thanks to you, i have fully upgraded this pc and can run every game well that i play. i have upgraded storage,cpu,ram,thermal grease. and now it runs like a beast. if you want the parts i specifically used let me know.
technically, couldn't you add a 80mm or 76mm fan for intake on the black side grill? I've seen other videos of people adding smaller fans to the side there using rubber isolators, and was thinking of doing the same myself. I'm not sure if there's a comfortably located 3 pin connecter for a fan though.
Yup I did that. I bought a fan cable adapter and I'm able to add 2 more fans. I added a 40mm and an 80mm right below it since my gpu is too long. Fits perfectly.
I have it and Its just ok. I can't belive there's no way to make my own fan speed curve or anyway to adjust fan speeds in any way. Hp straight up says you can't with its motherboard. I'm looking to building my first pc because all of this.
@@PortzTech I added 2 additional case fans, one where the drive cage is and one pointing at the gpu. All noctua. Its an okay mod but without being able to adjust speeds it gets too hot still.
i watched your cpu video and i was wondering if you could use the cpu fan that come with the new cpu you bought or no? and if not could you wipe off the thermal paste off of the new fan on a napkin and put it on the old cpu fan
Yea, you can use whatever to clean the old stuff off. You should be able to use that fan. It should just bolt on. You can use the pre applied thermal grease if you want also
you can upgrade the motherboard but you would have to change the case too. and i highly doubt u can do much over clocking if any at all. but im not too sure!
hey man I also have another question ive had my pc for about a month now and my GPU temps have been going to 80-85 ive cleaned the fans but it still stays there what would be the best possible way to cool it down thanks again and I’ve just decided I’m not gonna have leds the green doesn’t really match the set up anyway
Honestly speaking here, I'm not really sure why ANY of these companies making ROUND radiators bottom placements are even legally allowed to do it. The CPU chip was always designed square for a reason, so that thermals could be evenly controlled. Even throwing your basic Square radiator into this system drops the temps easily by 10 degrees, easily. When you throw a round-bottomed radiator onto a square surface & expect it not to damage the chip & over-heat, it's actually Quite Stupid, In Truth.
Also for the cooling fan I know it was just a random piece of equipment but is there a specific size we should be looking for or max size we can upgrade to?
Hello first off id like to thank you for making this amazing video, My question. Well, 2 questions. Could the stock 400w Platinum Power Supply on this rig be enough for a Ryzen 5 3600(currently r3 3500) and a (1650s 4gb) rx6600 8gb? I'm wanting to say yes but wasn't too sure wanted to research before pulling the trigger on it or even a 6600xt just curious if anyone is rocking this setup with this mainboard from Erica. Thanks in advance to any replies. Really want to avoid getting the 500w PSU, its way too overpriced for what it is. Current Chip: 3500 6c6t 9mb L3 wanting to go to r5 3600 6c12t 32mb L3 Current GPU: GTX 1650s 4gb GDDR6 wanting to go to Rx6600 or Rx6600xt Current Ram: Corsair LPX 2x16gb DDR4 3200mhz C16 (overclocked with ryzen master auto @ 1600) was 1x8gb 2666mhz Current PSU: 400w Plat rated stock PSU (no plans to upgrade this psu I feel its sufficient)
What option do you recomend if i want really good temps but i also have a hp pavalion pre but with an intel i5 11400f. So what option do you recomend me?
@@jendeclercq703 Need to replace back plate on the back of the motherboard, but stuff like the Noctua U9S, Thermalright AK120 Mini/TS120 Mini will do the job
I saw a comment on hardware senses video and it said you could fit a 135mm cooler, if you want cheap than arctic freezer 7x, and for expensive I'm would say the noctua NH-C14S, personally I putting the 7x in my hp pavilion later on Hardware senses video th-cam.com/video/lHvKGDXIY5A/w-d-xo.html
I wish hp would know how many people love this case. V series is going to annoy so many the same way, buy so many people love the green and black. They may should have enjoyed the success and made new proprietary stuff rather than shitting on owners that didn't buy omen
Thanks for the vid brother! Looking to switch from the 256nve to a 1tb here shortly. Wondering what's your input? I've followed literally everything you've done so far except the 1660 super swap. Thanks for the great content !!
Hey bro, was wondering if you could help. So I’ve picked this pc up in the last few months (mine is a tg01-xxx or something and has a ryzen 3 4200g, not the same specs but I’m guessing the upgrade will work the same) and was wondering what I’d need to do to upgrade the case. I know the motherboard and case are specifically made for this pc, would they be the only things I would need to swap or is there other things in the pc that would need swapping if I wanted to change the case?
I just made a video on this. It is swapping the whole case and everything needed to do so. I would recommend watching it. It will answer most of your questions
that thermal paste is too little for ryzen, the pea size method only works for older intel chips, where the IHS was smaller, an x pattern is better for ryzen and newer intel chips.
![ILLSLICK X YOUNGOHM - We're The same [Official Video]](http://i.ytimg.com/vi/yUJNkobYR0E/mqdefault.jpg)
thanks to you, i have fully upgraded this pc and can run every game well that i play. i have upgraded storage,cpu,ram,thermal grease. and now it runs like a beast. if you want the parts i specifically used let me know.
I have the same pc. Can you tell me what have parts you have please?
@@paplayz i have model TG01 1022. but for the model i have everything upgraded is i5-10400F 1650 Super 16GB of T force ddr4 and 1tb samsung 970 hdd
@@paplayz i could tell you what you could upgrade for, for cheap
@@sphasmxl871 I have the exact version the video has. What did you upgrade your gpu to? And did you upgrade the psu and cpu?
@@paplayz honestly theres no need for a gpu upgrade or psu .
That was ok but you could have shown adding a fan cable splitter and adding another fan on the black grid area next to the sad hd area.
Love the new video effects you included!
Thank you!
Do they make side panels for this type of pc for better air flow with more vents.
U forgot the cpu cooler link!!
It is just a basic coolermaster one from a hp 30l
technically, couldn't you add a 80mm or 76mm fan for intake on the black side grill? I've seen other videos of people adding smaller fans to the side there using rubber isolators, and was thinking of doing the same myself. I'm not sure if there's a comfortably located 3 pin connecter for a fan though.
You could add one just either get a fan hub or something you can connect with the power supply to adapt to power your fan
Yup I did that. I bought a fan cable adapter and I'm able to add 2 more fans. I added a 40mm and an 80mm right below it since my gpu is too long. Fits perfectly.
@@kibt5227 What connector did you use? I want to that too!
I have it and Its just ok. I can't belive there's no way to make my own fan speed curve or anyway to adjust fan speeds in any way. Hp straight up says you can't with its motherboard. I'm looking to building my first pc because all of this.
Yea, I wish the motherboard gave us more freedom to mess with settings
@@PortzTech I added 2 additional case fans, one where the drive cage is and one pointing at the gpu. All noctua. Its an okay mod but without being able to adjust speeds it gets too hot still.
Upgrading anything on a PC is very easy as long you take the time to do it right in the first place.
That is very true
i watched your cpu video and i was wondering if you could use the cpu fan that come with the new cpu you bought or no? and if not could you wipe off the thermal paste off of the new fan on a napkin and put it on the old cpu fan
Yea, you can use whatever to clean the old stuff off. You should be able to use that fan. It should just bolt on. You can use the pre applied thermal grease if you want also
If you can please answer my questions? can you overclock the cpu and gpu ? And also you think you can upgrade the motherboard ?
you can upgrade the motherboard but you would have to change the case too. and i highly doubt u can do much over clocking if any at all. but im not too sure!
You could overclock things, I don’t know how much of a gain you would get though. You would have to swap cases for the motherboard swap though.
@@nini.26 thanks for helping out on the comments! Much appreciated!! :)
@@PortzTech no problem!!
hey man I also have another question ive had my pc for about a month now and my GPU temps have been going to 80-85 ive cleaned the fans but it still stays there what would be the best possible way to cool it down thanks again and I’ve just decided I’m not gonna have leds the green doesn’t really match the set up anyway
Get msi afterburner and edit your fan curve. Turn the fan up more at higher temps to keep it cooler. You can always run with the side panel off also
@@PortzTech you think If I get a better fan it would run cooler I’m thinking about replacing it with the fan you showed in this video
@@itzwillss It could, but if you want better cooling you could try to fit a aio cooler in it
I just did the upgrade fan is silent as heck and my gpu temps fell from 85 all the way to 70 and I’m running high settings thanks for the video bro
@@itzwillss which fan did u change bro and which one did u take?
Honestly speaking here, I'm not really sure why ANY of these companies making ROUND radiators bottom placements are even legally allowed to do it. The CPU chip was always designed square for a reason, so that thermals could be evenly controlled. Even throwing your basic Square radiator into this system drops the temps easily by 10 degrees, easily. When you throw a round-bottomed radiator onto a square surface & expect it not to damage the chip & over-heat, it's actually Quite Stupid, In Truth.
Also for the cooling fan I know it was just a random piece of equipment but is there a specific size we should be looking for or max size we can upgrade to?
It will probably not make much of a difference. Bigger would allow for more airflow though
80mm
@@clark3830 thank you
i just run it with the side panel off, now everything is nice and cool
Same, but I can’t put it back on with my 120mm noctua cpu cooler
Hey any chance you know where to get the light module for the HP that makes it light up green mine recently just stopped working
That would be hard to find. If I were you I find another led connect it to the power supply and put it were the green led was.
@@PortzTech Alright I’ll see what I can do thanks
@@itzwillss no problem. Let me know if you need help finding that stuff
Great video. Do you know if the lighting header on the motherboard is 5V or 12V?
@@charlescadogan8504 I would say its less than that since its very low powered and that the wire running to it is very high gauge wire
whats the mm size for the cpu cooler?
92mm
What a good thermal paste to use and how often am i suppose to it on the cpu
Is it possible to ad a Noctua NH-L9x65, Premium Low-Profile?
Yea, that should attach and work with it being low profile. I would just make sure they have amd version or attachment for the motherboard
@@PortzTech Would a Noctua NH-U9S 92mm fit in this pc?
Hello first off id like to thank you for making this amazing video, My question. Well, 2 questions. Could the stock 400w Platinum Power Supply on this rig be enough for a Ryzen 5 3600(currently r3 3500) and a (1650s 4gb) rx6600 8gb? I'm wanting to say yes but wasn't too sure wanted to research before pulling the trigger on it or even a 6600xt just curious if anyone is rocking this setup with this mainboard from Erica. Thanks in advance to any replies. Really want to avoid getting the 500w PSU, its way too overpriced for what it is.
Current Chip: 3500 6c6t 9mb L3 wanting to go to r5 3600 6c12t 32mb L3
Current GPU: GTX 1650s 4gb GDDR6 wanting to go to Rx6600 or Rx6600xt
Current Ram: Corsair LPX 2x16gb DDR4 3200mhz C16 (overclocked with ryzen master auto @ 1600) was 1x8gb 2666mhz
Current PSU: 400w Plat rated stock PSU (no plans to upgrade this psu I feel its sufficient)
Could you do a case swap video with this computer?
I just posted one last week
@@PortzTech yas gawd! I’ll be heading there now
Are there other better options for the cpu cooler because i need very good temps?
Yea, there are way better ones for sure
What option do you recomend if i want really good temps but i also have a hp pavalion pre but with an intel i5 11400f. So what option do you recomend me?
@@PortzTech What then? some links pls
@@jendeclercq703 Need to replace back plate on the back of the motherboard, but stuff like the Noctua U9S, Thermalright AK120 Mini/TS120 Mini will do the job
I saw a comment on hardware senses video and it said you could fit a 135mm cooler, if you want cheap than arctic freezer 7x, and for expensive I'm would say the noctua NH-C14S, personally I putting the 7x in my hp pavilion later on
Hardware senses video th-cam.com/video/lHvKGDXIY5A/w-d-xo.html
I have a question I don't really like the rgb at the front is there a way to get rid of that?
In the new case just swap the fans and on the old case unplug the rgb
I put added the same ram that you did but it only detects one you have any idea what I should do?
Make sure you push the ram all the way into the slot
So my I7-10700 is usually running at around 80 degrees what fan would work the most significant with that CPU?
Do you thing the Ryzen 7 5700x would work with the HP tg01-0023w? The only thing i could think what would prevent would be the bios.
I went with a 3700x
@huyra8019 I did as well. Pretty happy so far.
hey i have an question, is it possible to just change the cpu fan instead of the whole cpu cooler and if so what size is the fan on the cpu cooler ?
It should be possible, you have to use a 92mm Cooler
I have the same pc and the green light will blink every couple of minutes does yours do that?
My light does not do that
Are you talking about the main green light on the bottom of the front panel? You can go into omen gaming hub and turn that off
@@JaseProctor yeah I was figured it out shortly after commenting thank you though
I'm just wondering if you think that the RTX 2070 would fit inside the case
It would be tight if it did
Hello! Can you fit a watercooling in that pc?
Yea, it would be tight though
how much cooler did make your CPU?
It it slightly cooler than stock
@@PortzTech my CPU runs around 150F or so. Stock cooler
@@Justin_Strack Thats not bad just dont wanna go over 75-80 while under load
I wish hp would know how many people love this case. V series is going to annoy so many the same way, buy so many people love the green and black. They may should have enjoyed the success and made new proprietary stuff rather than shitting on owners that didn't buy omen
Can you tell me where can i buy this cooler?
I got it from another build. I would recommend getting one from amazon for amd
Thanks for the vid brother! Looking to switch from the 256nve to a 1tb here shortly. Wondering what's your input? I've followed literally everything you've done so far except the 1660 super swap. Thanks for the great content !!
I would recommend switching to that bigger nvme just for more space. Thank you for watching the whole build!!!
Hey bro, was wondering if you could help. So I’ve picked this pc up in the last few months (mine is a tg01-xxx or something and has a ryzen 3 4200g, not the same specs but I’m guessing the upgrade will work the same) and was wondering what I’d need to do to upgrade the case. I know the motherboard and case are specifically made for this pc, would they be the only things I would need to swap or is there other things in the pc that would need swapping if I wanted to change the case?
I don't believe you can transfer the mobo out to another case.
I just made a video on this. It is swapping the whole case and everything needed to do so. I would recommend watching it. It will answer most of your questions
Is there a big diference in temps?
Just a few degrees
Theres difference in temperature doing this change?
It is very slight. Just made my pc more quiet
Would a arctic esports duo 34 fit in this pc ??
What screwdriver do I need to unscrew the fan my flat head is too small
I would recommend a bigger flat head, I do not know the screwdriver off the top of my head sorry
that thermal paste is too little for ryzen, the pea size method only works for older intel chips, where the IHS was smaller, an x pattern is better for ryzen and newer intel chips.
Can you fit a 3070 in the 0023w?
It would be a tight fit and you would probably have to do some mods to your case
Can i use cooler master 240L argb
Dose it support 120mm fan
Se le puede poner una gtx 1660 ti?
What’s the fan size I wanna change these shity fabs
92mm for the case fan
@@christophscwhat abt the cpu fan
thank you!!!!
Anyone one know any cpu fans that'll work with this pc?
Please a link for the cooler
It is just a basic coolermaster one from a hp 30l
Good