's a catalytic converter with built-in silencer. You can buy it on shopee or lazada so you dont have to buy it separately . Ride safe always
Dangzkie - MOTO oh okay thanks , you too ride safe
niiiiiiiiiice...mas like ko po nakasilenced...sarap sa ears... btw pls use mic
Hi, is this CATALYTIC CONVERTER for Acrapovic or LeoVince replacing the TM catalyst? tnx!
Yung nalagay yung catalytic converter boss hindi na po ba ganong bulahaw yung at humina na sya?
Ayos pardz ganda ng muffler mo. . .ridesafe pardz
Salamat po! Ride safe always and more power!
kahit anu paps, mhlga thimik hehehe,,rs po, stay connected
Salamat po! Rs always and more power!!
Paps naka sc project kasi ko ngayon. Balak ko sanang lagyan ng catalytic converter sa may elbow tapos sa end nung canister silencer naman. Di kaya magka problema sa temprature ng engine ko pag ganon?
Walang problema dun paps
Mas sakal pa nga yung stock elbow natin at may silencer pero di nmn nag oover heat. Basta tamang level ng egine oil at tamang timpla ng A/F ng carb hindi yan mag over heat
What if pagsabayin mo sila e install? Pwede kaya yun?
sir great video..but bad audio..., kelangan mo po ng mic for better soundcheck po..naka headset na po ako pero masmalakas parin ung trebble
pwede po ba parehas ilagay ung db killer at catalytic converter thanks
Which one is best for base
Nice vid bro
Nice review idol. Thanks. Na dikit at tamsak na din. Ride safe
naka db killer din yung mic ng cam nyo?
D po pwd ung converter s pipe nilalagay?
Saktong sakto. Ito video na hinahanap ko
Thanks po sa appreciation! More power and ride safe always po!
@@dangzkie-moto4283 sir, how about yung db killer ata yun, pero butas nya nasa gilid, at mesh ang labasan, okay ba yun?
Mas ok sna ung my cathalytic pra mababalik na ung back pressure ng exhaust
Paps pwede kaya traditional at catalitic baliktaran nmn pla kabit
Hello if I want to reduce exhaust noise...can I use both these together will it reduce the exhaust sound please tell
Yes, it is possible, you can buy at shopee where the silencer and catalytic attached together so you can install it together at once. Ride safe always! 😁🙌
It will reduce the noise of your system more 😁
@@dangzkie-moto4283 yes I want that only
@@dangzkie-moto4283 does it harm engine while using catalytic converter?please reply
I think catalytic converter sounded best the db and open was not good
Camera setup ? Which action cam ?
Which one is best
Alin po pasado sa dalawa sa LTO po maraming salamat
Yung traditional db killer po, in terms of decibels mas mahina sya compare sa cat converter so i suggest kung iwas huli ang trip mo, go for traditional db killer/silencer
di ka gumamit nang decibel meter san mo sir nakuha yung 40%
Base sa pandinig boss, wala ako decibel meter na gamit ng LTO mahirap. Bumili non, at kung cell phone apps ang gagamitin ko hindi accurate. Yang percentage na ginamit ko sa video is base lng sa pandinig ko.
boss pa try dalawang silencer magkasabay kung mas tahimik
Natry naba ilagay ng sabay pareho??
Hindi pa sir, pero posible sya ilagay pareho 😁😁
Lods kong sabay sila ilalagay ok lang ba?
Okay lng din sir kung sabay sila install kaso sir prone sa kalansing lalo pag di naipit ng maayos yung at at db killer. Much better bili n lng jayo ng catalytic na may built in silencer na po. 😁🙌
Paano kung dalawa ilagay paps?
Boss hindi ba fit sa muffler ilagay yung catalytic converter na silencer kaya sa elbow mo nilagay?
Hindi fit sir saka wala pong lock yung db killer at catalytic kaya dun sya iniipit sa pagitan ng muffler at elbow air
Maraming sslamat bossing.
Pwede ba same ilagay?
Matanong ko lang po . anong size ng 1st silencer na ginamit nyo? Exact 51mm po ba ? Or 50.8mm ? Naka akrapovic din po kse ako 51mm size ng elbow . hope mareplyan mo po salmat ride safe
Good day sir!! Standard size po gamit kong silencer at catalytic converter perfectly fit sa 51mm inlet or 51mm elbow. Exact size (50.08 or 50.09) salamat po sa support! Ride safe always!! 😁🙌
Big help
Thank you so much for the appreciation sir! Always ride safe god bless 😁🙌
boss san mo nabili muffler at magkano pa link nmn
bossing ask ko lang kse prehas ako ng inorder sayo sa exhaust at tradishonal db killer pero hindi fit ung db killer ganon din ba sayo?
Nka big elbow kaba sir? Baliktarin mo ang lagay ng silencer dun mo sya ipasok sa elbow. Maliit yung tubo sa loob ng muffler natin kaya di kasya yung silencer. Parehas tayo.
Dangzkie - MOTO bakit po sa vid mo napasok mo naman ung traditional db killer?
@@noelsaliva334 baliktad pag kakalagay ko sir, sa elbow ko sya pinasok hindi sa muffler mismo. Nga pla nka big elbow ako 51mm. Di yan kasya sa stock elbow ng z200s.
Dangzkie - MOTO sa vid boss catalytic convter po ung nilagay mo sa elbow, ung db killer na isa po ung napasok mo sa muffler, 51mm lng din elbow ko po
@@noelsaliva334 ay oo nga, sir kung di talaga kasya yung silencer nyo sa muffler sa elbow mo na lng lagay ng nakabaliktad. Same result lng nmn din po yun hehehe. Sensya kna tagal na vids ko nireview ko pa muna ulit. Tama ka cat converter nilagay ko sa elbow kasi mas mataba un
Pwede po pa link ng silencer sa shopee?
Pa review naman po both nakalagay. Sana ma notice po
Paps na try mo ba.isalpak yung dalawa sabay..parang kasya naman ata..
Yes pwede sya install ng sabay kaso kumakalansing, much better bumili n lng kayo ng db killer na may built in catalytic na para isang salapakan lng
Yes pwede sya install ng sabay kaso kumakalansing, much better bumili n lng kayo ng db killer na may built in catalytic na para isang salapakan lng
Try mo pagsabayin
bawal ba pagsabayin yan paps?
mas mganda tunog ng catalytic medyu malutong' alam na paps taRa
Thanks sa suggestions paps rs always and more power! Balikan na kita
lods pag sabay kinabit Try monga kung tatahimik
Mas tahimik sya pag sabay, di ko na magawan ng video kase nabili na yung cat converter ko pero for me, im sure mas tahimik un.
What if ilagay parehas
Paps pd ba gamitin both😁?
Pwede sir, pero much better bili kayo ng db killer na may built na catalytic para isang salpakan n lng po tapos sure na hindi sya aalog sa loob ng elbow at muffler po. Salamat po rs always
boss dapat dalawa ininstall mo
Magkano score mo sa akra
3700 lng po sir quality made nmn po
i resonator mo nalang yan boss
Hahaha naisip ko din yan sir, kaso di ko alam para san un, pang FI lng ata un para mabasa ng computer box yung emissions ng motor
@@dangzkie-moto4283 9pwede rin naman yata yung sa carb kasi iweweld lng din naman siya para siyang stock catalytic converter yung bulky pero mas maliit
baligtad pagkakalagay ng catalytic style silencer
Di kasya sa mufflee ko sir, sa ganun paraan lng sya fit para sa exhaust system ko. Anyway salamat po sa panonood. Rs po lagiii
@@dangzkie-moto4283 lihaan o ifile mo lang lip ng silencer, less than half mm lang binawas ko sakin at napasok din ng tama
Sakin sir hindi kasya yung catalityc sa mismong screen tube ng muffler. 51mm po yung inlet ng muffler pero around 48mm lng yung mismong screen nya sa loob kaya di po kasya talaga hehehe na try ko n po kasi alam ko ganun din sya nilalagay tulad ng silencer